*1.10 G/T AUEQ (0.98 G/T AU, 0.54 G/T AG, 0.07 % CU) OVER 103 M

Troilus Mining Corp. (TSX: TLG) (OTCQX: CHXMF) (FSE: CM5), is pleased to announce the third batch of results from the Z87 optimization drill program, as part of its ongoing 2026 Exploration activities at its Troilus Project located in north-central Quebec, Canada. The results reported include 10 drill holes totalling 4,230 metres, following the exploration program outlined in the Company’s March 31, 2026 press release.

The on-going Z87 optimization program is designed to upgrade inferred material and target unsampled intervals from historic drilling within the hangingwall of the main ore zone. All results returned are within the Z87 reserve pit, as defined in the Feasibility Study (see May 14, 2024 press release) and support the Company’s objective of evaluating opportunities to enhance future mine planning, including potential resource conversion, pit sequencing optimization, strip ratio improvements and early-year mill feed.

Z87 Intercept Highlights (see Figure 1):

• Hole 87-26-484 intersected 1.10 g/t gold equivalent (0.98 g/t Au, 0.54 g/t Ag, 0.07% Cu) over 103 m, including 2.10 g/t AuEQ (1.86g/t Au, 0.84 g/t Ag, 0.15 % Cu) over 34 m starting at 442 m downhole from an area of inferred material within the Z87 reserve pit.
• Hole 87-26-492 intersected 1.98 g/t gold equivalent (1.41 g/t Au, 33.49 g/t Ag, 0.10 % Cu) over 14 m, including 9.87g/t AuEQ (5.95 g/t Au, 260.80 g/t Ag, 0.37 % Cu) over 1.5m from the Z87 hangingwall starting at 162 m downhole.
• Hole 87-26-512 intersected 0.92 g/t gold equivalent (0.79 g/t Au, 0.94 g/t Ag, 0.07 % Cu) over 93 m, including 2.30 g/t AuEQ (2.13 g/t Au, 1.34 g/t Ag, 0.10 % Cu) over 21m starting at 494 m downhole. This intercept expands mineralization beyond limited historic sampling.

Justin Reid, CEO of Troilus, commented, “The drills keep producing phenomenal numbers from the Z87 reserve pit – these latest results continue to validate what we have been seeing throughout our mine plan optimization program. As drilling progresses, we are consistently intersecting mineralization in areas that were either historically unsampled or classified as waste within the reserve pit and systematically optimizing the resource model in the process. These particular results demonstrate that there is more mineralization to be defined in many areas of the reserve pit and significant high-grade material just behind existing pit walls. We expect that successfully targeting inferred material and expanding new high-grade trends in the hangingwall should translate to more tonnage and an improved strip ratio during early mining phases.”

Z87 was one of two zones previously mined by open pit. Historic drilling within the reserve pit included numerous unsampled intervals that, for resource estimation purposes, are assigned values equal to half the laboratory detection limit. These gaps represent the focus of the current optimization program, which is targeting opportunities to convert waste to potential ore while upgrading inferred material for future mine plan updates.

All grades are uncut, and true thicknesses are approximately 75% to 90% of drilled length.

*The completed NI 43-101 technical report associated with the Troilus Project FS can be found on SEDAR+ at www.sedarplus.ca under the Company’s issuer profile or on the Company’s website at www.troilusmining.com

Figure 1. Plan map with the reported drill hole locations from Z87

 Figure 2. Cross section showing results for drillhole 87-26-484 and 87-26-588.

 Figure 3. Cross section showing results for drillhole 87-26-492 and 87-26-494.

 Figure 4. Cross section showing results for drillhole 87-26-512.

Z87 Drilling

Dillholes 87-26-484 was drilled to target inferred material within the Z87 reserve pit. The main zone returned 103 metres grading 1.10 g/t AuEQ including 2.10 g/t AuEQ over 34 metres, while the haningwall returned intercepts of 0.38 g/t AuEQ over 20 metres, 0.53 g/t AuEQ over 12.3 metres including 5.90 g/t AuEQ over 0.8 metres, and 0.41 g/t AuEQ over 43 metres including 1.18 g/t AuEQ over 5 metres from areas of the block model that do not currently contain significant mineralization. Updated modelling that includes these new results could positively impact the strip ratio within the Z87 phase 1 pit.

