Superior Gold Inc. (TSX-V: SGI) is pleased to announce additional results from the ongoing underground diamond drill program at its 100%-owned Plutonic Gold mine in Western Australia. The drilling was conducted from March 1, 2018 to April 30, 2018 and is part of the year-round ongoing program of underground drilling.
This work was completed with two diamond drill rigs. A third was added in May which is entirely focused on expanding reserves and resources.
Results are provided for 169 drill holes for a total of approximately 12,600 metres. The drill holes were completed for resource definition and grade control purposes. Resource definition was designed to increase the confidence level of the resource in areas where drilling was limited as part of the ongoing work to upgrade resources to reserves. Grade control drilling was completed to provide additional information for stope design ahead of mining.
The drilling focussed on six zones – Caribbean, Caspian, Cortez, Indian, Pacific, and Timor. A number of significant intersections were encountered.
KEY FINDINGS
The location of the most significant intersections are shown in Figure 1 and the details of all holes are summarized by zone in Table 2. Reported intersections are over a minimum downhole width of 0.30 metres (0.20 metres true width).
Chris Bradbrook, President and CEO of Superior Gold stated: “Our underground diamond drill program continues to be successful in intersecting high grade mineralzation across multiple zones at Plutonic underground. These results, together with previously reported drill data since we acquired the asset, continue to support our thesis that Plutonic is a long life asset that will be in production for many years to come. With three active underground rigs, we continue to accelerate towards a second reserve and resource estimate which will use data accumulated up until the end of 2018.”
HIGHLIGHTS
The most significant intersections are summarized in Table 1 below:
Table 1 – Key Intersections
Designed Target |
Drill Hole # |
Easting (Mine Grid) |
Northing (Mine Grid) |
Drill hole collar RL (Mine Grid) |
Dip (degrees) |
Azimuth (degrees, Mine Grid) |
End of hole depth (m) |
Downhole From (m) |
Downhole To (m) |
Downhole Intersection (m) |
Au (gpt) uncut |
Est True Thickness (m) |
CARIBBEAN | UDD19938 | 4596 | 11739 | 1095 | -20 | 70 | 71 | 25.50 | 27.90 | 2.40 | 7.8 | 1.7 |
Including | 26.35 | 27.20 | 0.85 | 21.0 | 0.6 | |||||||
UDD20317 | 4721 | 11495 | 1208 | -37 | 34 | 36 | 17.50 | 18.50 | 1.00 | 18.2 | 0.7 | |
UDD20327 | 4728 | 11489 | 1208 | -31 | 51 | 41 | 23.00 | 25.00 | 2.00 | 16.3 | 1.4 | |
CASPIAN | UDD20068 | 4953 | 10931 | 1361 | 2 | 201 | 45 | 32.20 | 32.70 | 0.50 | 75.1 | 0.4 |
UDD20074 | 4927 | 10941 | 1359 | -39 | 202 | 80 | 33.10 | 34.10 | 1.00 | 29.3 | 0.7 | |
UDD20077 | 4918 | 10947 | 1361 | 28 | 201 | 72 | 56.85 | 59.15 | 2.30 | 15.1 | 1.6 | |
UDD20078 | 4917 | 10947 | 1359 | -24 | 201 | 74 | 16.70 | 17.90 | 1.20 | 13.0 | 0.8 | |
Including | 17.30 | 17.90 | 0.60 | 23.9 | 0.4 | |||||||
UDD20092 | 4874 | 10973 | 1359 | 0 | 201 | 76 | 27.00 | 29.00 | 2.00 | 15.4 | 1.4 | |
UDD20101 | 4966 | 10921 | 1362 | 12 | 174 | 165 | 71.74 | 76.80 | 5.06 | 11.6 | 3.5 | |
Including | 71.74 | 73.13 | 1.39 | 31.8 | 1.0 | |||||||
CORTEZ | UDD19730 | 4876 | 11952 | 1199 | 77 | 292 | 79 | 17.50 | 18.40 | 0.90 | 28.6 | 0.6 |
UDD20307 | 4998 | 12279 | 1169 | 70 | 128 | 96 | 72.70 | 78.10 | 5.40 | 14.2 | 3.8 | |
Including | 76.10 | 78.10 | 2.00 | 33.7 | 1.4 | |||||||
