Highlights:

• The Company has received results from drillholes 1274-24-301-305 and 339-341 highlighted by the following intervals:
  • #339 – 2.82% CuEq over 44.5 metres beginning at 146 metres depth
  • #340 – 3.35 % CuEq over 20.75 metres beginning at 126.3 metres depth
  • #341 – 3.24 % CuEq over 9.9 metres beginning at 156 metres depth
• Drillhole 1274-24-339 was designed to test the lateral extension of the high-grade lens identified in holes 1274-24-293 and 294, released on March 20, 2024. These holes intercepted 2.6% CuEq over 37.0 metres (#293), including 6.3% CuEq over 10.6 metres, and 2.5% CuEq over 61.3 metres (#294), including 11.4% CuEq over 10.6 metres.
• Drillhole 1274-24-339 intercepted mineralization approximately 20 metres east of 1274-24-294, intercepting 2.82% CuEq over 44.5 metres hosted in strong stringers observed from 83.0 to 189.5 metres, corresponding to a vertical depth starting about 20 metres below the bedrock contact. The potential to define more of this high-grade lens remains open.
• The Company remains well funded, with $18.0 million to complete the remaining 16,500 metres planned for the 2024 work program and an additional 20,000 metres in 2025, which will be incorporated into a Preliminary Economic Assessment to complete the B26 option.

Abitibi Metals Corp. (CSE: AMQ) (OTCQB: AMQFF) (FSE: FW0) is pleased to announce results from the 13,500-metre maiden drill program at the B26 Polymetallic Deposit completed under the first phase of a fully funded 30,000-metre 2024 field season. Abitibi Metals is fully funded with $18.0 million to complete the remaining 16,500 metres planned for the 2024 work program, as well as an additional 20,000 metres in 2025, which will be incorporated into a Preliminary Economic Assessment to complete the option. On November 16th, 2023, the Company entered into an option agreement on the B26 Deposit to earn 80% over 7 years from SOQUEM Inc (see news release dated November 16, 2023).

Jonathon Deluce, CEO of Abitibi Metals, commented, “The drilling at B26 continues to deliver exceptional results as seen in #339, which intercepted 2.82% CuEq over 44.5 metres, extending the high-grade lens outlined in #294 laterally, 20 metres to the east. This hole continues to add to the goal of better defining the high-grade lens while also outlining the lower-grade near-surface halo, supporting our bulk-tonnage open pit target. We will utilize the successful drilling at 293 – 294 and 339 – 341 to further target this and other high-grade lenses within and outside the main deposit. With the copper price breaking out, projects like B26, located in the world-class jurisdiction of Quebec, stand out globally for their potential to deliver critical metals at a time when there is a clear rising need for copper.”

Mr. Deluce continued: “We are in an excellent position for the coming months, with $18 million in our treasury. This funding will support the 16,500 meters of drilling planned at B26, as well as an additional 20,000 meters in 2025. We expect to continue to have plenty of news in the coming weeks as we remain one of the most active junior companies in the mineral rich Abitibi greenstone belt.”

B26 Main Deposit

The B26 Main Deposit has a continuous strike length of 1.0 km, and mineralization has historically been drilled to 0.85km in vertical depth with limited drill coverage.

Drillhole 1274-24-339, which intercepted 2.82% CuEq over 44.5 metres, was advanced to test the immediate extension 20 metres east of the high-grade lens identified in #293 and #294. Copper mineralization concentrated in separate bands varying in thickness from 0.4 to nearly 4 metres, with chalcopyrite volume evaluated between 10% and 60%, was intercepted, forming a 106.5-metre-long interval of mineralization observed from 83 to 189.5 metres.

Drillhole 1274-24-340, which intercepted 3.35% CuEq over 20.75 metres, was planned to test the western strike extent of the high-grade lens identified in #293 and #294 at a spacing of 20 metres. However, unexpected drilling deviation resulted in the hole ending up in close range with 1274-24-294.

Drillhole 1274-24-341, which intercepted 3.25% CuEq over 9.90 metres, was drilled with a northeast azimuth and intersected the high-grade lens 25 metres east of the 1274-24-294 section.

Drill holes 1274-24-302, 1274-24-303, and 1274-24-304 were drilled 100 metres apart to test the up-dip extension of the copper-gold stringer system close to its known footwall contact. Short low-grade intersections, including 0.59 g/t over 3.2 metres in #304, represent the northern margin of the copper zone, which is about 100 metres northward from the southern contact.

Table 1: Significant Intercepts

The core logging program is run by Explo-Logik in Val d’Or, Quebec. The drill core was split with half sent to AGAT Laboratories Ltd. and prepared in Val d’Or, Quebec. All samples are processed by fire assays on 50 gr with atomic absorption finish and by “four acids digestion” with ICP-OES finish respectively for gold and base metals. Samples returning a gold grade above 3 g/t are reprocessed by metallic screening with a cut at 106 µm. Material treated is split and assayed by fire assay with ICP-OES finish to extinction. A separate split is taken to assay separately mineralized intervals with target grades above 0.5% Cu using Na2O2 fusion and ICP-OES or ICP-MS finish.

Samples preparation duplicates, varied standards, and blanks are inserted into the sample stream.

In the 2018 resource estimate, SGS recommended the QAQC protocol to explain the replicability for the four metals (Au-Cu-Ag-Zn). The Company has set up for this program a series of assaying protocols with the objective to control QAQC issues from the beginning of the project. As a result, samples are crushed finer with 95% of particles passing 1.7 mm and a large split of 1 kg is pulverized down to 106 µm (150 mesh). Other measures put in place include the automatic re-assaying of gold results above 3 g/t by metallic screening and the use of sodium peroxide fusion in mineralized intervals interval corresponding to a target grade above 0.5% Cu.

Qualified Person

Information contained in this press release was reviewed and approved by Martin Demers, P.Geo., OGQ No. 770, a qualified person as defined under National Instrument 43-101, and responsible for the technical information provided in this news release.

About Abitibi Metals Corp:

Abitibi Metals Corp. is a Quebec-focused mineral acquisition and exploration company focused on the development of quality base and precious metal properties that are drill-ready with high-upside and expansion potential. Abitibi’s portfolio of strategic properties provides target-rich diversification and includes the option to earn 80% of the high-grade B26 Polymetallic Deposit, which hosts a historical resource estimate¹ of 7.0MT @ 2.94% Cu Eq (Ind) & 4.4MT @ 2.97% Cu Eq (Inf), and the Beschefer Gold Project, where historical drilling has identified 4 historical intercepts with a metal factor of over 100 g/t gold highlighted by 55.63 g/t gold over 5.57 metres and 13.07 g/t gold over 8.75 metres amongst four modelled zones.

About SOQUEM:

SOQUEM, a subsidiary of Investissement Québec, is dedicated to promoting the exploration, discovery and development of mining properties in Quebec. SOQUEM also contributes to maintaining strong local economies. Proud partner and ambassador for the development of Quebec’s mineral wealth, SOQUEM relies on innovation, research and strategic minerals to be well-positioned for the future.