The Prospector News

VISIONARY METALS INTERCEPTS BROAD ZONES OF DISSEMINATED, MAGMATIC NICKEL MINERALIZATION IN 2023 DRILL PROGRAM

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

VISIONARY METALS INTERCEPTS BROAD ZONES OF DISSEMINATED, MAGMATIC NICKEL MINERALIZATION IN 2023 DRILL PROGRAM

 

 

 

 

 

Visionary Metals Corp. (TSX-V: VIZ) is pleased to announce results from its 2023 Reverse Circulation drill program at its King Solomon Nickel Project in Central Wyoming (Figure 1).

Highlights include:

  • 6 meters of 0.52% nickel including 1.5 m of 0.7% Ni in hole KSR23-004, approximately 220 m from last year’s intercept of 44 m of 0.23% Ni, including 17 m of 0.42% Ni in KSR22-003 (see March 6, 2023, news release).
  • Disseminated nickel mineralization in 12 of 14 holes drilled within 1 kilometer  by 600 m ultramafic body (See Table 1 on Page 4).
  • Intercumulus, magmatic nickel sulfides identified in polished thin-section analysis of RC chips.

 

“We are encouraged to see widespread nickel mineralization in all but two RC drill holes in 2023 and look forward to an expanded diamond core drilling program at King Solomon in 2024,” commented CEO Wes Adams. “The 2023 RC drill program confirmed our hypothesis that King Solomon is a large, disseminated nickel sulfide deposit and core drilling in 2024 is expected to better define distribution of mineralization, and determine true widths and grades, as RC drilling is only an indicative exploration tool. The fact that we have consistently identified magmatic sulfides in thin section analysis is also encouraging and suggests that there may be additional high-grade nickel mineralization within the system, as demonstrated in hole KSR23-004.”

The King Solomon nickel deposit represents the first of several nickel bearing ultramafic bodies identified during regional exploration along a structural corridor that has now been traced for 100 km and bears similar characteristics to other productive nickel deposits which have disseminated mineralization near surface and high-grade massive sulfide mineralization at depth. Ground based electromagnetic surveys will be conducted in Spring of 2024 to identify possible high-grade nickel sulfide targets at depth at King Solomon and at other Visionary prospects, regionally. A comprehensive 2024 exploration plan is being designed and will be discussed in future news releases.

 

Figure 1. Granite mountains ultramafic occurrences

 

Figure 2. Local geology with 2023 RC drill traces

 

King Solomon RC Drill Program Overview

 

The 2023 exploration program at King Solomon included detailed geological mapping, petrographic analysis, geophysics (gradient array, induced polarization) and an RC drill campaign using a track-mounted Schramm 685 rig. A total of 14 drill holes (Figure 2) were drilled for a total of 3,175 m to follow up on the 2022 intersection in drill hole KS22-003 of 44.5 m of 0.23% Ni, 0.01% Co (from 87 m depth), including 17.0 m of 0.42% Ni, 0.023% Co and anomalous levels of precious metals (see press release March 6, 2023). The campaign began at the end of September and was completed at the beginning of November. Mineralized intercepts were encountered in every hole except for KSR23-008, which was drilled northeast of the target structure.

Figure 3. Cross-section showing nickel mineralization within magmatic intrusive.

 

  

Mineralization was encountered from approximately 15 m true depth (KS23-004) to a maximum true depth of 225 m (KS23-005, KS23-0010). Nickel values are lower and often wider than in the 2022 discovery diamond core drill hole KS22-003. For example, adjacent hole KSR23-014 intersected 70 m at 0.15 % Ni compared to core hole KS22-003 44.5 m of 0.23% Ni. The decrease in nickel grades and increase in down hole width could be the result of sample dilution and mixing. An unexpected and large amount of groundwater was encountered in many of the RC holes, potentially causing the loss of fines in the slurry water and mixing of material in sample intervals. Core drilling will be required to further define the exact widths and grades of mineralization.

Thin Section Analysis

  • Polished thin-section samples were observed with a Leitz SM-Lux incident and transmitted light polarizing microscope.
  • Samples of hand selected chips from six reverse circulation drill holes (KSR23-003-005, 007, 010, 013) contain disseminated, cuspate, intercumulus, magmatic pyrrhotite-pentlandite/violarite assemblages.
  • Magnetite-rich nickel mineralization only occurs near last year’s intersection in core hole KS22-003, suggesting this area represents a local zone of digested magnetite-garnet sediment rafts. The bulk of the ultramafic intrusion contains typical magmatic pyrrhotite-nickel sulfide mineralization.
  • Such primary igneous features suggest high potential for massive nickel sulfides.

 

Regional Geology and Exploration Summary

 

The Granite Mountains district is dominated by Archean granite, granite-gneiss and banded iron formation, within which younger Archean peridotite to pyroxenite bodies occur over a length of 100 km, defining an underexplored Archean Greenstone Belt (Figure 1). Visionary’s land package covers many of these outcropping ultramafic bodies and has recently expanded to approximately 13,686 acres, or 55km2 including 520 unpatented 20-acre mining claims on Bureau of Land Management lands and 3286 acres of Wyoming State lease lands.  During the 2023 field season, many nickeliferous ultramafic occurrences were inspected, all of which were unexplored prior to Visionary’s exploration efforts. Visionary’s inhouse geophysical crews conducted ground magnetic, dipole-dipole, and gradient array induced polarization (“IP”) surveys. We have now identified many magnetic anomalies west of King Solomon that correspond with interpreted ultramafics at Tin Cup to the west of King Solomon. A drill-ready target exists 900 m west of King Solomon, at the Dumbbell prospect, on an outcropping peridotite with a coincident gradient array IP anomaly. Tin Cup contains numerous drill-ready ultramafic-IP targets. Disseminated nickel sulfides have been identified microscopically in an olivine pyroxenite 20 km east of King Solomon. All of this highlights the excellent potential for nickel sulfide discoveries regionally and within Visionary’s strong land position and proximity to excellent infrastructure.

