
Highlights
Selkirk Copper Mines Inc. (TSX-V: SCMI) (FSE: IO20) (OTCQX: SKRKF) is pleased to announce completion of the Phase 2 drill program, as well as additional assay results from this program, which commenced in May 2026, at the Minto Project in Yukon, Canada.
“Our commitment of 106,901 meters of NQ diamond drilling underpins our confidence in the potential to restart operations at Minto and we look forward to incorporating the results of the Phase 2 program into an updated Mineral Resource Estimate in Q1 2027.
“Coincident with completing the Phase 2 drilling, the engineering and project team initiated a Feasibility Study at that start of November 2026 that is focused on improving the already positive economics of the September 2026 Preliminary Economic Assessment (PEA). In addition, our environmental and permitting team is finalizing the amended permit applications which will be submitted to the Yukon Environmental and Socio-economic Assessment Board (YESAB) as a Category 2 Designated Office application in December 2026.
“In 15 months from initiating the Phase 1 drill program and resuming trading as Selkirk Copper Mines Inc., our team, with support from a wide range of Yukon-based suppliers and service providers, independent engineering firms, specialist consultants and advisors, and importantly the support of the Selkirk First Nation, has described a positive economic future for the Minto Project and set the stage for additional growth and improvement. We look forward to continuing with the positive pace and positive results from 2026 in 2027.”
Phase 2 Drill Program
The Phase 2 drill program was planned with a target of 50,000 metres focused on expansion, exploration, and infill drilling of priority areas, as well as geotechnical data collection. Drilling productivity throughout the program was typically very high, with individual drills producing more than 200 metres over 24 hours on several occasions, and an average of 1 or 2 drill holes completed every day throughout the six-month program. Due to efficiencies of logistics and cost, the team identified opportunities to complete additional metres while remaining on-schedule and on-budget.
The final drill holes of the Phase 2 program were completed on October 15th, and the final core logging, core cutting, and sample shipping was completed on November 7th. Turnaround time for assay results is currently approximately eight weeks. Assay results are expected to continue being released throughout the fall and winter of 2026. Reported below are results from holes drilled in June and July.
Taken together with the previous Phase 1 Program, which began in August 2025, the company has completed 106,879 metres in 424 drill holes over a span of 14 months. This represents a 29% increase over all previous drilling that has been completed at the Minto Project over six decades, which had previously totalled 374,370 metres. The company’s drilling during 2025-2026 represents one of the largest single-year drill programs in Yukon mineral exploration history. The results of the Phase 1 Drill Program were used to support the recently released 2026 mineral resource estimation and preliminary economic assessment. The results of the Phase 2 drill program have not yet been incorporated into any mineral resource estimate or economic assessment and will inform an updated mineral resource estimate that is planned to be completed in March 2027.
Table 1: Summary of Phase 2 Drilling Completed by Location
| Zone | Holes Completed | Meters Drilled | Holes with Assays Reported |
| Minto North | 38 | 9,579 | 21 |
| Minto East | 12 | 3,748 | 3 |
| Minto Main | 28 | 10,037 | 16 |
| Area 118 | 46 | 13,463 | 15 |
| Copper Keel | 51 | 11,078 | 24 |
| Ridgetop | 44 | 4,926 | 0 |
| Exploration 2026 | 4 | 1,749 | 0 |
| Total | 223 | 54,579 | 79 |

Figure 1: Plan view of the Minto Mine Property showing surface projections of mineralized zones as well as Phase 1 and Phase 2 drill collars. Drill hole results presented in this release are highlighted
Minto North Drill Results
At Minto North, the Phase 2 drill program is targeting infill and expansion of priority planned mining areas. Reported here are four drill holes that targeted the 202 Lens, three of which intersected significant mineralization.
Hole 26SCM241 was drilled in the eastern portion of the 202 Lens, targeting a 70-metre gap between previous drill holes. Mineralization was intersected at the expected elevation but with higher grade and thickness than previous drilling. Notably, individual samples within 26SCM241 include high gold grades, with values as high as 35.2 g/t Au, 1.37% Cu and 6.3 g/t Ag. This mineralized interval is comprised of strongly foliated, migmatized rock hosting chalcopyrite, bornite, and covellite mineralization. The results of this drill hole confirm the high-grade nature of mineralization within the 202 Lens and will support increased confidence for resource estimation and mine planning.
