The Prospector News

Orefinders Announces 14.3m of 4.18g/t Gold to Extend Tyranite at Depth, Discovers New Gold Mineralization Style

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Orefinders Announces 14.3m of 4.18g/t Gold to Extend Tyranite at Depth, Discovers New Gold Mineralization Style

 

 

 

 

 

Orefinders Resources Inc. (TSX-V: ORX) is pleased to announce assay results from its first completed diamond drill hole of the 9,000m drilling program on its 100% owned Knight Gold Project, in the Shining Tree Greenstone Belt 110km southwest of Kirkland Lake, Ontario.

 

This hole, TYR20-001, was targeted at the Tyranite Mine and its purpose was to test the continuity of mineralization at about 200 metres below the deepest levels that had previously been mined.

 

Depiction of First Drill Hole on Orefinders Tyranite Mine (Figure 1)

 

TYR20-001 Returned Two Distinct and Significant Intersections of Gold Mineralization:

 

  1. 4.18 g/t gold over 14.28m (true thickness is estimated to be 11 metres) between 615.72m and 630m downhole.
    1. This intersection was the target zone for hole TYR20-001 and successfully confirmed the continuity of Tyranite’s gold mineralization at least 200 metres below the mine’s previously excavated zone.
  2. 2.03 g/t gold over 9.0m (true thickness is estimated to be 8 metres) between 719m and 728m downhole.
    1. This mineralization was unexpected and Orefinders considers it to be a new discovery for Tyranite. The mineralization is mainly hosted by a syenitic intrusive body where it is brecciated, veined and altered near its contact with mafic volcanic rocks.
    2. The mineralization is thought to be of a similar style to that described at Alamos’ Young Davidson Mine, located about 40km to the north.
    3. This discovery adds to the Knight Project’s exploration potential with the knowledge that the syenite-associated mineralization style is present at Tyranite and potentially elsewhere on the Knight Project as well.

 

Further Technical Detail on Drill Hole TYR20-001

 

The first three drill holes at the Knight Gold Project are designed to validate the continuity, at depth, of the mineralized Tyranite Shear structure, beneath the historical workings at the Tyranite Mine that represents one of several drilling target areas at the Knight Gold Project. Drill hole TYR20-001 was completed on October 8, and the bulk of assays have now been returned. The second drill hole, TYR20-002, has been completed, and assays are pending. TYR20-001 and TYR20-002 are shown in a section in Figure 1. Drilling of the third hole, TYR20-003, is ongoing. All drill holes at the Knight Gold Project are oriented to allow measurements of structural features in the core.

 

Assay Results from TYR20-001


Positive assays results were returned from two mineralized intersections in TYR20-001. The cut-off grade used to calculate grade composites for both intersections is 1.0 g/t.

 

  1. Tyranite Shear Structure Mineralized Zone
    1. Mineralization associated with the Tyranite Shear structure was intersected between 615.72m and 630m.
    2. The calculated grade composite of the mineralized interval is 4.18 g/t gold over 14.28 m (Fig. 1). The true thickness of that mineralized zone is estimated to be approximately 11m where intersected by TYR20-001. The grade composite includes two one-metre intervals with 10.4 g/t and 10.9 g/t.
    3. Mineralization is hosted by sheared and brecciated mafic volcanic rocks cut by multiple sets of quartz-carbonate veins and containing several percent of sulphide grains (mainly pyrite).
    4. This result confirms the mineralized Tyranite Shear structure’s continuity to approximately 200m below the historical mine workings (Fig. 1).
  2. Syenite-Associated Mineralization in the Footwall
    1. Mineralization was intersected between 719m and 728m, in the footwall block beneath (to the East of) the Tyranite Shear structure (Fig. 1).
    2. The calculated grade composite of the mineralized interval is 2.03 g/t gold over 9.0m. Based on the measured orientations of its upper and lower contacts, the true thickness of that mineralized zone is estimated to be approximately 8m.
    3. The mineralized zone is mainly hosted within a syenitic intrusive body. It is brecciated and cut by multiple sets of quartz-carbonate veins near its lower contact with mafic volcanic rocks. Sulphide grains (mainly pyrite) are present within veins and are also disseminated in the altered syenite. Disseminated mineralization is also present within the mafic volcanic rocks immediately below the contact with the syenite body.
    4. The mineralization style has not been previously recognized in the footwall of the Tyranite Shear structure. It is thought to represent an example of the syenite-associated disseminated gold mineralization style known within several gold deposits in the southern Abitibi greenstone belt, indicating the presence of multiple types of gold mineralization proximal to the Tyranite Shear structure.

 

QP Statement

 

The technical information in this news release has been reviewed and approved by Dr. Keith Benn, P.Geo., Vice President Exploration for Orefinders, a Qualified Person as defined in “National Instrument 43-101, Standards of Disclosure for Mineral Projects.”  For the exploration undertaken by Orefinders, all assay batches are accompanied by rigorous Quality Assurance procedures that include insertion of standards and blanks and verification assays in a secondary laboratory.  Quality Control results, including the laboratory’s control samples, are evaluated immediately on reception of batch results and corrections implemented immediately if necessary. 

 

About Orefinders Resources Inc.

 

Orefinders is a Gold exploration and development company focused exclusively on the Abitibi Greenstone Belt. The Company is listed on the Toronto Venture Exchange.

 

Posted November 5, 2020

Share this news article

MORE or "UNCATEGORIZED"


VIZSLA SILVER AGREES TO ACQUIRE NEWLY CONSOLIDATED PAST-PRODUCING SILVER DISTRICT IN THE EMERGING SILVER-GOLD-RICH PANUCO - SAN DIMAS CORRIDOR IN MEXICO

Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) i... READ MORE

March 28, 2024

Additional Drill Results Highlighted by Hole D-380 in Block 6 at Oko West, Intersecting 39.7 m Grading 5.27 g/t Au Including 2.8 m @ 14.18 g/t Au and 13.0 m Grading 10.50 g/t Au

Reunion Gold Corporation (TSX-V: RGD) (OTCQX: RGDFF) is pleased t... READ MORE

March 28, 2024

STLLR Gold’s Tower Gold Project Infill Drilling Continues to Confirm Mineralization at the Jonpol Deposit

STLLR Gold Inc. (TSX: STLR) (OTCQX: STLRF) (FSE: O9D) announces ... READ MORE

March 28, 2024

Hudbay Provides Annual Reserve and Resource Update and Production Outlook

Consolidated copper production is expected to average 153,000i to... READ MORE

March 28, 2024

Aya Gold & Silver: Record 2023 Production, Revenue and Operating Cash Flow

Aya Gold & Silver Inc. (TSX: AYA) (OTCQX: AYASF) is pleased t... READ MORE

March 28, 2024

Copyright 2024 The Prospector News