
VIOR GOLD CORPORATION INC. (TSX-V: VIO) (OTCQB: VIORF) (FRA: VL5) is pleased to report additional results from its 20,000-metre ongoing drill program on its 100%-owned Ligneris Project located 55 kilometers northwest of the town of Amos, Abitibi region, Quebec.
Drillhole LI-26-010-EXT, drilled 50 meters southeast of drillhole LI-26-005-EXT (5.64 g/t Au over 4.0 meters; see news release dated March 17, 2026) intersected 5.45 g/t Au over 3.0 meters including 14.8 g/t Au over 1.0 meters. This interval confirms high-grade gold mineralization continuity below 650 meters vertically. It is hosted in a strongly altered rhyolite characterized primarily by sericite and local patchy to pervasive silica with traces to 2% pyrite. Moreover, drillhole LI-26-010-EXT intersected a broad interval of low-grade gold mineralization that returned 0.79 g/t Au over 40.3 meters including 1.19 g/t Au over 15.0 meters at 580 meters vertical depth.
Drillhole LI-26-012 collared 430 meters northeast of hole LI-26-002 (35.2 g/t Au over 3.0 meters; see news release dated March 17, 2026) returned values of 12.8 g/t Au over 2.0 meters including 22.3 g/t Au over 0.5 meters. Mineralization occurs as finely disseminated pyrite, ranging from trace to 5% in strongly silicified bands of centimetric to decametric scale hosted in a strongly sericitized rhyolite. Drillholes LI-26-014 and LI-26-007 intersected 38.3 g/t Au over 1.0 meters and 21.7 g/t Au over 1.0 meters respectively. These two holes are located on the southwestern extension of the South Zone mineralized structure. Hole LI-26-007 seems to correlate with the intercep t in hole LI-26-006 that was previously released on March 17, 2026, that returned 1.10 g/t Au over 24.2 meters. Processing of the whole-rock geochemistry has demonstrated the continuity of the alteration trend towards west, and these new results confirm the fertility of the area.
Mathieu Savard, President and Chief Executive Officer of Vior Gold Corporation, commented “With today’s results, we demonstrate the continuity of the South Zone mineralized structure which has now been identified over more than 650 meters laterally and 650 meters vertically. Moreover, broader low grade mineralized intervals continue to be intersected which are indicative of a larger gold system. A closer look at the high-grade intercepts previously published on March 17, 2026 have exhibited visible gold in two of the best intervals characterized by the presence of silica and black chlorite usually found in proximity of VMS system. We are very encouraged by these recent results th at, in our view, warrant additional drilling to continue assessing that large gold system.”
Since the beginning of drilling program, the Corporation has completed approximately 17,000 meters of drilling on Ligneris. A total of 5,725 assays were received and 9,920 are currently pending at the laboratory. Vior is currently drilling with two (2) drill rigs at Ligneris and should complete the first phase of drilling later this spring. Simultaneously, the Corporation is preparing its first drilling campaign on the recently acquired Kinebik Project, expected to start early this summer.