Holes 26SCM250 and 26SCM267 were drilled to test the margin of the 202 Lens to the east and north, respectively. Both holes intersected significant mineralized intervals including 1.19% CuEq over 8.5 m in 26SCM250, and 1.84% CuEq over 10.6 m in 26SCM267. The results of these holes indicate that mineralization in the 202 Lens extends further than previously modelled and remains a priority target for future drilling.
Additional drill hole results targeting the 202 Lens are pending as part of the Phase 2 drill program.

Figure 2: Cross section of drill holes intersecting the 202 Lens at Minto North
Area 118 Drill Results
In Area 118, Phase 2 drilling is targeting expansion and delineation of several mineralized lenses located close to existing underground development, including the 301 Lens which was discovered during the Phase 1 drill program. Reported here are three drill holes targeting the 301 Lens that were planned as 50-metre and 75-metre step-outs beyond the limits of previous drilling. All three of the holes reported here intersected significant mineralization beyond the extents of the previous resource estimation.
Notable amongst the results reported here is hole 26SCM248 which intersected 3.28% CuEq over 5.2 metres. This result demonstrates the potential for further expansion of high-grade mineralization in the 301 Lens, which is located within 150 metres of the existing underground decline.
Several additional drill holes targeting the 301 Lens are pending as part of the Phase 2 drill program, as shown by the orange drill traces highlighted in Figure 3 below.

Figure 3: Cross section and plan view of drill holes intersecting the 301 Lens in Area 118.
Minto Main Drill Results
In the Minto Main area, Phase 2 drilling is targeting expansion and delineation of mineralized lenses located between and beneath previous open pit and underground mining areas. Reported here are three drill holes targeting infill of the 114 and 117 Lenses, all three of which intersected significant mineralization.
Notable results reported here include hole 26SCM240 which was designed as an infill hole targeting a 90-metre gap between previous drill holes. This hole intersected 4.86% CuEq over 3.3 metres within a broader interval of 1.84% CuEq over 10.2 metres. Mineralization was intersected at the expected elevation and with the expected thickness, but with higher grade than expected. The results of this drill hole indicate potential for higher grade mineralization within the Minto Main area and will support increased confidence for resource estimation and mine planning.
Additional drill hole results targeting the Minto Main area are pending as part of the Phase 2 drill program.

Figure 4: Cross section of drill holes intersecting the 114 and 117 Lenses in the Minto Main area.
Copper Keel Drill Results
At Copper Keel, Phase 2 drilling is targeting infill and expansion of several shallowly dipping mineralized lenses. Reported here are two drill holes targeting the southern portion of the 101 Lens within the Copper Keel resource area, both of which intersected significant mineralization.
Notable results reported here include hole 26SCM254, which returned an intercept of 1.91% CuEq over 9 metres within a broader interval of 0.83% CuEq over 53 metres. This drill hole indicates potential for locally thicker intervals of mineralization that may warrant consideration for a bulk mining method.
Additional drill hole results targeting Copper Keel are pending as part of the Phase 2 drill program.
