The Prospector News

FPX Nickel Announces Positive Step-Out Drill Results Expanding Van Target Mineralized Footprint to a Scale Comparable to Flagship Baptiste Nickel Deposit

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

FPX Nickel Announces Positive Step-Out Drill Results Expanding Van Target Mineralized Footprint to a Scale Comparable to Flagship Baptiste Nickel Deposit

 

 

 

 

 

FPX Nickel Corp. (TSX-V: FPX) (OTCQB: FPOCF) is pleased to announce additional drill results further confirming the significant lateral extension of the new nickel discovery at the Van Target in the Company’s Decar Nickel District in central British Columbia.  These drill results expand nickel mineralization approximately 1 km to the west of previous drilling, bringing the mineralized footprint at Van to approximately 2 km in strike length by 1 km in width.  Based on the first two drilling campaigns completed to-date, the scale of nickel mineralization at Van is trending toward being comparable to the Baptiste Deposit, which has a strike length of approximately 3 km with an average width of approximately 1 km.

 

Highlights

  • Drilling at Van has outlined strong nickel mineralization over a large footprint measuring approximately 2 km2, with mineralization open both laterally and at depth
  • Final set of Van drillholes reported herein (22VAN-013 to 22VAN-019) extend nickel mineralization by approximately 1 km to the west from previously reported holes
    • New drillhole 22VAN-016 intersected 426.9 m grading 0.127% DTR Nickel (0.204% Total Nickel), starting at an approximate vertical depth of 9 m below surface
  • The highest grades to-date at Van are in the southwest portion of the target area, where future step-out drilling is planned to test the further lateral and depth extension of mineralization

 

“On the basis of the first two modestly-sized drill campaigns, the Van discovery has quickly achieved an extensive footprint of broad and higher-grade near-surface nickel mineralization, confirming the potential of the Decar Nickel District to host multiple large-scale deposits,” commented Martin Turenne, the Company’s President, and CEO.  “Van remains open for expansion in multiple directions, most favourably to the south, southwest, and west, where the encouraging trend of higher-grade nickel in outcrop and drill results to-date suggest the potential for a significant extension of the already sizeable 2 km2 mineralized footprint.  While FPX is primarily focused the completion of a Baptiste preliminary feasibility study in the third quarter of 2023, we look forward to future drilling at Van to confirm our hypothesis that Van could ultimately host a significant near-surface nickel resource to complement the neighbouring Baptiste deposit.”

 

Link to view drill results within interactive 3D VRIFY model (for best results, view in full screen):

https://vrify.com/decks/12527?auth=8f2e9d49-0b9b-4e44-9fde-cfab2f50b9fc

 

Van Target Drilling 

 

The results described herein are from a ten-hole, 2,504 m drill program completed in 2022 at the Van Target, which is located 6 km north of Baptiste at a similar elevation, and also accessible via active logging roads (see Figure 1).  This drill program was designed to follow up on the inaugural drilling in 2021, stepping out aggressively from the initial discovery area to define the extent of mineralization up to 1 km south and 1.5 km west of the holes drilled in 2021.  The results of the first three holes from the 2022 program (22VAN-010 to 22 VAN-012) were previously reported in the Company’s December 12, 2022 news release.

 

The nickel mineralization at the Van target, as defined by just 19 holes drilled in 2021 and 2022, is approaching the scale of the Baptiste deposit, which measures 3 km along strike with an approximate width of 1 km.  Mineralization at the Van target remains open along strike to the west, southwest, and south, and at depth, confirming the potential for Van to host a large-scale, standalone nickel deposit.

 

Table 1 – Van Target Drill Hole Results

 

Hole Intersections1 DTR Nickel
(%)2
Total Nickel
(%)2
From To Length
22VAN-013 18.7 221.0 202.3 0.019 0.151
22VAN-014 2.3 316.1 313.8 0.038 0.187
including 2.3 144.0 141.7 0.056 0.212
22VAN-015 21.2 298.2 277.0 0.079 0.187
including 21.2 186.0 164.8 0.089 0.192
and 186.0 298.2 112.2 0.064 0.179
22VAN-016 12.4 439.3 426.9 0.127 0.204
including 12.4 115.4 113.0 0.127 0.194
including 115.4 280.0 164.6 0.121 0.215
including 280.0 439.3 159.3 0.134 0.201
22VAN-017 13.1 178.3 165.2 0.087 0.191
including 13.1 116.0 102.9 0.100 0.179
22VAN-018 16.0 116.0 100.0 0.080 0.186
22VAN-019 8.4 106.0 97.6 0.035 Note3

The vertical depth (true width) of all quoted intersections in this news release is interpreted to be approximately 75% of downhole depth.

