The Prospector News

Aurion Drills 29.10 g/t Au Over 3.10 m and Expands Gold Mineralized System at Kaaresselkä on the Wholly Owned Risti Property

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Aurion Drills 29.10 g/t Au Over 3.10 m and Expands Gold Mineralized System at Kaaresselkä on the Wholly Owned Risti Property

 

 

 

 

 

  • Gold mineralized system expanded in multiple directions at the Vanha prospect
  • Gold intersects include 29.10 g/t Au over 3.10 m, 3.35 g/t Au over 9.85 m, 2.77 g/t Au over 9.00 m, 3.92 g/t Au over 5.65 m, 1.00 g/t Au over 16.60 m and 2.32 g/t Au over 4.05 m
  • Follow up drilling at Vanha and testing selected scout drill targets planned for 2024
  • Aurion is fully funded for all planned activities

 

Aurion Resources Ltd. (TSX-V: AU) (OTCQX: AIRRF) announces results for nine holes from the 2024 drilling program at the Kaaresselkä area of its wholly owned Risti property located in the Central Lapland Greenstone Belt in northern Finland.

 

Summary

  • Gold mineralized system expanded in multiple directions at the Vanha prospect in the Kaaresselkä Area:
    • 29.10 g/t Au over 3.10 m from 20.10 m (KS24079), 100 m north of the Vanha Main trend
    • 3.35 g/t Au over 9.85 m from 259.75 m (KS24079), extending the mineralized system to depth by 50 m in the western part of the Vanha Main trend
    • 2.77 g/t Au over 9.00 m from 85.30 m and 2.32 g/t Au over 4.05 m from 114.05 m (KS24081), 3.92 g/t Au over 5.65 m from 64.90 m (KS24080), extending the mineralized system 100 m towards west
    • 1.00 g/t Au over 16.60 m from 99.30 m (KS24076) in the eastern part of the mineralized system
    • Drilling continues to intersect broad zones of strongly deformed and hydrothermally altered rocks
    • Gold intersected over 600 m along strike and to 200 m depth at Vanha – open in all directions
  • Follow up drilling at Vanha and testing selected scout drill targets planned for 2024
  • Aurion is fully funded for all planned activities

 

Comments

 

“The potential for a significant mineralized system at Kaaresselkä continues to increase with each program. All six holes drilled at the Vanha prospect (Kaaresselkä area) intersected gold, including intervals of 29.10 g/t Au over 3.10 m, 3.35 g/t Au over 9.85 m and 2.77 g/t Au over 9.00 m, and expanded the mineralized system in multiple directions.” commented Matti Talikka, Aurion CEO. “Aurion is fully funded for planned exploration activities including follow up drilling at Kaaresselkä and testing selected scout drill targets within our 100% owned Risti property.”

 

Figures referenced in this release can be viewed at: https://aurionresources.com/site/assets/files/1555/nr24-12figures.pdf.

 

Kaaresselkä Prospect

 

Aurion drilled nine holes, totaling 2,034.40 m, in the Kaaresselkä area. The holes targeted interpreted structural features with an aim to identify and/or extend the gold mineralized system.

 

All six holes drilled at the Vanha prospect and reported in this press release intersected zones of gold mineralization. According to the recent results, the Vanha mineralized system is interpreted to extend 100 m towards west and deeper in the western part of the Vanha trend. In addition, high-grade mineralization was intersected at shallow depths 100 m north of the Vanha Main trend. All Vanha holes intersected broad zones of strongly deformed and hydrothermally altered rocks associated with gold mineralization.

 

The gold mineralized system at Vanha is interpreted to extend over 600 m along strike and to at least 200 m depth. The gold mineralization is open along strike and at depth. Scout drill holes, which intersected gold up to 1.8 km to the west and 600 m to the east of the Vanha prospect (press release Nov 13, 2023), highlight the potential for an extensive gold mineralized system in the Kaaresselkä area.

 

The Kaaresselkä area is located 15 km east of the recent Vuoma discovery (28.64 g/t Au over 4.90 m) by Aurion-B2Gold JV, along the mainly unexplored, structural corridor that extends over 25 km within Aurion’s fully owned Risti property and the JV with B2Gold.