Table 2: Collar Locations and Header Information
| Hole ID | Easting | Northing | Azimuth | Dip | EOH (m) | Zone | Category |
| 26SCM240 | 384694 | 6944580 | 32 | -63 | 417 | Minto Main | Infill |
| 26SCM241 | 384115 | 6945836 | 285 | -80 | 243 | Minto North | Infill |
| 26SCM245 | 384695 | 6944579 | 40 | -68 | 408 | Minto Main | Infill |
| 26SCM248 | 384575 | 6943970 | 148 | -60 | 292.3 | 118 | Expansion |
| 26SCM249 | 385679 | 6943617 | 289 | -72 | 261 | Copper Keel | Infill |
| 26SCM250 | 384115 | 6945836 | 61 | -56.5 | 270 | Minto North | Expansion |
| 26SCM251 | 384576 | 6943971 | 136 | -69 | 351 | 118 | Expansion |
| 26SCM252 | 384801 | 6944802 | 123 | -66 | 393 | Minto Main | Expansion |
| 26SCM253 | 384114 | 6945835 | 240 | -66 | 285 | Minto North | Expansion |
| 26SCM254 | 385679 | 6943618 | 292 | -84 | 159 | Copper Keel | Infill |
| 26SCM267 | 384014 | 6945994 | 306 | -60 | 258 | Minto North | Infill |
| 26SCM268 | 384511 | 6943789 | 144 | -66 | 258 | 118 | Expansion |
| Coordinate System used for Drill Collar Easting and Northing is NAD 83 UTM Zone 8N. | |||||||
Table 3: Significant Interval Table
| Hole ID | From | To | Length (m) | Cu % | Au g/t | Ag g/t | CuEq % | Zone | Category | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM240 | 287.0 | 293. | .1 | 1.26 | 0.37 | 4.3 | 1.49 | Minto Main | Infill | ||||||||||||||||||||||||||||||||||||||||||
| and | 341.3 | 351.5 | 10. | .35 | 0.64 | 9.3 | 1.84 | Minto Main | Infill | ||||||||||||||||||||||||||||||||||||||||||
| incl. | 341.3 | 344.6 | 3.3 | 3.44 | 1.80 | 25.5 | 4.86 | Minto Main | Infill | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM241 | 212.1 | 231.6 | 19. | .27 | 1.49 | 5.6 | 2.45 | Minto North | Infill | ||||||||||||||||||||||||||||||||||||||||||
| incl. | 212.1 | 217.0 | 4.9 | 2.45 | 4.36 | 11.1 | 5.97 | Minto North | Infill | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM245 | 302.3 | 314.8 | 12.4 | 1.01 | 0.49 | 4.6 | 1.37 | Minto Main | Infill | ||||||||||||||||||||||||||||||||||||||||||
| and | 328.6 | 342.0 | 13. | .70 | 0. | .8 | 0.77 | Minto Main | Infill | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM248 | 248.8 | 254.0 | 5.2 | 2.68 | 0.88 | 13.5 | 3.28 | 118 | Expansion | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM249 | 137.0 | 149.0 | 12.0 | 1.10 | 0.20 | 2.0 | 1.18 | Copper Keel | Infill | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM250 | 247.0 | 255.5 | 8.5 | 0.91 | 0. | .7 | 1.19 | Minto North | Expansion | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM251 | 181.8 | 185.5 | 3.7 | 0.78 | 0.03 | 1.0 | 0.74 | 118 | Expansion | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM252 | 188.0 | 193.0 | 5.0 | 1.18 | 0.18 | 4.7 | 1.26 | Minto Main | Expansion | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM253 | No Significant Intercept | Minto Main | Expansion | ||||||||||||||||||||||||||||||||||||||||||||||||
| 26SCM254 | 94.0 | 147.0 | 53.0 | 0.68 | 0.23 | 1.9 | 0.83 | Copper Keel | Infill | ||||||||||||||||||||||||||||||||||||||||||
| incl. | 95.0 | 104.0 | 9.0 | 1.52 | 0.61 | 3.5 | 1.91 | Copper Keel | Infill | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM267 | 222.7 | 248.6 | 26.0 | 0.84 | 0.33 | 3.6 | 1.07 | Minto North | Infill | ||||||||||||||||||||||||||||||||||||||||||
| incl. | 238.0 | 248.6 | 10.6 | 1.40 | 0.62 | 6.3 | 1.84 | Minto North | Infill | ||||||||||||||||||||||||||||||||||||||||||
| 26SCM268 | 54.0 | 62. | . | .69 | 0. | .3 | 0.89 | 118 | Expansion | ||||||||||||||||||||||||||||||||||||||||||
| and | 215.5 | 229.0 | 13.5 | 0.85 | 0.46 | 4.4 | 1.19 | 118 | Expansion | ||||||||||||||||||||||||||||||||||||||||||
