The Prospector News

West Red Lake Gold Defines New High-Grade Shoot at Upper 8 Target – Madsen Property

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

West Red Lake Gold Defines New High-Grade Shoot at Upper 8 Target – Madsen Property

 

West Red Lake Gold Mines Ltd. (TSX-V: WRLG) (OTCQB: WRLGF) is pleased to report additional drill results from the Upper 8 Target at its 100% owned Madsen Property located in the Red Lake Gold District of Northwestern Ontario, Canada.

These results follow-up on the significant Upper 8 intercepts previously announced on October 2, 2024, where drilling returned 44.17 g/t Au over 1.3 meters and 20.63 g/t Au over 0.5m.

UPPER 8 HIGHLIGHTS:

  • Hole WRL24-017 Intersected 1.5m @ 21.44 g/t Au, from 297.7m to 299.2m, Including 0.5m @ 52.17 g/t Au, from 298.2m to 298.7m – this high-grade 0.5m interval is complimented by approximately 30 specks of visible gold (Figure 1).
  • Hole WRL24-021 Intersected 2m @ 7.41 g/t Au, from 340.25m to 342.25m, Including 0.5m @ 23.74 g/t Au, from 340.25m to 340.75m.
  • WRLG has now successfully defined a new ore shoot at Upper 8 that is approximately 30m wide and 130m along plunge – this new zone of mineralization remains open at depth (Figure 4).
  • The plunge line on the Upper 8 ore shoot has been constrained to an orientation at approximately 110°/-40° (azimuth/plunge), which is very similar to the orientation of the deeper 8 Zone deposit – this increases WRLG’s confidence in the potential to grow Upper 8 down plunge with additional drilling.

Shane Williams, President and CEO, stated, “The initial results we received from Upper 8 were very encouraging and motivated our team to add a second drill to focus solely on this new high-grade area. Upper 8 was already a shallow geologic analog to the deeper 8 Zone, but with the exceptional grades and visible gold showings we’re now encountering this target is becoming truly reminiscent of the high-grade gold mineralization Red Lake is known for. It’s still early days, but we believe the Upper 8 target has the potential to become the next new significant discovery in the Red Lake gold camp and supports the likelihood for the presence of more high-grade deposits like 8-Zone yet to be discovered across the Madsen property.”

Figure 1. Visible gold showings within 0.5m (core length) zone of blue-grey quartz veining (VBGQ) grading 52.17 g/t Au. Overall VBGQ zone is 1.8m core length. Note the spatial association between the high-grade interval and the Russet Lake Mafic Intrusive (RSMI). PRBA denotes “Biotite-Altered Peridotite” and is the signature 8-Zone-style gold bearing alteration package within the Russet Lake Ultramafic. Diamond drill core in this photo is NQ diameter (47.6 millimeters).

The drill results featured in this news release are focused on the Upper 8 target, which is a shallower geologic analog to the well known high-grade 8-Zone. The Upper 8 target is hosted within the same lithologic unit (Russet Lake Ultramafic) approximately 750m up-plunge from the main 8-Zone deposit (Figure 3). Its location in ultramafic rocks, its style of mineralization, and its exceptionally high grades make the 8 Zone geologically unique from the main Madsen deposit. The 8 Zone currently contains an Indicated mineral resource of 87,700 ounces grading 18 grams per tonne gold, with an additional Inferred resource of 18,200 oz grading 14.6 g/t Au.

Plan maps and sections for the Upper 8 drilling outlined in this release are provided in Figures 2 through 7.

TABLE 1. Significant intercepts (>1 g/t Au) from drilling at Upper 8 Target.

