Gold X2 Mining Inc. (NYSE American: AUXX) (TSX-V: AUXX) (FSE: DF80), is pleased to announce the results of its phase one drilling campaign conducted at the Span Prospect, approximately 2 kilometers northeast of the eastern edge of the Moss Gold Deposit in Northwest Ontario, Canada.

Michael Henrichsen, CEO of Gold X2, commented, “We are encouraged with our early-stage drilling at the Span prospect as we look to discover the northeast offset extension of the Moss Deposit. The Company plans to follow up on the 40.4m of 2.05 g/t Au intercept with an additional drill rig arriving on site this week to extend the mineralization toward the surface and to the east-northeast.”

Highlights

• Eight holes were drilled along strike of the historical Span prospect to evaluate the potential for near surface ounces. Drilling discovered a strongly mineralized set of shear zones to the east of the historical drilling with an intercept of:

• 40.4m of 2.05 g/t Au from 343.6m in MSD-26-404m, including
  • 24.05m of 3.17 g/t Au from 345.95m

• Drilling also discovered a second parallel shear hosted in a narrow Moss Deposit style diorite intrusion with select intercepts of:

• 5.0m of 5.34 g/t Au from 161.0m in MSD-26-397, including
  • 2.0m of 12.7 g/t Au from 161.0m

• 11.0m of 1.22 g/t Au from 233m in MSD-26-401

• An additional three holes were drilled into the existing Span Prospect to confirm historical drilling results and continuity. Drilling intersected tightly spaced narrow shear zones that returned results in line with historical drilling from the 1980s, including localized high-grade shears within a lower-grade envelope. Select results include:

• 30.0m of 0.38 g/t Au from 377.0m in MSD-26-395

• 7.15m of 2.60 g/t Au from 262.9m in MSD-26-427, including
  • 4m of 4.34 g/t Au from 265.0m in MSD-26-427

Technical Overview

The results of eleven holes drilled into and along strike of the Span Prospect are illustrated in the following figures and tables. Figure 1 shows the location map of the drill holes reported in this release. Figure 2 provides a cross-section through the headline drill hole MSD-26-404. The results are summarized in Tables 1 to 2, which include significant intercepts (Table 1) and drill hole locations (Table 2).

Figure 1: Shows the location of the of the Span Prospect as a possible NE offset of the Moss Gold Deposit

Figure 2: Shows the location of the drill holes across the Span Prospect

Figure 3: Shows a cross section through drill holes MSD-26-391 and MSD-26-404 with reported intersections

Gold X2 resumed its district exploration drill program with an 11-hole (4,581m) drilling campaign at the Span Prospect, targeting the northeast offset extension of the Moss Deposit approximately two kilometers northeast of the current resource pit boundary. The program was designed to confirm historical intercepts at the prospect and to explore for strike extensions and new shear zones based on encouraging grab, soil, and geophysical results. The aim of the drill program is to evaluate the potential to add a meaningful Inferred Mineral Resource to the current Moss Gold Mineral Resource and expand the mine plan.

The Span Prospect was historically drilled by Inco during the late 1980s and again by Wesdome Gold Mines in 2017. They noted nine mineralized zones hosted in sheared rhyolite with abundant quartz-carbonate veining and moderate pyrite-chalcopyrite. They unsuccessfully attempted to locate the extension of the Span Prospect by following mapped shears along a 65° strike, which mimics the direction of the Moss Gold Deposit shears.

Gold X2 drilling intersected a strongly silica and hematite altered dacitic volcanic unit with localized meter-scale diorite dykes and interbedded, lesser altered andesitic volcanic rocks. The main Span shear is hosted in sheared, sericite-silica-hematite altered dacites with 3-5% quartz carbonate veining and elevated sulphides ranging from 2-5%. MSD-26-404, a 75m step-out hole, followed a 45°-striking chargeability feature outlined by last year’s expanded IP gradient array program. It intersected the extension of the main Span shear in similar rocks with an intercept of 40.4m of 2.05 g/t Au from 343.6m, including 24.05m of 3.17 g/t Au from 345.95m.

A parallel shear was discovered approximately 200m northwest of the main Span shear. It is hosted in narrow Moss-style granodiorite intrusion that shares a geochemical signature with the primary Main and QES granodiorite bodies, which are significantly mineralized. A significant brittle fault structure was also discovered northwest of the prospect, potentially representing the extension of the Sloane fault, which lies immediately east of the QES Zone and suggested that the Span Prospect may represent the faulted offset of the Moss Gold Deposit.

A follow-up drill program is being designed to explore further along strike, as well as infill the prospect, to better understand the geological setting of the deposit. A third drill contractor is being mobilized to conduct this program to prevent diverting resources from the primary Moss expansion and infill drill programs. Drilling is expected to commence this month.