Just beyond the existing pit wall drillhole 87-26-492 encountered 14 metres grading 1.98 g/t AuEQ including 9.87 g/t AuEQ over 1.5 metres. This intercept shows significantly more high-grade material than is currently represented in the block model and is a good example of the opportunities that remain for additional high-grade tonnage within the phase 1 Z87 reserve pit.

Drillhole 87-26-512 was planned to twin historic drillhole KN-657 that was only sampled as it passed through the primary Z87 ore zone. This hole returned 93 metres grading 0.92 g/t AuEQ, including 2.30 g/t AuEQ over 21 metres from the main zone of Z87, and also returned 0.86 g/t AuEQ over 13 metres including 1.29 g/t AuEQ over 6 metres and 0.43 g/t AuEQ over 12 metres from the previously unsampled hangingwall. Assay data from historic hole KN-657 is currently being used in the resource estimation, with unsampled intervals assigned a value equal to half the laboratory analysis detection limit. This estimation has resulted in large gaps in the block model, particularly in the hangingwall of the main Z87 ore zone. Drillholes like 87-26-512 have successfully tested these gaps for additional mineralized material.

To date, Troilus has released 30 drill holes totaling 9,793 metres of the approximately 24,000 metres allocated to the Z87 pit optimization program, which includes the targeting of inferred and unsampled material within and around the reserve pit shell.

Table 1. Z87 Drill Results

* AuEq =  Au grade + 1.5628 * Cu grade + 0.0128 * Ag grade

Quality Assurance and Control

During the drill program, one meter assay samples were taken from NQ core and sawed in half. One-half was sent for assaying at ALS Laboratory in Sudbury Ontario, a certified commercial laboratory, and the other half was retained for results, cross checks, and future reference. A strict QA/QC program was applied to all samples; which included insertion of one certified mineralized standard and one blank sample in each batch of 25 samples. Every sample was processed with standard crushing to 85% passing 75 microns on 500 g splits. Samples were assayed by one-AT (30 g) fire assay with an AA finish and if results were higher than 3.5 g/t Au, assays were redone with a gravimetric finish. For QA/QC samples, a 50 g fire assay was done. In addition to gold, ALS laboratory carried out multi-element analysis for ME-ICP61 analysis of 33 elements four acid ICP-AES.

Qualified Person

The technical and scientific information in this press release has been reviewed and approved by Nicolas Guest, P.Geo., Exploration Manager, who is a Qualified Person as defined by NI 43-101. Mr. Guest is an employee of Troilus and is not independent of the Company under NI 43-101.

AuEq Disclosure

The formulas used to calculate equivalent values for resources are as follows, for 87 Pit AuEq = Au + 1.5628*Cu +0.0128 *Ag, for J Pit AuEq = Au + 1.5107*Cu +0.0119 *Ag, for SW Pit AuEq = Au + 1.6823*Cu +0.0124 *Ag, for X22 Pit AuEq = Au + 1.5628*Cu +0.0128 *Ag. AuEq was calculated using metal prices of $1,850/oz Au; $4.25/lb Cu and $23.00/oz Ag and recoveries of 93.1% for Au, 88.9% for Ag and 89.3% for Cu in the J pit, 95.5% for Au, 98.2% for Ag and 94.7% for Cu in the 87 pit, 85.7% for Au, 85.6% for Ag and 91.5% for Cu in the SW pit and 95.5 % for Au, 98.2% for Ag and 94.7% for Cu in the X22 pit.

About Troilus Mining Corp.

Troilus Mining Corp. is a Canadian development-stage mining company focused on the systematic advancement of the former gold and copper Troilus Mine towards production. Troilus is located in the tier-one mining jurisdiction of Quebec, Canada, where it holds a large land position of 435 km² in the Frôtet-Evans Greenstone Belt. A Feasibility Study completed in May 2024 supports a large-scale 22-year, 50ktpd open-pit mining operation, positioning it as a cornerstone project in North America.