Hole ID Target From (m) To (m) Length (m)* Au (g/t)
WRL24-010 Upper 8 217.90 222.00 4.10 1.25
WRL24-011 Upper 8 281.20 282.00 0.80 8.03
AND Upper 8 286.50 287.85 1.35 1.20
WRL24-012 Upper 8 269.20 270.20 1.00 1.40
WRL24-013 Upper 8 No Assays > 1 g/t Au
WRL24-014 Upper 8 254.50 255.00 0.50 1.87
AND Upper 8 269.85 272.45 2.60 3.01
Incl. 270.45 270.95 0.50 8.62
AND Upper 8 283.50 284.00 0.50 1.53
WRL24-016 Upper 8 292.50 293.00 0.50 1.22
WRL24-017 Upper 8 274.90 277.90 3.00 1.17
AND Upper 8 287.00 287.50 0.50 4.90
AND Upper 8 291.20 294.70 3.50 1.82
AND Upper 8 297.70 299.20 1.50 21.44
Incl. 298.20 298.70 0.50 52.17
AND Upper 8 302.20 302.70 0.50 1.46
WRL24-021 Upper 8 335.70 336.25 0.55 1.40
Incl. 335.75 336.25 0.50 4.27
AND Upper 8 340.25 342.25 2.00 7.41
Incl. 340.25 340.75 0.50 23.74
AND Upper 8 342.75 343.25 0.50 1.50
AND Upper 8 344.25 346.25 2.00 3.24
Incl. 345.75 346.25 0.50 8.27

*The “From-To” intervals in Table 1 are denoting overall downhole length of the intercept. True thickness has not been calculated for these intercepts but is expected to be ≥ 70% of downhole thickness based on intercept angles observed in the drill core. Internal dilution for composite intervals does not exceed 1m for samples grading <0.1 g/t Au.

TABLE 2: Drill collar summary for holes reported in this News Release.

Hole ID Target Easting Northing Elev (m) Length (m) Azimuth Dip
WRL24-010 Upper 8 434836 5646692 397 335.8 254 -49
WRL24-011 Upper 8 434836 5646692 396 350.5 265 -67
WRL24-012 Upper 8 434836 5646692 396 347.6 235 -53
WRL24-013 Upper 8 434835 5646692 396 329.5 260 -54
WRL24-014 Upper 8 434835 5646692 396 320.5 264 -50
WRL24-016 Upper 8 434835 5646692 396 314.5 268 -45
WRL24-017 Upper 8 434835 5646692 396 345.0 254 -67
WRL24-021 Upper 9 434935 5646683 406 406.4 261 -57


DISCUSSION:

Drilling on the Upper 8 target is designed to test the projected, near-surface extension of the mineralized shear corridor that hosts the highly prospective 8-Zone. The Upper 8 target horizon was intercepted in only a few historic drill holes, which encountered a zone of strong shearing, alteration and quartz veining equivalent to 8-Zone style mineralization.

The Upper 8 shear domain is hosted within the Russet Lake Ultramafic, which also hosts the 8-Zone deposit, and the angle of shear emplacement of Upper 8 is sympathetic to the structural orientation observed at 8-Zone. Recognition that the gold mineralization at the Upper 8 target is comprised of transposed quartz veinlets within a definable and recognizable shear corridor provides excellent opportunity for additional drilling and expansion potential.

Recent drilling on the Upper 8 target by WRLG has shown that gold mineralization is similar in geological setting and style as the deeper 8-Zone deposit. Elevated gold at Upper 8 is shown to occur within deformed and recrystalized blue-grey quartz and quartz-sulphide veinlets. These veinlets are hosted within shear domains, which are easily recognizable by their locally intense deformation fabrics, and the presence of silica, biotite, potassium feldspar, and amphibole alteration.

A spatial association with mafic intrusives (Russet Lake Mafic Intrusives, or “RSMI”) has also been recognized, which is interpreted as being a more mafic equivalent to the spatial association seen at Madsen between mineralized domains and quartz-porphyry (“QZPY”) dikes. At Upper 8, the high-grade vein zones tend to be positioned footwall to the RSMI units. This spatial relationship between gold mineralization and syn-contemporaneous intrusives has been well documented at other significant deposits in the Red Lake district (Eg. Madsen, Rowan, F2/Bateman, etc).

High resolution versions of all the figures contained in this press release can be found at the following web address: https://westredlakegold.com/upper-8-news-release-maps/

FIGURE 2. Regional Targeting Map for 2024 Surface Drilling Program at Madsen.

FIGURE 3. Sectional View of Upper 8 Target relative to 8-Zone and Madsen deposits.[1] Note the similarity in orientation of the Upper 8 shear boundary relative to orientation on the 8-Zone – suggests potential for sub-parallel structures between 8-Zone and Upper 8.

