The Prospector News

K2 Gold Closes Oversubscribed Second/Final Tranche of Private Placement Financing

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

K2 Gold Closes Oversubscribed Second/Final Tranche of Private Placement Financing

 

 

 

 

 

K2 Gold Corporation (TSX-V: KTO) (OTCQB: KTGDF) (FSE: 23K) announced that further to its news release dated June 24, 2024 regarding the non-brokered private placement financing of up to 15,000,000 units at a price of $0.10 per Unit for gross proceeds to the Company of up to $1,500,000, and the news release dated August 15, 2024 announcing closing of the First Tranche of the non-brokered private placement financing by way of issuance of 9,500,000 Units for gross proceeds of $950,000, it has closed the oversubscribed second/final tranche of the Offering. Under the Second Tranche, the Company has issued 7,925,000 Units for gross proceeds of $792,500.00.

 

Each Unit will consist of one common share in the capital of the Company and one non-transferable common share purchase warrant. Each Warrant will be exercisable to acquire one Share at a price of CDN$0.30 per Share for a period of 12 months from the date of issuance subject to an acceleration clause. If the 10-day volume-weighted average trading price of the Shares as quoted on the TSX Venture Exchange is equal to or greater than $0.35 at the close of any trading day, then the Company may, at its option, accelerate the expiry date of the Warrants by issuing a press release announcing that the expiry date of the Warrants shall be deemed to be on the 30th day following the issuance of the Warrant Acceleration Press Release. All Warrants that remain unexercised following the Accelerated Expiry Date shall immediately expire and all rights of holders of such Warrants shall be terminated without any compensation to such holder.

 

K2 intends to use the net proceeds raised from the Offering to complete the EIS permitting for the company’s Mojave Gold project located in Inyo County, California, USA, as well as exploration and general working capital.

 

The Company will pay finders fees in compliance with the policies of the TSX Venture Exchange and applicable securities legislation, to arm’s length finders in connection with subscriptions from subscribers introduced by them, totaling $46,350.00 and 463,500 warrants exercisable for 12 months from the date of issuance to acquire common shares of the Company at an exercise price of $0.30 per share. Finders Warrants have the same terms as the Unit Warrants.

 

Closing of the Offering is subject to certain customary conditions, including, but not limited to, the receipt of all necessary regulatory approvals and acceptance of the TSX Venture Exchange. All securities issued under the Offering will be subject to a statutory hold period of four month hold period in accordance with applicable Canadian securities laws. There are no material facts or material changes regarding the Company that have not been generally disclosed.

 

About K2 Gold

K2 is a proud member of Discovery Group and currently has projects in Southwest USA and the Yukon.

 

The Mojave Project is a 5,830-hectare oxide gold project with base metal targets located in California. Multiple previously recognized surface gold targets have been successfully drilled in the past, most notably by Newmont and BHP. Since acquiring the property, K2 has completed geochemical and geophysical surveys, geologic mapping, LiDAR, a WorldView 3 alteration survey, and successfully completed a 17-hole RC drill program focused on the Dragonfly and Newmont Zones. Highlights from K2’s drilling program include 6.68 g/t Au over 45.72m from surface at the Dragonfly Zone, and 1.69 g/t Au over 41.15m from 44.20m depth at the Newmont Zone.

 

The Wels Project lies approximately 40km east of the community of Beaver Creek and 60km south of Newmont Goldcorp’s Coffee deposit discovered by Kaminak Gold Corporation (formerly a Discovery Group company prior to its acquisition by Goldcorp-Newmont). Both the Coffee project and the Wels project lie within the Tintina Gold Belt, share similar characteristics, and are host to structurally controlled gold mineralization within intrusive rocks exhibiting multiple trends of mineralization.

 

K2’s 2023 Reverse Circulation drilling program at the Wels Project intersected gold in every drill hole, including the discovery of a new mineralized corridor at the Saddle South target. The Wels land position consists of 350 contiguous quartz claims covering 7,200 hectares and lies within the traditional territory of White River First Nation.

 

The Si2 Gold Project is located in Esmeralda County, approximately 60km northwest of Tonopah, Nevada, and 20km northwest of Allegiant Gold’s Eastside deposit (1.4Moz Au, 8.8 Moz Ag). The project is road accessible and consists of 118 BLM lode claims covering 986 Ha, 65 of which are under option from Orogen Royalties Inc. (TSX-V: OGN). The claims cover an 8 km2 area of steam heated alunite-kaolinite-buddingtonite alteration within a sequence of felsic to intermediate volcanic rocks displaying brecciation and strongly anomalous mercury.