2 All mineralized core samples are assayed for “Total Nickel” and “Davis Tube Recoverable Nickel.”  “DTR Nickel” analyses measure only the magnetically recoverable nickel hosted in medium- to coarse-grained awaruite (nickel-iron alloy), whereas the “total nickel” analyses measures both magnetically and non-magnetically recoverable y nickel, the latter hosted in fine-grained awaruite or nickel sulphide minerals. The Davis Tube method is a bench-scale metallurgical test procedure which provides an estimation of magnetically recoverable nickel and is the global industry-standard geometallurgical test for magnetic recovery operations and exploration projects.  See “Sampling and Analytical Method”, below.

Due to laboratory delays, Total Nickel assays for 22VAN-019 not available as of the date of this news release.

 

The nickel mineralization intersected within 22VAN-013 through to 22VAN-019 is characterized by disseminated, fine- to coarse-grained awaruite (nickel-iron alloy) mineralization hosted in serpentinized ophiolitic rocks and is very analogous to the mineralization and geological setting at the Baptiste Deposit.

 

22VAN-013 was collared 1.3 km west of 21VAN-005 and drilled to the north-northeast at minus 55 degrees.  The hole encountered bedrock at 18.7 meters (approximately 14 m vertical depth) and thereafter intersected 201.4 m of low-grade awaruite mineralization (averaging 0.019% DTR Ni) to a downhole depth of 221 m.

 

22VAN-014 was collared 700 m north of 22VAN-013 and drilled to the north-northeast at minus 55 degrees.  The hole encountered bedrock at 2.3 m downhole and thereafter intersected low-grade awaruite mineralization (averaging 0.038% DTR Ni) to a downhole depth of 316.1 m.

 

22VAN-015 was collared 250 m northwest of 21VAN-006 and drilled to the north-northeast minus 55 degrees.  The hole encountered bedrock at 21.2 m downhole and thereafter intersected 277 m of medium-grade awaruite mineralization (averaging 0.079% DTR Ni), to a downhole depth of 298.2 m.  Mineralization in this drillhole remains open at depth.

 

22VAN-016 was collared in the same location as 22VAN-015 and drilled to the southwest at minus 55 degrees.  The hole encountered bedrock at 12 m downhole and thereafter intersected 426.9 m of high-grade awaruite mineralization (averaging 0.127% DTR Ni) to a downhole depth of 439.3 m.  Mineralization in this drillhole remains open at depth.

 

22VAN-017 was collared 500 m west along section from 22VAN-016 and drilled to the north-northeast at minus 55 degrees.  The hole encountered bedrock at 13.1 m downhole and thereafter intersected 165.2 m of medium-grade awaruite mineralization (averaging 0.087% DTR Ni) to a downhole depth of 178.3 m.

 

22VAN-018 was collared in the same location as 22VAN-017 and drilled to the south-southwest at minus 55 degrees.  The hole encountered bedrock at 16 m downhole and thereafter intersected 100 m of medium-grade awaruite mineralization (averaging 0.080% DTR Ni) to a downhole depth of 116 m.  Mineralization in this drillhole remains open at depth.

 

22VAN-019 was collared 800 m south-southeast of 22VAN-013 and drilled to the north-northeast at minus 55 degrees.  The hole encountered bedrock at 8.4 m downhole. This drillhole intersected low-grade awaruite mineralization (averaging 0.035% DTR Ni) and was terminated at 106 m.