[1] Mineral resources are estimated at a cut-off grade of 3.38 g/t Au and a gold price of US1,800/oz. Please refer to the technical report entitled “Independent NI 43-101 Technical Report and Updated Mineral Resource Estimate for the PureGold Mine, Canada”, prepared by SRK Consulting (Canada) Inc. and dated June 16, 2023, and amended April 24, 2024. A full copy of the SRK report is available on the Company’s website and on SEDAR+ at www.sedarplus.ca.

FIGURE 4. Upper 8 Target plan view showing size, extent and orientation of currently defined high grade shoot. Note the similar orientation of the Upper 8 ore shoot relative to 8 Zone.

FIGURE 5. Upper 8 Target section view showing assay highlights for Holes WRL24-011, -013, -014, -016, interpreted Upper 8 shear boundary and RSMI dikes.

Figure 6. Upper 8 Target section view showing assay highlights for Holes WRL24-010, -012, -017, interpreted Upper 8 shear boundary and RSMI dikes.

Figure 7. Upper 8 Target section view showing assay highlights for Hole WRL24-021, interpreted Upper 8 shear boundary and RSMI dikes.

Madsen Mine Pre-Feasibility Study Update

The Pre Feasibility Study for the Madsen Mine is nearing completion. The final phase of this study involves optimizing underground development and infrastructure sequencing and refining the associated operating and capital costs. West Red Lake Gold is working with SRK Consulting on these optimization opportunities, a process that is expected to take an additional few weeks to complete. As such the PFS is now targeted for release early in 2025.

Change of Year-End

The Company also announces that it has changed its fiscal year-end from November 30 to December 31.

QUALITY ASSURANCE/QUALITY CONTROL

Exploration drilling completed on surface at the Madsen Mine consists of oriented NQ-sized diamond drill core. All drill holes are systematically logged, photographed, and sampled by a trained geologist at the Madsen Mine core processing facility. Minimum allowable sample length is 0.5m. Maximum allowable sample length is 1.5m. Control samples (certified standards and uncertified blanks), along duplicates, are inserted at a target 5% insertion rate. Results are assessed for accuracy, precision, and contamination on an ongoing basis. The BQ-sized drill core is whole core sampled. The NQ-sized drill core is then cut lengthwise utilizing a diamond blade core saw along a line pre-selected by the geologist. To reduce sampling bias, the same side of drill core is sampled consistently utilizing the orientation line as reference. For those samples containing visible gold, a trained geologist supervises the cutting/bagging of those samples, and ensures the core saw blade is ‘cleaned’ with a dressing stone following the VG sample interval. Bagged samples are then sealed with zip ties and transported by Madsen Mine personnel directly to SGS Natural Resource’s Facility in Red Lake, Ontario for assay.

Samples are then prepped by SGS, which consists of drying at 105°C and crushing to 75% passing 2mm. A riffle splitter is then utilized to produce a 500g course reject for archive. The remainder of the sample is then pulverized to 85% passing 75 microns from which 50g is analyzed by fire assay and an atomic absorption spectroscopy (AAS) finish (SGS Code GO-FAA50V10). Samples returning gold values > 10 g/t Au are reanalyzed by fire assay with a gravimetric finish on a 50g sample (SGS Code GO_FAG50V). Samples with visible gold or returning gold values > 30 g/t Au are also analyzed via metallic screen analysis (SGS code: GO_FAS50M). For multi-element analysis, samples are sent to SGS’s facility in Burnaby, British Columbia and analyzed via four-acid digest with an atomic emission spectroscopy (ICP-AES) finish for 33-element analysis on 0.25g sample pulps (SGS code: GE_ICP40Q12). SGS Natural Resources analytical laboratories operates under a Quality Management System that complies with ISO/IEC 17025.