UDD20308 | 4975 | 12272 | 1168 | 56 | 160 | 109 | 0.00 | 7.20 | 7.20 | 9.7 | 5.0 | |
Including | 0.00 | 1.00 | 1.00 | 51.7 | 0.7 | |||||||
UDD20309 | 4966 | 12270 | 1167 | 56 | 160 | 110 | 0.50 | 5.40 | 4.90 | 9.8 | 3.4 | |
Including | 0.50 | 2.40 | 1.90 | 18.3 | 1.3 | |||||||
and | 5.00 | 5.40 | 0.40 | 31.5 | 0.3 | |||||||
INDIAN | UDD20145 | 3977 | 11448 | 1136 | -31 | 153 | 165 | 33.72 | 34.72 | 1.00 | 22.1 | 0.7 |
137.63 | 138.35 | 0.72 | 35.3 | 0.5 | ||||||||
PACIFIC | UDD20198 | 4823 | 12787 | 1132 | -9 | 79 | 87 | 34.80 | 35.80 | 1.00 | 22.8 | 0.7 |
and | 49.00 | 51.00 | 2.00 | 24.2 | 1.4 | |||||||
UDD20224 | 4900 | 13001 | 1195 | 73 | 195 | 71 | 42.30 | 44.30 | 2.00 | 24.7 | 1.4 | |
UDD20225 | 4900 | 13000 | 1193 | 40 | 195 | 77 | 26.70 | 27.80 | 1.10 | 35.6 | 0.8 | |
Including | 26.70 | 27.50 | 0.80 | 47.5 | 0.6 | |||||||
UDD20232 | 4941 | 13010 | 1201 | 66 | 189 | 74 | 28.05 | 30.85 | 2.80 | 17.8 | 2.0 | |
Including | 28.05 | 28.55 | 0.50 | 84.2 | 0.4 | |||||||
TIMOR | UDD20278 | 4503 | 12682 | 1039 | 10 | 267 | 51 | 5.30 | 8.30 | 3.00 | 10.3 | 2.1 |
Including | 5.30 | 6.30 | 1.00 | 19.6 | 0.7 | |||||||
35.90 | 40.45 | 4.55 | 89.4 | 3.2 | ||||||||
UDD20281 | 4503 | 12683 | 1039 | 20 | 274 | 64 | 30.30 | 35.95 | 5.65 | 12.3 | 4.0 | |
Including | 33.30 | 34.30 | 1.00 | 26.4 | 0.7 | |||||||
and | 34.80 | 35.40 | 0.60 | 39.3 | 0.4 | |||||||
UDD20282 | 4503 | 12683 | 1040 | -10 | 282 | 33 | 7.90 | 11.00 | 3.10 | 14.3 | 2.2 | |
Including | 7.90 | 9.30 | 1.40 | 29.1 | 1.0 | |||||||
UDD20283 | 4503 | 12683 | 1040 | 8 | 274 | 74 | 3.60 | 6.80 | 3.20 | 29.0 | 2.2 |
Qualified Person
Scientific and technical information in this news release has been reviewed and approved by Pascal Blampain, who is a member of the AusIMM and the Australian Institute of Geoscientists (AIG) and a “qualified person” within the meaning of NI 43-101. Mr. Blampain is an employee of the Company and serves as Chief Geologist.
Quality Control Protocols
Core is drilled BTW core diameter (42 mm). Core intervals are whole core sampled. All gold results were determined by ALS Minerals (Perth) using fire assay fusion (40g charge, lead collection method) with an ICP finish. Drill program design, Quality Assurance/Quality Control and interpretation of results are performed by qualified persons employing a Quality Assurance/Quality Control program consistent with NI 43-101 and industry best practices. Standards, blanks and duplicates are included in approximately every 20 samples for Quality Assurance/Quality Control purposes by the Company as well as the laboratory. Approximately 5% of sample pulps are sent to secondary laboratories for check assays.
About Superior Gold
Superior Gold is a Canadian based gold producer that owns 100% of the Plutonic Gold operations located in Western Australia. The Plutonic Gold operations include the Plutonic underground gold mine, which is a producing underground operation with a central mill, the Hermes open pit gold mine and an interest in the Bryah Basin joint venture. Superior Gold is focused on expanding production at the Plutonic Gold operations and building an intermediate gold producer with superior returns for shareholders
Significant copper and molybdenum intersections include: HM09: 13... READ MORE
Aya Gold & Silver Inc. (TSX: AYA) (OTCQX: AYASF) is pleased t... READ MORE
Key Highlights – Preliminary Economic Assessment Pre-Tax Net Pr... READ MORE
Aris Mining Corporation (TSX: ARIS) (NYSE-A: ARMN) announces its ... READ MORE
Orla Mining Ltd. (TSX: OLA) (NYSE: ORLA) announces the results fo... READ MORE