 

K2’s 2023 diamond drill program at the Si2 Project confirmed that the system is gold bearing. The project was initially identified using the same methods, and by the same exploration team that identified AngloGold Ashanti’s 4.22 Moz Au Silicon project1 near Beatty, Nevada, and was staked based on its strong geological similarities to Silicon.

 

K2 is committed to transparency, accountability, environmental stewardship, safety, diversity, inclusion, and community and indigenous engagement.

 

Posted October 25, 2024

Share this news article

MORE or "UNCATEGORIZED"


Millennial Announces Closing Private Placement for Total Proceeds of $9,188,880

Millennial Potash Corp. (TSX-V: MLP) (OTCQB: MLPNF) (FSE: X0D) is... READ MORE

July 31, 2025

Laramide Resources Announces Closing of Upsized $12,000,000 Private Placement

Laramide Resources Ltd. (TSX: LAM) (ASX: LAM) (OTCQX: LMRXF)  a ... READ MORE

July 31, 2025

SPC Nickel Closes $3.5 Million Rights Offering Backstopped by Dundee Corporation

SPC Nickel Corp. (TSX-V: SPC) and Dundee Corporation (TSX: DC.A) are pl... READ MORE

July 31, 2025

St. Augustine Announces Positive Results of the Kingking Copper-Gold Project Updated Preliminary Feasibility Study