The Madsen Mine deposit presently hosts a National Instrument 43-101 – Standards of Disclosure for Mineral Projects Indicated resource of 1.65 million ounces of gold grading 7.4 g/t Au and an Inferred resource of 0.37 Moz of gold grading 6.3 g/t Au. Mineral resources are estimated at a cut-off grade of 3.38 g/t Au and a gold price of US1,800/oz. Mineral resources that are not mineral reserves do not have demonstrated economic viability. Please refer to the technical report entitled “Independent NI 43-101 Technical Report and Updated Mineral Resource Estimate for the PureGold Mine, Canada”, prepared by SRK Consulting (Canada) Inc. and dated June 16, 2023, and amended April 24, 2024 (the “Madsen Report”). The Madsen Resource Estimate has an effective date of December 31, 2021 and excludes depletion of mining activity during the period from January 1, 2022 to the mine closure on October 24, 2022 as it has been deemed immaterial and not relevant for the purpose of the Madsen Report. A full copy of the Madsen Report is available on the Company’s website and on SEDAR+ at www.sedarplus.ca.

The technical information presented in this news release has been reviewed and approved by Will Robinson, P.Geo., Vice President of Exploration for West Red Lake Gold and the Qualified Person for exploration at the West Red Lake Project, as defined by NI 43-101 “Standards of Disclosure for Mineral Projects”.

ABOUT WEST RED LAKE GOLD MINES

West Red Lake Gold Mines Ltd. is a mineral exploration company that is publicly traded and focused on advancing and developing its flagship Madsen Gold Mine and the associated 47 km2 highly prospective land package in the Red Lake district of Ontario. The highly productive Red Lake Gold District of Northwest Ontario, Canada has yielded over 30 million ounces of gold from high-grade zones and hosts some of the world’s richest gold deposits. WRLG also holds the wholly owned Rowan Property in Red Lake, with an expansive property position covering 31 km2 including three past producing gold mines – Rowan, Mount Jamie, and Red Summit.

Posted November 21, 2024

Share this news article

MORE or "UNCATEGORIZED"


Critical Metals Corp Achieves Breakthrough Tanbreez Heavy Rare Earth Results: >99% Dissolution of Eudialyte Concentrate Into 19 Ultra-High-Purity Rare Earth Products; Refinery Study Projects US$1.8–2.2b in Annual Refinery Revenue

Critical Metals Corp. (Nasdaq: CRML) a leading critical minerals ... READ MORE

September 16, 2026

Metalsource Mining Extends High Grade Mineralization at Depth as Silver Hill Exploration Enters Major Expansion Phase

Holes SH26-22 and SH26-23 return up to 930 g/t AgEq within broade... READ MORE

September 16, 2026

Pasinex Completes Sale of High-Grade Zinc Sulphide Material and Provides Pinargozu Operations Update

Pasinex Resources Limited (CSE: PSE) (FSE: PNX) a growing zinc-fo... READ MORE

September 16, 2026

Aya Gold & Silver Reports High-Grade Silver Exploration Results Near Pit and at Depth at Zgounder