Figure 3: Hole MSD-26-404: Moderately sheared sericite-silica-hematite altered dacite volcanic with 5-10% deformed quartz carbonate veining and 3-5% disseminated pyrite with an intercept of 24.05m of 3.17 g/t Au from 349.95m, within the larger intercept of 40.4m of 2.05 g/t Au from 343.6m.

Table 1: Significant intercepts

43

0

Table 2: Drill Collars

Analytical and QA/QC Procedures

All drill core is NQ diameter drill core has been visually validated in the core shack, rotated, and reconnected. Structural orientation data was captured by acoustical and optical televiewer operated by DGI Geosciences. All core has been sawed in half cut just off a geologist established cutline aligned 90° from the apex of the foliation, with the right half (looking down hole) of the core bagged and sent a third-party analytical laboratory. The left half of the core was returned to core boxes and is stored at Gold X2’s Kashabowie core yard facility.

Samples were split between Paragon Geochemical in Timmins and ALS Geochemistry in Thunder Bay for sample preparation. Paragon samples were analysed for gold via PhotonAssay™ (“PA-AU02”) by Paragon’s laboratory in Hamilton and then shipped to Activation Laboratories (ActLabs) Ancaster for 60 pathfinder elements via ICP-MS after four-acid digestion (“UT-6”). ALS samples were analysed for gold via PhotonAssay (“Au-PA02“) in Thunder Bay and 48 pathfinder elements via ICP-MS after four-acid digestion (“ME-MS61“) in Vancouver. Paragon, ALS, and ActLabs are accredited by the Standards Council of Canada (SCC) for the Accreditation of Mineral Analysis Testing Laboratories and CAN-P-4E ISO/IEC 17025.

In addition to Paragon and ALS quality assurance / quality control protocols, Gold X2 has implemented a quality control program for all samples collected through the drilling program. The quality control program was designed by a qualified and independent third party, with a focus on the quality of analytical results for gold. Analytical results are received, imported to our secure on-line database and evaluated to meet our established guidelines to ensure that all sample batches pass industry best practice for analytical quality control. Certified reference materials are considered acceptable if values returned are within three standard deviations of the certified value reported by the manufacture of the material. In addition to the certified reference material, certified blank material is included in the sample stream to monitor contamination during sample preparation. Blank material results are assessed based on the returned gold result being less than ten times the quoted lower detection limit of the analytical method. The results of the on-going analytical quality control program are evaluated and reported to Gold X2 by Orix Geoscience Inc.

Qualified Person

Peter Flindell, PGeo, MAusIMM, MAIG, Chief Operating Officer, of the Company, and a qualified person under National Instrument 43-101 – Standards of Disclosure for Mineral Projects, has approved the scientific and technical information contained in this news release.

Mr. Flindell has verified the data disclosed. To verify the information related to the winter drill program at the Moss Gold Project, Mr. Flindell has visited the property several times; discussed and reviewed logging, sampling, bulk density, core cutting and sample shipping processes with responsible site staff; discussed and reviewed assay and QA/QC results with responsible personnel; and reviewed supporting documentation, including drill hole location and orientation and significant assay interval calculations. He has also overseen the Company’s health and safety policies in the field to ensure full compliance and liaised with the Project’s host indigenous communities on the planning and implementation of the drill program, particularly with respect to its impact on the environment and the Company’s remediation protocols.

About Gold X2 Mining

Gold X2 is a growth-oriented gold company focused on delivering long-term shareholder and stakeholder value through the acquisition and advancement of primary gold assets in tier-one jurisdictions. It is led by the ex-global head of structural geology for the world’s largest gold company and backed by one of Canada’s pre-eminent private equity firms. The Company’s current focus is the advanced stage 100% owned Moss Gold Project which is positioned in Ontario, Canada, with direct access from the Trans-Canada Highway, hydroelectric power near site, supportive local communities and skilled workforce. The 2026 updated NI 43-101 mineral resource estimate for the Moss and East Coldstream Deposits has expanded to 2.458 million ounces of Indicated gold resources at 1.04 g/t Au, contained within 73.8 million tonnes and 4.209 million ounces of Inferred gold resources at 0.97 g/t Au contained within 134.7 million tonnes. The Moss Deposit also has a silver MRE of 3.160 million ounces of indicated silver resources at 1.53 g/t Ag contained within 64.3 Mt and 6.273 million ounces of inferred silver resources at 1.55 g/t Ag contained within 125.9 Mt. Results of a preliminary economic assessment of the Moss Gold Project suggest the potential for the deposit to support a long-life mining operation with a strong production profile and low production costs. The MRE and PEA are supported by a NI 43-101 technical report for the Moss Gold Project available on the Company’s website and under the Company’s issuer profile on SEDAR+.