 

The gold mineralization at Vanha is mainly hosted by highly deformed and altered (silica, sericite, albite) mafic volcanic and metasedimentary rocks with minor to moderate amounts of fine-grained sulphide minerals including pyrite, pyrrhotite, chalcopyrite, galena, sphalerite and arsenopyrite in varying quantities. The higher-grade intervals are mainly hosted within silicified and brecciated zones with a moderate amount of sulphides. Elevated levels of base metals, including copper, were encountered in several holes.

 

The geologic setting and the style of mineralization at Kaaresselkä resembles several recent and past discoveries such as Helmi (Aurion-B2Gold JV) and Ikkari (Rupert Resources) as well as the past producing Saattopora mine.

 

 

Vanha and Kaares Scout Drilling Summary
Hole ID EOH (m) Azimuth Dip From (m) To (m) Width (m) Au (g/t) Target Area
KS24073 229.20 148.0 -39.8 NSV Kaares
KS24074 217.40 147.9 -38.9 72.00 72.65 0.65 0.48 Kaares
KS24075 250.40 305.2 -39.6 NSV Kaares
KS24076 152.20 178.5 -50.0 99.30 115.90 16.60 1.00 Vanha
including 103.40 111.10 7.70 1.78
and 129.55 130.60 1.05 0.58
KS24077 287.40 228.5 -60.4 73.20 74.30 1.10 3.61 Vanha
and 187.05 188.65 1.60 1.36
and 236.65 239.65 3.00 0.59
and 252.00 258.25 6.25 0.27
KS24078 317.60 230.5 -60.3 212.05 213.10 1.05 0.45 Vanha
and 240.80 244.60 3.80 0.35
and 249.60 252.90 3.30 0.53
KS24079 278.00 210.0 -46.7 20.10 23.20 3.10 29.10 Vanha
and 237.80 238.60 0.80 2.80
and 259.75 269.60 9.85 3.35
including 268.00 269.60 1.60 18.15
KS24080 151.10 175.0 -40.2 60.40 61.90 1.50 0.68 Vanha
and 64.90 70.55 5.65 3.92
including 66.40 67.90 1.50 12.50
and 79.80 90.15 10.35 0.51
and 104.10 105.60 1.50 1.13
and 126.15 127.10 0.95 0.50
KS24081 151.10 175.5 -40.4 22.45 29.10 6.65 0.52 Vanha
and 85.30 94.30 9.00 2.77
including 87.30 88.20 0.90 20.40
and 114.05 118.10 4.05 2.32
including 117.05 118.10 1.05 8.19

 

All widths are core widths.  True width is not known at this time. All assay values are uncut.
NSV = no significant values, EOH = end of hole

 

Drill hole descriptions

 

Scout hole KS24073 is located 1.3 km west of the Vanha area. The hole was drilled to the southeast and targeted geophysical features along the interpreted domain boundary. KS24073 did not intersect elevated gold (≥0.1 g/t) values.

 

Scout hole KS24074 is located 1.4 km west of the Vanha area and was collared on section 115 m northwest of KS24073. The hole was drilled to the southeast and targeted geophysical features along the interpreted domain boundary. KS24074 intersected several elevated gold (≥0.1 g/t) values including 0.48 g/t Au over 0.65 m from 72.00 m in a visible gold bearing quartz vein near the interpreted domain boundary.

 

Scout hole KS24075 is located 1.4 km southwest of the Vanha area. The hole was drilled to the northwest and targeted geophysical features. KS24075 did not intersect elevated gold (≥0.1 g/t) values.

 

Drill hole KS24076 is located in the eastern Vanha area and was collared 52 m north of KS23071.  KS24076 intersected a mineralized interval of 1.00 g/t Au over 16.60 m from 99.30 m including 1.78 g/t Au over 7.70 m from 103.40 m. Other samples with elevated gold (≥0.1 g/t) were also intersected.

 

Drill hole KS24077 is located in the western Vanha area and was collared 40 m northeast of KS23035. KS24077 intersected several mineralized intervals such as 3.61 g/t Au over 1.10 m from 73.20 m and 1.36 g/t Au over 1.60 m from 187.05 m. Other samples with elevated gold (≥0.1 g/t) were also encountered.

 

Drill hole KS24078 is located in the western Vanha area and was collared 44 m northeast of KS23039. KS24078 intersected several mineralized intervals such as 0.45 g/t Au over 1.05 m from 212.05 m and 0.53 g/t Au over 3.30 m from 249.60 m. Other samples with elevated gold (≥0.1 g/t) were also encountered.

