The Prospector News

Imperial Drilling Intersects 257.5 Metres Grading 0.71% Copper and 0.39 g/t Gold at Mount Polley

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Imperial Drilling Intersects 257.5 Metres Grading 0.71% Copper and 0.39 g/t Gold at Mount Polley

 

 

 

 

 

 

Imperial Metals Corporation (TSX:III) reports diamond drill results from three more holes of the Mount Polley 2024 exploration program, including a notable interval of 257.5 metres grading 0.71% copper and 0.39 g/t gold from 35.0 metres in diamond drill hole SD-24-180. This phase of drilling is ongoing and is following up on the significant results obtained in the 2023 drill programs.

 

Hole SD-24-180 was a vertical hole located 33 metres northwest from previously released hole SD-24-179 which intersected 270 metres grading 0.65% copper and 0.48 g/t gold from 22.5 metres on section 3230N. Holes SD-24-180 and SD-24-179 were planned to target gaps in the southwest edge of the Springer Pit at both shallow and deep levels. The first 135.5 metres of this intercept are within the current ultimate pit design for the Springer Pit. The portion of this hole beneath the ultimate pit tests an area that has been studied for potential underground mining.

 

Significant intercepts:

 

Hole ID From (m) To (m) Width (m) Copper (%) Gold (g/t)
SD-24-180 35.0 292.5 257.5 0.71 0.39
including 187.5 292.5 105.0 1.13 0.58
including 202.5 287.5 85.0 1.29 0.65

 

Hole SD-24-180 had 18 metres of casing and encountered the first recoverable core at 33 metres. The lithology throughout the entire hole closely resembles hole SD-24-179 and alternates between intense crackle breccia to moderately pseudo-brecciated monzonite to monzodiorite, with strong potassium feldspar, biotite, calc-silicate, albite and magnetite alteration. Copper mineralization throughout the hole is dominantly disseminated with veinlet-controlled chalcopyrite and trace bornite. Similar to hole SD-24-179, hole SD-24-180 intersects pervasive calc-silicate and magnetite alteration three times, providing pockets with a higher percentage of chalcopyrite.

 

Hole SD-24-178 was an angled hole oriented at 225°/-60° and was collared on the north rim of the current Springer Pit. The hole was planned to test the extent of mineralization of the Springer Pit near a fault that appears to form the northern boundary of Springer mineralization. The first 143 metres of this hole are within the ultimate pit design. The hole intersected 12.5 metres of 0.28% copper and 0.39 g/t gold starting at 30 metres along with some lower grade intervals in the pit that will be mined in the Phase 5 pushback of the Springer pit. Mineralization within the pit may provide some additional mill feed from upper benches of the Phase 5 pushback.

 

Hole SD-24-181 was a vertical hole collared on the eastern edge at the bottom of the Springer Pit. The hole was designed to test potential mineralization further to the east at depth. Hole SD-24-181 intersected two notable intervals of gold mineralization. The first interval had a width of 22.5 metres grading 0.18% copper and 0.44 g/t gold from 42.5 metres and is within the current pit design. The second interval had a width of 35 metres grading 0.17% copper and 0.49 g/t gold from 107.5 metres and is beneath the current ultimate pit design.

 

Jim Miller-Tait, P.Geo., Imperial’s VP Exploration, has reviewed this news release as the designated Qualified Person as defined by National Instrument 43-101 for the Mount Polley exploration program. Samples reported were analysed at Bureau Veritas Mineral Laboratories in Vancouver. A full QA/QC program using blanks, standards and duplicates was completed for all diamond drilling samples submitted to the labs. Significant assay intervals reported represent apparent widths. Insufficient geological information is available to confirm the geological model and true width of significant assay intervals.

 

Diamond drill data, cross sections and plan view maps are available on Imperialmetals.com.

 

About Imperial

 

Imperial is a Vancouver based exploration, mine development and operating company with holdings that include the Mount Polley mine (100%), the Huckleberry mine (100%), and the Red Chris mine (30%). Imperial also holds a portfolio of 23 greenfield exploration properties in British Columbia. These properties have defined areas of mineralization and clear exploration potential. Management continues to evaluate various opportunities to advance many of these properties.

 

Posted May 22, 2024

Share this news article

MORE or "UNCATEGORIZED"


Great Pacific Gold Announces Closing of Upsized $16.9 Million Private Placement Financing Led by Canaccord Genuity Corp

Great Pacific Gold Corp. (TSX-V: GPAC) (OTCQX: FSXLF) (FSE: V3H)... READ MORE

July 3, 2025

Ridgeline Minerals Provides Assay Results and Drill Program Updates for the Big Blue and Atlas Projects

Big Blue highlights: 0.6 meters grading 0.7% Cu, 3,194 g/t Ag and... READ MORE

July 3, 2025

Goldshore Intersects 42.7m of 1.09 g/t Au at the Eastern QES Zone of the Moss Deposit

Goldshore Resources Inc. (TSX-V: GSHR) (OTCQB: GSHRF) (FSE: 8X00)... READ MORE

July 3, 2025

Dios Sells K2 to Azimut

Dios Exploration Inc. (TSX-V: DOS) is pleased to report it has e... READ MORE

July 3, 2025

Northisle Announces Near Surface Intercepts and Higher-Grade Intercepts at Depth at West Goodspeed on its North Island Project

Highlights: Recent drilling at West Goodspeed supports the presen... READ MORE

July 3, 2025

Copyright 2025 The Prospector News