 

Sampling and Analytical Method

HQ & NQ size drill core were quartered and halved, respectively, on-site using a diamond blade core cutting saw.  Drill core was sampled continuously downhole at nominal 4 m intervals except for post mineralization dikes and non-mineralized rock types as they historically have had zero grade.  Samples were bagged and sealed with tamper proof tags and shipped to Activation Laboratories in Kamloops, British Columbia, for sample preparation. Sample preparation involved crushing the entire sample to 90% passing 2 mm, riffle splitting 250 g, and pulverizing the split to 95% passing 74 microns. Analytical work was completed at Activation Laboratories in Ancaster, Ontario and included lithium metaborate/tetraborate fusion ICP and DTR Ni analysis.  DTR Ni analysis involved processing a 30 g split of the pulp through a Davis tube magnetic separator as a slurry using a constant flow rate of 400 millilitres per minute, a magnetic field strength of 3,500 Gauss, and a tube angle of 45 degrees to produce magnetic and non-magnetic fractions.  The magnetic and non-magnetic fractions were dried, weighed and the magnetic fraction was analyzed by fusion X-Ray Fluorescence for multiple elements, including nickel, cobalt, iron and chromium.  The DTR Nickel grade was then calculated by multiplying the XRF fusion nickel value by the weight of the magnetic fraction and dividing by the total recorded feed weight.

 

QA/QC procedures involved the analysis of field and prepared duplicates, DTR replicates, insertion of certified reference materials, and non-certified blanks to assess the accuracy and precision of the Davis tube magnetic separation and XRF analysis that are used to determine the DTR Nickel content.  The Davis Tube method is a bench-scale metallurgical test procedure which provides an estimation of magnetically recoverable nickel and is the global industry-standard geometallurgical test for magnetic recovery for operations and exploration projects.

 

Erin Wilson, P. Geo., FPX Nickel’s Qualified Person under NI 43-101, has reviewed and approved the technical content of this news release.

 

About the Decar Nickel District

 

The Company’s Decar Nickel District claims cover 245 km2 of the Mount Sidney Williams ultramafic/ophiolite complex, 90 km northwest of Fort St. James in central British Columbia. The District is a two-hour drive from Fort St. James on a high-speed logging road.

 

Decar hosts a greenfield discovery of nickel mineralization in the form of a naturally occurring nickel-iron alloy called awaruite (Ni3Fe), which is amenable to bulk-tonnage, open-pit mining. Awaruite mineralization has been identified in four target areas within this ophiolite complex, being the Baptiste Deposit, and the B, Sid and Van targets, as confirmed by drilling, petrographic examination, electron probe analyses and outcrop sampling on all four targets.  Since 2010, approximately US $28 million has been spent on the exploration and development of Decar.

 

Of the four targets in the Decar Nickel District, the Baptiste Deposit, which was initially the most accessible and had the biggest known surface footprint, has been the focus of diamond drilling since 2010, with a total of 99 drillholes and 33,700 m of drilling completed.  The Sid target was tested with two holes in 2010 and the B target had a single hole drilled in 2011; all three holes intersected nickel-iron alloy mineralization over wide intervals with DTR Nickel grades comparable to the Baptiste Deposit.  In 2021, the Company executed an inaugural drilling program at Van which returned results comparable with the strongest results at Baptiste.

 

About FPX Nickel Corp.

 

FPX Nickel Corp. is focused on the exploration and development of the Decar Nickel District, located in central British Columbia, and other occurrences of the same unique style of naturally occurring nickel-iron alloy mineralization known as awaruite.

 

Posted January 4, 2023

Share this news article

MORE or "UNCATEGORIZED"


VIZSLA SILVER AGREES TO ACQUIRE NEWLY CONSOLIDATED PAST-PRODUCING SILVER DISTRICT IN THE EMERGING SILVER-GOLD-RICH PANUCO - SAN DIMAS CORRIDOR IN MEXICO

Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) i... READ MORE

March 28, 2024

Additional Drill Results Highlighted by Hole D-380 in Block 6 at Oko West, Intersecting 39.7 m Grading 5.27 g/t Au Including 2.8 m @ 14.18 g/t Au and 13.0 m Grading 10.50 g/t Au

Reunion Gold Corporation (TSX-V: RGD) (OTCQX: RGDFF) is pleased t... READ MORE

March 28, 2024

STLLR Gold’s Tower Gold Project Infill Drilling Continues to Confirm Mineralization at the Jonpol Deposit

STLLR Gold Inc. (TSX: STLR) (OTCQX: STLRF) (FSE: O9D) announces ... READ MORE

March 28, 2024

Hudbay Provides Annual Reserve and Resource Update and Production Outlook

Consolidated copper production is expected to average 153,000i to... READ MORE

March 28, 2024

Aya Gold & Silver: Record 2023 Production, Revenue and Operating Cash Flow

Aya Gold & Silver Inc. (TSX: AYA) (OTCQX: AYASF) is pleased t... READ MORE

March 28, 2024

Copyright 2024 The Prospector News