 

Drill hole KS24079 is located in the western Vanha area and was collared 43 m northeast of KS23070. KS24079 intersected several mineralized intervals such as 29.10 g/t Au over 3.10 m from 20.10 m, 2.80 g/t Au over 0.80 m from 237.80 m and 3.35 g/t Au over 9.85 m from 259.75 m including 18.15 g/t Au over 1.60 m from 268.00 m. Other samples with elevated gold (≥0.1 g/t) were also encountered. The intercept of 29.10 g/t Au over 3.10 m from 20.10 m is located approximately 100 m north of the Vanha Main trend. The intercept of 3.35 g/t Au over 9.85 m from 259.75 m is interpreted to extend the mineralized system 50 m deeper in the western part of the Vanha Main trend.

 

Drill hole KS24080 is located in the western Vanha area and targeted the interpreted domain boundary. KS24080 intersected numerous mineralized intervals such as 3.92 g/t Au over 5.65 m from 64.90 m including 12.50 g/t Au over 1.50 m from 66.40 m and 0.51 g/t Au over 10.35 m from 79.80 m. Other samples with elevated gold (≥0.1 g/t) were also encountered. The intercepts are located approximately 100 m west of previous intercepts at Vanha.

 

Drill hole KS24081 is located in the western Vanha area, was collared on section 69 m south of KS24080, and targeted the interpreted domain boundary. KS24081 intersected numerous mineralized intervals such as 0.52 g/t Au over 6.65 m from 22.45 m, 2.77 g/t Au over 9.00 m from 85.30 m including 20.40 g/t Au over 0.90 m from 87.30 m and 2.32 g/t Au over 4.05 m from 114.05 m including 8.19 g/t Au over 1.05 m from 117.05 m. Other samples with elevated gold (≥0.1 g/t) were also encountered. The intercepts are located approximately 100 m west of previous intercepts at Vanha.

 

Quality Assurance and Quality Control

 

All drill core samples were delivered to the ALS preparation facility in Sodankylä, Finland where sample preparation work was completed. All analytical work was completed at ALS facilities in Loughrea, Ireland and Rosia Montana, Romania. ALS is an internationally accredited lab and is ISO compliant (ISO 9001:2008, ISO/IEC 17025:2005). Samples were analyzed for gold using either the Au-AA26 procedure (50 g fire assay with AAS finish: Lower Detection Limit (“LDL”) 0.01 g/t gold; Upper Detection Limit (“UDL”) 100 g/t gold) or they were analyzed for gold, platinum and palladium using the PGM-ICP24 procedure (50 g fire assay with ICP-AES finish: LDL 0.001 g/t gold, 0.005 g/t platinum, 0.001 g/t palladium; UDL 10 g/t gold, 10 g/t platinum, 10 g/t palladium) or the PGM-ICP23 procedure (30 g fire assay with ICP-AES finish: LDL 0.001 g/t gold, 0.005 g/t platinum, 0.001 g/t palladium; UDL 10 g/t gold, 10 g/t platinum, 10 g/t palladium). Select samples were analyzed by Au-SCR24 1kg, Screen Fire Assay Au (0.05-1,000 ppm) by 1kg screen fire assay (50 g nominal sample weight). The sample pulp (1kg) is passed through a 100-micron stainless steel screen. Any material remaining on the screen (>100 micron) is retained and analyzed in its entirety by fire assay with gravimetric finish and reported as the Au (+) fraction. The material passing through the screen (100 micron) is homogenized and two sub-samples are analyzed by fire assay with AAS finish. The average of the two AAS results is taken and reported as the Au (-) fraction result. All three values are used in calculating the combined gold content of the plus and minus fractions. The gold values for both the (+) 100 and (-) 100 micron fractions are reported together with the weight of each fraction as well as the calculated total gold content of the sample. Multi-element analysis (ME-ICP61, four-acid digestion, 35 element ICP-AES) was completed on all samples. Certified standards and blanks were inserted every 10 samples. ALS has its own QA/QC protocol using standards, blanks and duplicates.

 

This news release has been reviewed by Andrew Hussey, P.Geo., GIS Geologist and Database Manager for Aurion Resources, a Qualified Person as defined by National Instrument 43-101.