NPV7% of $4.18 Billion After-tax IRR of 34.2% at $4.30/lb Copper ... READ MORE

July 31, 2025

Independence Gold Intersects 52.46 Metres Grading 2.51 g/t Gold and 19.73 g/t Silver in the Johnny Vein at the 3Ts Project, BC Independence Gold Corp. (TSX-V: IGO) is pleased to report assay results from three additional diamond drill holes completed at the Johnny Vein System at the 3Ts Project located in central British Columbia. These results further confirm the continuity and high-grade nature of the Johnny Vein System and expands the known footprint of mineralization. Located approximately 185 kilometres southwest of Prince George, British Columbia, the 3Ts Project comprises thirty-one mineral claims covering approximately 35,486 hectares in the Nechako Plateau region. The project lies 16 km southwest of Artemis Gold Inc.'s Blackwater Mine and hosts a low-sulphidation epithermal quartz-carbonate vein district within which at least nineteen known mineralized veins, ranging from 50 to over 1,100 metres in strike length and true widths of up to 32 m have been identified. Highlights from diamond drilling include: • Hole 3TS-25-31 intersected a broad zone of mineralization grading 2.51 g/t gold and 19.73 g/t silver over 52.46 metres (true width approximately 32m), including: o 2.32m grading 9.83 g/t gold and 28.02 g/t silver o 2.90m grading 7.16 g/t gold and 63.10 g/t silver o 1.14m grading 18.46 g/t gold and 33.33 g/t silver • Hole 3TS-25-29 returned 7.94 metres grading 2.65 g/t gold and 10.71 g/t silver (true width approximately 7.46m), including 1.94 metres of 7.53 g/t gold and 32.47 g/t silver. • Hole 3TS-25-30 returned 5.90 metres of 1.86 g/t gold and 17.29 g/t silver (true width approximately 5.54m), including 0.72 metres of 4.00 g/t gold and 26.39 g/t silver. "These results further validate the Johnny Vein System as a high-grade, laterally extensive target with strong potential for resource expansion," stated Randy Turner, President & CEO of Independence Gold. "We are particularly excited by the width and grade intersected in hole 3TS-25-31, which demonstrates consistent mineralization over more than 30 metres of true width and includes multiple zones of exceptional gold and silver values." The Johnny Vein System is one of several epithermal quartz-carbonate veins being explored at the 3Ts Project and appears to be comprised of several intertwining veins with mineralized breccias that produce wide zones of mineralization. The primary vein set is interpreted to have a true thickness of approximately 32 metres; however, including adjacent mineralized breccias and minor veins, the total mineralized width may extend up to 47.5 metres true width. The Johnny Vein indicates similarities in grade and continuity to the established Ted-Mint and Tommy Vein Systems, which form the foundation of the current 3Ts resource model (please see news release dated August 18th, 2022 for further details; "Technical Report on the Mineral Resource Estimate Update for the 3Ts Gold Project, Omineca Mining Division, British Columbia, Canada", authored by Armitage and Miller). The combined in-pit and underground components of Tommy and Ted-Mint vein systems contain a total inferred resource estimate of 4,469,297 tonnes grading 3.64 grams per tonne gold and 96.26 g/t silver, at a cut off grade of 0.4 g/t gold equivalent ("AuEq") in-pit and 2.0 g/t AuEq underground, containing 522,330 ounces of gold and 13,831,415 ounces of silver, totaling 678,156 AuEq ounces. Drill results from the Johnny Vein System will be incorporated in the updated NI 43-101 mineral resource anticipated to be completed in the third quarter of 2025. Drill Hole From (m) To (m) Interval (m) Gold (g/t) Silver (g/t) 3TS-25-29 4.00 6.00 2.00 1.15 9.50 and 10.00 11.80 1.80 0.61 3.89 and 20.92 21.66 0.74 2.85 9.46 and 25.66 27.53 1.87 4.09 20.32 and 33.00 38.00 5.00 1.22 2.40 and 44.06 52.00 7.94 2.65 10.71 including 44.06 46.00 1.94 7.53 32.47 3TS-25-29 63.17 63.68 0.51 1.10 13.73 and 66.00 66.70 0.70 1.71 28.57 and 71.00 74.00 3.00 0.75 15.33 and 80.68 86.58 5.90 1.86 17.29 and 88.00 91.00 3.00 0.80 2.00 and 102.70 104.88 2.18 2.03 4.13 3TS-25-31 65.05 66.50 1.45 4.68 5.52 and 67.69 68.10 0.41 6.24 4.88 and 73.54 126.00 52.46 2.51 19.73 including 79.18 81.50 2.32 9.83 28.02 and including 87.10 90.00 2.90 7.16 63.10 and including 109.36 110.50 1.14 18.46 33.33 and 155.00 156.54 1.54 1.82 5.84 Table 1: Significant Intercepts from the Johnny Vein *The true widths of the veins are average 80-95% of the reported interval width QA/QC Protocols Samples consist of saw-cut (NQ) drill core with one-half retained for reference and one-half submitted for analysis. Samples were submitted in sealed plastic bags delivered to Bandstra Transportation for shipping to SGS Natural Resources Canada (SGS) labs in Burnaby, British Columbia, for sample preparation and analysis. Robotic sample preparation is used to ensure reproducibility and samples are pulverized to greater than 85% passing 75 microns. All samples are submitted for four acid digest with an ICP finish. Gold grades are obtained by fire assay with AAS finish. Samples which return greater than 10 parts per million gold and 100 parts per million silver are resubmitted for fire assay with a gravimetric finish. Sample batches consist of core samples, control standards, blanks and duplicates. Blanks and control standards (QAQC) are inserted into each batch of samples, with one QAQC per 20 samples. QAQC samples that return values 10% outside of the expected range require samples from that internal batch to be rerun by the lab. SGS laboratories operate under a Quality Management System that complies with ISO/IEC 17025. SGS's minerals laboratory in Burnaby is accredited by the Standards Council of Canada (SCC) for specific mineral tests listed on the scope of accreditation to the ISO/IEC 17025 standard. Please see SGS Analytical Methods for further details regarding analytical procedures. About Independence Independence Gold Corp. is a well-financed mineral exploration company with holdings ranging from early-stage grassroots exploration to advanced-stage resource expansion in British Columbia and Yukon. The Company is positioned to add shareholder value through systematic project advancement, while management continues to evaluate additional gold and silver projects for possible acquisition. For additional information, visit the Company's website www.ingold.ca. Andy Randell, P.Geo., the Company's Qualified Person as defined by National Instrument 43-101 and who is an independent consultant for the Company, has reviewed the technical information in this news release. Drill Hole Information from this release Drill Hole Easting Northing Elevation Azimuth* Dip Total Meterage 3TS-25-29 363045 5876905 1218 170 70 144 3TS-25-30 363067 5876940 1216 270 70 106 3TS-25-31 363067 5876940 1216 220 65 158 * All drill hole locations are in NAD83, Zone 10 Datum **Based on true north. For magnetic declination add 17.5 degrees

Independence Gold Corp. (TSX-V: IGO) is pleased to report assay r... READ MORE

July 31, 2025

Copyright 2025 The Prospector News