Aya Gold & Silver Inc. (TSX: AYA; NASDAQ: AYA) is pleased to... READ MORE

September 16, 2026

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) has received results from the last four holes of a ten-hole, 1,996 metre summer drilling program in the Zavitz gold zone at the Company's 100% owned Moray gold project. In total, New Break has completed 5,372 metres of drilling in 32 drillholes in 2026. Moray is located 49 km southeast of Timmins, Ontario and 32 km northwest of the Young-Davidson gold mine operated by Alamos Gold Inc. Select results from the final four of ten holes drilled in the summer drilling program are presented below in Table 1, while drillhole collar locations are detailed in Table 2 in Appendix A. Table 1 – Moray Summer 2026 Final Drill Results Hole ID Length (m) From (m) To (m) Width (1) (m) Au Grade (2) (g/t) NBR-26-29 322.0 77.3 78.8 1.5 0.42 and 138.0 139.1 1.1 0.38 and 162.5 173.3 10.8 (3) 1.61 and 227.4 229.0 1.6 1.21 and 231.5 232.1 0.6 1.72 NBR-26-30 250.0 37.0 38.0 1.0 0.30 and 102.8 103.5 0.7 0.60 and 121.5 122.5 1.0 0.36 and 124.5 125.5 1.0 0.33 and 128.5 129.0 0.5 0.90 and 131.0 132.0 1.0 0.36 and 169.8 174.0 4.2 2.65 and 178.0 179.5 1.5 0.77 and 183.5 186.6 3.1 1.22 and 190.0 190.5 0.5 1.06 and 191.5 192.5 1.0 1.48 and 196.0 200.5 4.5 2.53 and 203.5 204.0 0.5 2.15 and 206.5 212.0 5.5 1.57 NBR-26-31 274.0 169.0 170.5 1.5 0.37 and 184.5 186.0 1.5 0.51 and 197.0 200.0 3.0 0.94 and 201.5 202.0 0.5 0.50 and 203.5 210.0 6.5 (3) 3.12 NBR-26-32 352.0 73.5 74.0 0.5 0.44 and 174.0 174.6 0.6 0.52 and 194.0 195.0 1.0 0.66 and 199.8 203.3 3.5 2.29 and 227.3 228.0 0.7 0.97 (1) Intervals are drill intersections and do not necessarily represent true widths. (2) All intervals are presented using a cut-off grade of 0.3 g/t Au and internal dilution of no more than 1.0 metres at grades less than 0.3 g/t Au and assays are not capped (see QA/QC Procedures). (3) Drill core photos shown in Appendix B. Figure 1 – Newly Reported Drillholes NBR-26-29, 30 Figure 2 – Newly Reported Drillholes NBR-26-30, 31, 32 Note: The bottom of NBR-26-30 deviated southeast and is represented in both sections. Figure 1: Section B-B1 incorporates drillholes NBR-26-06, 07, 08, 25, 26, 27, 28, 29 and part of 30. Gold mineralization extends southeast into the syenite as exhibited in NBR-26-29. NBR-26-30 is identified in both sections A-A1 and B-B1 as the drillhole was collared along section A-A1 but deviated southeast, intersecting gold mineralization in the mafic volcanics in section B-B1. Figure 2: A-A1 incorporates drillholes NBR-26-03, 04, 05, 23, 24, 30, 31 and 32. NBR-26-31 exhibits gold mineralization both within the syenite (at the contact) and within a "flow breccia" within the hematite altered mafic volcanic at the contact. NBR-26-32 is typified by blocky faulted ground with lamprophyre dykes and gold mineralization in the hematite altered mafic volcanics in a brecciated quartz vein with angular syenitic fragments. William Love, Chief Executive Officer of New Break commented, "Ongoing drilling this summer in the Zavitz gold zone continues to deliver significant gold values, with gold mineralization intercepted in every drillhole. As depicted in Figures 1 and 2, gold mineralization has been encountered predominantly within the mafic volcanics. Importantly, drillholes NR-26-29 and NR-26-32, the deepest drilled to date, demonstrate that gold mineralization extends into the syenite to the southeast at the contact with the mafic volcanics." He further noted, "The intrusive-mafic volcanic contact in the Zavitz gold zone has a distinctive magnetic high. This could be reflective of the higher proportion of iron in these mafic volcanics, which is associated with the higher gold values. This same magnetic and IP signature has been identified elsewhere in areas also believed to be along the intrusive-mafic volcanic contact. Drilling these never before tested targets with the goal of identifying gold mineralization similar to that encountered in the Zavitz zone represents the potential for significantly expanding the Moray gold discovery. There is also the belief that the Zavitz zone could represent the first of a series of stacked mineralized gold zones, which would point to the potential for a much larger gold system at depth. We plan to test this through deeper drilling directly into the Zavitz zone." About the Moray Gold Project The Moray property is located in the heart of the Ontario Abitibi greenstone belt, 49 km southeast of Timmins surrounded by a number of significant gold producing companies and existing mills (see Figure 3). The Young-Davidson gold mine operated by Alamos Gold Inc., with its 8,000 tonne per day mill is the closest and within a short trucking distance of approximately 45 km by road