Table 1 – Drill Core Assay Results
| Drill hole Number | Interval From (m) |
Interval To (m) |
Interval Width (m) |
Au (g/t) uncut |
Zone |
| LI-26-002 | 100.0 | 103.0 | 3.0 | 2.62 | South Zone |
| including | 101.5 | 103.0 | 1.5 | 4.08 | |
| LI-26-003 | 452.7 | 467.0 | 14.3 | 0.71 | South Zone |
| including | 452.7 | 454.0 | 1.3 | 3.32 | |
| and | 461.4 | 462.7 | 1.3 | 2.96 | |
| LI-26-004 | 314.5 | 317.0 | 2.5 | 3.42 | South Zone |
| including | 315.5 | 317.0 | 1.5 | 4.62 | |
| LI-26-005-EXT | 487.0 | 495.5 | 8.5 | 1.62 | South Zone |
| including | 489.0 | 490.0< /td> | 1.0 | 5.01 | |
| and | 494.5 | 495.5 | 1.0 | 5.02 | |
| LI-26-005-EXT | 706.0 | 707.0 | 1.0 | 11.5 | South Zone |
| LI-26-007 | 373.0 | 374.0 | 1.0 | 21.7 | South Zone |
| LI-26-007 | 527.0 | 532.0 | 5.0 | 1.04 | South Zone |
| LI-26-010-EXT | 666.0 | 706.3 | 40.3 | 0.79 | South Zone |
| including | 671.0 | 686.0 | 15.0 | 1.19 | |
| and | 694.8 | 699.0 | 4.2 | 1.28 | |
| LI-26-010-EXT | 765.0 | 768.0 | 3.0 | 5.45 | South Zone |
| including | 766.0 | 767.0 | 1.0 | 14.8 | |
| LI-26-012 | 202.0 | 204.0 | 2.0 | 12.8 | South Zone |
| including | 202.0 | 202.5 | 0.5 | 22.3 | |
| LI-26-014 | 276.9 | 277.9 | 1.0 | 38.3 | South Zone |
Table 2 – Drill Hole Collar Locations
| Drill hole Number | Azimuth (°) | Dip (°) | Drill Hole Length (m) |
UTM Easting |
UTM Northing |
| LI-26-002 | 330 | -45 | 471 | 684773 | 5429577 |
| LI-26-003 | 333 | -54 | 559 | 684821 | 5429470 |
| LI-26-004 | 335 | -50 | 358 | 684869 | 5429643 |
| LI-26-005-EXT | 330 | -61 | 1015 | 684821 | 5429470 |
| LI-26-007 | 335 | -49 | 550 | 684658 | 5429359 |
| LI-26-010-EXT | 318 | -60 | 1004 | 684950 | 5429448 |
| LI-26-012 | 338 | -47 | 406 | 685161 | 5429767 |
| LI-26-014 | 335 | -50 | 359 | 684661 | 5429526 |
Quality Control
True widths are estimated at 65-80% of the reported core length intervals. Assays are uncut except where indicated. All NQ core assays reported were obtained by either 1-kg screen fire assay or standard 50 gram fire-assaying-AA finish or gravimetric finish at ALS Laboratories in Val d’Or, Québec or Sudbury, Ontario. The 1-kg screen assay method is used when samples contain coarse gold intervals. Selected samples are also analyzed for multi-elements using a Four Acid Digestion-ICP-MS method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control, a nd interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are alternately inserted every 10 samples to adhere to strict QA/QC guidelines and protocols by the Corporation and the lab. Historical results on the Ligneris Project described in this news release are from public sources and the Qualified Person responsible for the review and approval of the technical information disclosed in this news release (see details below) has not verified the information relating to these historical results. Consequently, such information is not necessarily indicative of mineralization on the Ligneris Project.
Qualified Person
The technical content disclosed in this news release was reviewed and approved by Pascal Simard, Vice-President Exploration at Vior Gold Corporation, Qualified Person as per NI 43-101.
About Vior Gold Corporation Inc.
Vior Gold Corporation is a junior mineral exploration corporation based in the province of Quebec, Canada, whose corporate strategy is to generate, explore, and develop high-quality precious metals projects in the proven and favorable mining jurisdiction of Quebec. Through the years, the Corporation’s management and technical teams have demonstrated their ability to discover several multi million ounces gold deposits in Quebec.
Gravity-Finish Re-Assay Confirms High-Grade Gold Mineralization a... READ MORE
American Pacific Mining Corp. (CSE: USGD) (OTCQX: USGDF) (... READ MORE
Saw-cut sampling returned 20.2 g/t gold over 5.0 meters at surfac... READ MORE
McEwen Inc. (NYSE:MUX) (TSX: MUX) announced its first quarter fin... READ MORE