 

About Aurion Resources Ltd.

 

Aurion Resources Ltd. (is a well-funded, Canadian exploration company listed on the TSX Venture Exchange and the OTCQX Best Market. Aurion’s strategy is to generate or acquire early-stage precious metals exploration opportunities and advance them through direct exploration by our experienced team or by business partnerships and joint venture arrangements. Aurion’s current focus is exploring on its Risti project, as well as advancing its joint venture properties with B2Gold Corp. and Kinross Gold in Finland.

 

Posted September 9, 2024

Share this news article

MORE or "UNCATEGORIZED"


Millennial Announces Closing Private Placement for Total Proceeds of $9,188,880

Millennial Potash Corp. (TSX-V: MLP) (OTCQB: MLPNF) (FSE: X0D) is... READ MORE

July 31, 2025

Laramide Resources Announces Closing of Upsized $12,000,000 Private Placement

Laramide Resources Ltd. (TSX: LAM) (ASX: LAM) (OTCQX: LMRXF)  a ... READ MORE

July 31, 2025

SPC Nickel Closes $3.5 Million Rights Offering Backstopped by Dundee Corporation

SPC Nickel Corp. (TSX-V: SPC) and Dundee Corporation (TSX: DC.A) are pl... READ MORE

July 31, 2025

St. Augustine Announces Positive Results of the Kingking Copper-Gold Project Updated Preliminary Feasibility Study