from Moray. The understanding of gold mineralization at Moray continues to evolve with each round of drilling. The occurrence of gold mineralization extending into the syenite to the southeast of the Zavitz zone and in the deepest drillholes is noteworthy given the presence of syenite-hosted mineralization at Young-Davidison. More recent examination of the drill core also suggests that the gold mineralization discovered to date may resemble an intrusion related style of deposit like Agnico Eagle's Upper Beaver gold deposit east of Kirkland Lake, as opposed to a structurally hosted gold system. Both Young-Davidson and Upper Beaver host multi-million ounce gold deposits. Figure 3 – Moray Location Map: Surrounding Gold Producers and Upper Beaver Gold Project Technical Content and Qualified Person The scientific and technical information contained in this news release has been reviewed and approved by Peter C. Hubacheck, P. Geo, consulting geologist to New Break, and an independent Qualified Person as defined by National Instrument 43-101. Mr. Hubacheck certifies that this news release fairly and accurately reflects the technical information and data presented. New Break conducts its exploration activities in accordance with CIM Best Practices Guidelines. QA/QC Procedures QA/QC procedures were executed to ensure all work is conducted in accordance with best practices. All drill core was sawn in half with one half of the core prepared for shipment and the other half retained for future verification. All core is under watch from the drill site to the core processing facility. Drill core is BQTK size and sample intervals range from 0.5 metres to 1.0 metres in length. Commercially prepared certified reference material ("CRM") standards and blanks were inserted with each shipment at a rate of 1 QAQC sample in every 12 core samples. Samples from New Break's 2026 Moray drilling program were analyzed at Activation Laboratories in Timmins, Ontario, which is ISO 17025 certified, by 30-gram fire assay with atomic absorption finish. Any sample assaying greater than 10.0 g/t Au was re-assayed with fire assay gravimetric analysis. Grade composite intervals over core lengths are calculated using a weighted average grade with a cut-off grade of 0.3 g/t Au. Up to 1.0 m of internal dilution (consecutive interval below cut-off grade) are included within specific geologic domains and alteration assemblages, except as otherwise noted. The composites are constrained geologically by metasomatic alteration processes sourcing from the Fiset syenite intrusion and contact mafic volcanic rocks. Elevated gold values are coincident with hematite, silica, sericite and pyrite mineralization within structurally prepared brecciated corridors flanking the intrusion. Intervals are not true widths and no top cutting has been applied to the higher gold values. About New Break Resources Ltd. New Break is a Canadian mineral exploration company focused on its Moray gold project located 49 km southeast of Timmins, Ontario, in a well-established mining camp within proximity to existing infrastructure, and 32 km northwest of the Young-Davidson gold mine, operated by Alamos Gold Inc. Shareholders are also leveraged to exploration success in Nunavut, Canada, through New Break's 20% carried interest in the Sundog gold project and ownership of 6.0 million shares of Guardian Exploration Inc. (TSXV: GX). The Company is supported by a highly experienced team of mining professionals. Appendix A – Drillhole Data and Locations Table 2 – Moray Summer 2026 Drillhole Collar Locations Hole ID Length (m) UTM Easting UTM Northing UTM Elevation Azimuth (degrees) Dip (degrees) NBR-26-29 322.0 492703 5320285 363 220 -70 NBR-26-30 250.0 492708 5320329 363 220 -47 NBR-26-31 274.0 492708 5320329 363 220 -60 NBR-26-32 352.0 492708 5320329 363 220 -70 Total 1,198.0 Coordinates are reported in UTM Zone 17 North, with units in metres. Figure 4 – Zavitz Gold Zone – Surface Traces of 2025 and 2026 Drillholes. All of the drilling at Moray has been completed by Enviro North Exploration Inc. out of Sturgeon Falls, Ontario. Drilling in the Zavitz gold zone is shown in figure 4, with the 1,996 metres in 10 holes drilled this summer depicted in red, the 2,807 metres in 20 holes drilled from January to April 2026 shown in blue and the 1,817 metres in 8 holes drilled in 2025 shown in black. In total, 6,620 metres in 38 drillholes have been completed in the Zavitz gold zone, while New Break has completed a total of 5,372 metres in 32 drillholes of our planned 2026, 10,000 metre drilling program. Appendix B – Drill Core Photos From NBR-26-29 and NBR-26-31

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) ha... READ MORE

September 16, 2026

Copyright 2026 The Prospector News