Next Steps

 

The 2024 field season will focus on electromagnetic surveying (“EM”) surveying to evaluate for potential massive sulfide bodies at depth and core drilling to determine actual grades and widths and to increase knowledge of the broad zones of mineralization intercepted in the 2023 RC drill program at King Solomon. Regional nickel exploration in the Granite Mountains is planned to include core drilling at Tin Cup, 9 km West of King Solomon and at Dumbbell, which is a new nickel target identified 1 km west of King Solomon.  EM Surveys will also take place at these locations and at Black Rock, where hole BR22-001 intercepted 33 m of 0.15% nickel in the 2022 drill program.

Technical Disclosure, Quality Assurance/Quality Control:

 

A qualified geologist supervised the entire drill campaign and was on site for logging, sampling and monitoring of drill activities. The Schramm 685 RC rig came with 10-foot (3.05 m) rods and an attached sampling cyclone with sample splitter. Two samples of approximately 5 kg were collected for each 5-foot (1.52 m) drill interval, as well as sieved samples for logging chip trays.

One bagged sample was retained for archival purposes and one sample was shipped to the ALS Minerals Laboratory in Reno, Nevada (ALS) (ISO/IEC 17025:2017 accredited) from Visionary’s secure core logging facility. Shipping from site to the shipper was supervised by Visionary staff. Bags contained a unique barcoded sample number that was trackable in the ALS system.

Prior to shipping, Visionary staff inserted the following QA/QC samples after approximately every 20th sample: An internationally certified, low grade nickel sulfide sample assaying 0.63% Ni (Geostats Pty. Ltd., certified geochemical base metal reference material: GBM997-5); a commercially available marble blank, and some previous drill sample duplicates.

Upon receipt at the lab, samples were scanned into a laboratory information management system (LIMS) for sample tracking, scheduling, quality control, and electronic reporting. Samples were dried in special drying ovens prior to crushing. The samples were crushed to -2 mm and a riffle split of 250 grams was then pulverized to 85% achieving a size of <75 microns using a low chrome steel, ring-puck pulverizing vessels. Quality control testing of pulverizing efficiency was routinely conducted by ALS. The lab also conducted its own analysis QA/QC, inserting internationally certified standards, blanks, and duplicates. Samples for holes KSR23-002 to 014 were analyzed at the ALS laboratory in Vancouver, British Columbia, Canada by method ME-MS61, a high precision, multi-acid digest including Hydrofluoric, Nitric, Perchloric and Hydrochloric acids. Hole KSR23-001, which was analyzed with Method ME-MS41, a low detection limit aqua regia method. Each aliquot was analysed by ICP (inductively coupled plasma) mass spectrometry that produced results for 48 elements. Chip tray intervals were analysed qualitatively with a handheld Olympus Vanta Xray Fluorescence (XRF) unit to help guide geological logging of drill chips. At the start of each run, the instrument was calibrated with the machine’s calibration disk. The GBM997-5 nickel standard and a blank disk were analyzed after approximately every 20th sample.

Qualified Person

 

The scientific and technical information in this announcement as it relates to exploration results is based on information reviewed by Mr. Michael Page (FAusIMM), a Qualified Person pursuant to National Instrument 43-101 – Standards of Disclosure for Mineral Projects of the Canadian Securities Administrators. Mr. Page has 50 years of relevant nickel exploration experience in the style of mineralization under consideration and fulfills the requirements to be a Qualified Person. Mr. Page consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears. Mr. Page is the Company’s Chief Geologist.

Visionary Metals Corp. is a Vancouver-based mineral exploration company focused on making new electric metals discoveries in Fremont County, Wyoming. Visionary’s mission is to explore responsibly and to develop resources in a manner that is beneficial to all stakeholders. While central Wyoming has a strong mining history and favourable geologic conditions to host many types of metal deposits, it has never been systematically explored using modern techniques. The Company now controls a land package greater than 80 square kilometres with numerous drill ready targets, all accessible by road and within a one-hour drive from Visionary’s US headquarters in Lander County, Wyoming.

Posted January 16, 2024

Share this news article

MORE or "UNCATEGORIZED"


New Found to Acquire Labrador Gold’s Kingsway Project

New Found Gold Corp. (TSX-V: NFG, NYSE-A: NFGC) is pleased to an... READ MORE

April 22, 2024

AbraSilver Announces C$20 Million in Strategic Investments by Kinross Gold and Central Puerto and Formation of a Regional Partnership in Argentina

AbraSilver Resource Corp. (TSX-V: ABRA) (OTCQX: ABBRF) is pleased... READ MORE

April 22, 2024

Ascot Pours First Gold During Commissioning at the Premier Gold Project

Ascot Resources Ltd. (TSX: AOT; OTCQX: AOTVF) is pleased to annou... READ MORE

April 22, 2024

G Mining Ventures and Reunion Gold Announce Combination to Set the Stage for a Leading Intermediate Gold Producer in the Americas

Sets the stage for the creation of a leading intermediate gold pr... READ MORE

April 22, 2024

GOLD ROYALTY ANNOUNCES RECORD TOTAL REVENUE, LAND AGREEMENT PROCEEDS AND INTEREST AND GEOS

Gold Royalty Corp. (NYSE American: GROY) is pleased to announce ... READ MORE

April 22, 2024

Copyright 2024 The Prospector News