NPV7% of $4.18 Billion After-tax IRR of 34.2% at $4.30/lb Copper ... READ MORE

July 31, 2025

Independence Gold Intersects 52.46 Metres Grading 2.51 g/t Gold and 19.73 g/t Silver in the Johnny Vein at the 3Ts Project, BC Independence Gold Corp. (TSX-V: IGO) is pleased to report assay results from three additional diamond drill holes completed at the Johnny Vein System at the 3Ts Project located in central British Columbia. These results further confirm the continuity and high-grade nature of the Johnny Vein System and expands the known footprint of mineralization. Located approximately 185 kilometres southwest of Prince George, British Columbia, the 3Ts Project comprises thirty-one mineral claims covering approximately 35,486 hectares in the Nechako Plateau region. The project lies 16 km southwest of Artemis Gold Inc.'s Blackwater Mine and hosts a low-sulphidation epithermal quartz-carbonate vein district within which at least nineteen known mineralized veins, ranging from 50 to over 1,100 metres in strike length and true widths of up to 32 m have been identified. Highlights from diamond drilling include: • Hole 3TS-25-31 intersected a broad zone of mineralization grading 2.51 g/t gold and 19.73 g/t silver over 52.46 metres (true width approximately 32m), including: o 2.32m grading 9.83 g/t gold and 28.02 g/t silver o 2.90m grading 7.16 g/t gold and 63.10 g/t silver o 1.14m grading 18.46 g/t gold and 33.33 g/t silver • Hole 3TS-25-29 returned 7.94 metres grading 2.65 g/t gold and 10.71 g/t silver (true width approximately 7.46m), including 1.94 metres of 7.53 g/t gold and 32.47 g/t silver. • Hole 3TS-25-30 returned 5.90 metres of 1.86 g/t gold and 17.29 g/t silver (true width approximately 5.54m), including 0.72 metres of 4.00 g/t gold and 26.39 g/t silver. "These results further validate the Johnny Vein System as a high-grade, laterally extensive target with strong potential for resource expansion," stated Randy Turner, President & CEO of Independence Gold. "We are particularly excited by the width and grade intersected in hole 3TS-25-31, which demonstrates consistent mineralization over more than 30 metres of true width and includes multiple zones of exceptional gold and silver values." The Johnny Vein System is one of several epithermal quartz-carbonate veins being explored at the 3Ts Project and appears to be comprised of several intertwining veins with mineralized breccias that produce wide zones of mineralization. The primary vein set is interpreted to have a true thickness of approximately 32 metres; however, including adjacent mineralized breccias and minor veins, the total mineralized width may extend up to 47.5 metres true width. The Johnny Vein indicates similarities in grade and continuity to the established Ted-Mint and Tommy Vein Systems, which form the foundation of the current 3Ts resource model (please see news release dated August 18th, 2022 for further details; "Technical Report on the Mineral Resource Estimate Update for the 3Ts Gold Project, Omineca Mining Division, British Columbia, Canada", authored by Armitage and Miller). The combined in-pit and underground components of Tommy and Ted-Mint vein systems contain a total inferred resource estimate of 4,469,297 tonnes grading 3.64 grams per tonne gold and 96.26 g/t silver, at a cut off grade of 0.4 g/t gold equivalent ("AuEq") in-pit and 2.0 g/t AuEq underground, containing 522,330 ounces of gold and 13,831,415 ounces of silver, totaling 678,156 AuEq ounces. Drill results from the Johnny Vein System will be incorporated in the updated NI 43-101 mineral resource anticipated to be completed in the third quarter of 2025. Drill Hole From (m) To (m) Interval (m) Gold (g/t) Silver (g/t) 3TS-25-29 4.00 6.00 2.00 1.15 9.50 and 10.00 11.80 1.80 0.61 3.89 and 20.92 21.66 0.74 2.85 9.46 and 25.66 27.53 1.87 4.09 20.32 and 33.00 38.00 5.00 1.22 2.40 and 44.06 52.00 7.94 2.65 10.71 including 44.06 46.00 1.94 7.53 32.47 3TS-25-29 63.17 63.68 0.51 1.10 13.73 and 66.00 66.70 0.70 1.71 28.57 and 71.00 74.00 3.00 0.75 15.33 and 80.68 86.58 5.90 1.86 17.29 and 88.00 91.00 3.00 0.80 2.00 and 102.70 104.88 2.18 2.03 4.13 3TS-25-31 65.05 66.50 1.45 4.68 5.52 and 67.69 68.10 0.41 6.24 4.88 and 73.54 126.00 52.46 2.51 19.73 including 79.18 81.50 2.32 9.83 28.02 and including 87.10 90.00 2.90 7.16 63.10 and including 109.36 110.50 1.14 18.46 33.33 and 155.00 156.54 1.54 1.82 5.84 Table 1: Significant Intercepts from the Johnny Vein *The true widths of the veins are average 80-95% of the reported interval width QA/QC Protocols Samples consist of saw-cut (NQ) drill core with one-half retained for reference and one-half submitted for analysis. Samples were submitted in sealed plastic bags delivered to Bandstra Transportation for shipping to SGS Natural Resources Canada (SGS) labs in Burnaby, British Columbia, for sample preparation and analysis. Robotic sample preparation is used to ensure reproducibility and samples are pulverized to greater than 85% passing 75 microns. All samples are submitted for four acid digest with an ICP finish. Gold grades are obtained by fire assay with AAS finish. Samples which return greater than 10 parts per million gold and 100 parts per million silver are resubmitted for fire assay with a gravimetric finish. Sample batches consist of core samples, control standards, blanks and duplicates. Blanks and control standards (QAQC) are inserted into each batch of samples, with one QAQC per 20 samples. QAQC samples that return values 10% outside of the expected range require samples from that internal batch to be rerun by the lab. SGS laboratories operate under a Quality Management System that complies with ISO/IEC 17025. SGS's minerals laboratory in Burnaby is accredited by the Standards Council of Canada (SCC) for specific mineral tests listed on the scope of accreditation to the ISO/IEC 17025 standard. Please see SGS Analytical Methods for further details regarding analytical procedures. About Independence Independence Gold Corp. is a well-financed mineral exploration company with holdings ranging from early-stage grassroots exploration to advanced-stage resource expansion in British Columbia and Yukon. The Company is positioned to add shareholder value through systematic project advancement, while management continues to evaluate additional gold and silver projects for possible acquisition. For additional information, visit the Company's website www.ingold.ca. Andy Randell, P.Geo., the Company's Qualified Person as defined by National Instrument 43-101 and who is an independent consultant for the Company, has reviewed the technical information in this news release. Drill Hole Information from this release Drill Hole Easting Northing Elevation Azimuth* Dip Total Meterage 3TS-25-29 363045 5876905 1218 170 70 144 3TS-25-30 363067 5876940 1216 270 70 106 3TS-25-31 363067 5876940 1216 220 65 158 * All drill hole locations are in NAD83, Zone 10 Datum **Based on true north. For magnetic declination add 17.5 degrees

Independence Gold Corp. (TSX-V: IGO) is pleased to report assay r... READ MORE

July 31, 2025

Copyright 2025 The Prospector News