| CuEq Calculation: CuEq = ((Cu% × CuP × RCu × 22.0462)+(Au g/t ÷ 31.1035 × AuP × RAu) + (Ag g/t ÷ 31.1035 × AgP × RAg ))/(CuP × RCu × 22.0462) Where: CuP/AuP/AgP = USD$ commodity prices of $4.60/lb Cu, $3,300/oz Au, $40/oz Ag; RCu = Cu Recovery = 90%; RAu = Au Recovery = 80%; RAg= Ag Recovery = 80% Recoveries as estimated from historical mineral processing results. |
|||||||||||||||||||||||||||||||||||||||||||||||||||
QAQC Procedures and Data Validation
The Company is drilling NQ-diameter core and completing geological logging with oriented core structural data collection. Following data collection, core is cut along the long axis, with half of the core going to the lab for chemical analysis and the remaining half kept in sequence as record. The half core samples are packaged with the corresponding sample tag id and sealed. All sampling is conducted by Selkirk Copper and is subject to Company standard internal quality control and quality assurance (QAQC) programs. QAQC procedures include the insertion of certified reference material, coarse blank materials, and field duplicate analysis, as well as standard laboratory procedures to monitor contamination during preparation, analytical accuracy, and precision. QAQC insertion rates by Selkirk Copper approximate 15% of all samples at set intervals.
For the Phase 2 drill program, all samples were sent to ALS’s prep facility in Whitehorse, then shipped to ALS’s analytical laboratory in Vancouver. All samples are prepared by crushing rock to 70% passing 2mm screen, then splitting a 250g sub-sample using a riffle splitter before being pulverized 85% passing 75 microns. Gold is analyzed by 30 g Fire Assay (Au-AA23) with atomic absorption (AAS) analysis followed by gravimetric finish for overlimit results. Copper and silver are analyzed by four-acid digest (ME-ICP61) with inductively coupled plasma – atomic emission spectroscopy (ICP-AES) finish. If copper or silver overlimit results are triggered a second four-acid digest for high grade copper (Cu-OG62) and silver (Ag-OG62) is conducted. Samples containing greater than 1000 ppm copper are also analyzed for soluble copper using a sulphuric acid leach (Cu-AA05) analysis with AAS finish. ALS Vancouver holds an ISO/IEC 17025 standard accreditation.
QAQC results are reviewed by Selkirk Copper upon receipt of assay results. Overall, QAQC results show strong analytical performance across Cu, Au, and Ag datasets. All control standards are within acceptable tolerance, with no significant outliers or systematic bias observed.
Primary intervals are reported as drill core length, with true widths estimated to be approximately 80 – 90% of core lengths, based on the sub-horizontal to shallow-dipping nature of the modelled mineralized zones.
Mineral Resource Estimate Details
The following table summarizes the current Minto Mineral Resource Estimate:
Table 4: Global Mineral Resource Estimate for the Minto Project (Effective Date: June 10, 2026)
| Type | Cut | Class | ROM | In Situ Grade | Metal | |||||||||||||||||||||
| (CDN$) | Tonnage (000) | NSR (CDN$) |
Cu (%) |
Au (gpt) |
Ag (gpt) |
Ox Ratio |
ASCu (%) |
Cu (Mlbs) |
Au (Koz) |
Ag (Koz) |
||||||||||||||||
| OP | $30 | Indicated | 21,779 | $80.63 | 0.59 | 0.17 | 1.8 | 0.11 | 0.073 | 283 | 122 | 1,294 | ||||||||||||||
| Inferred | 7,052 | $74.61 | 0.55 | 0.13 | 1.6 | 0.08 | 0.048 | 85 | 30 | 354 | ||||||||||||||||
| UG | $80 | Measured | 348 | $153.47 | 0.92 | 0. | .3 | 0.05 | 0.041 | 7 | 4 | 36 | ||||||||||||||
| Indicated | 25,679 | $189.20 | 1.15 | 0.49 | 4.4 | 0.06 | 0.067 | 650 | 404 | 3,638 | ||||||||||||||||
| Inferred | 9,812 | $146.57 | 0.91 | 0.36 | 3.5 | 0.05 | 0.044 | 196 | 112 | 1,113 | ||||||||||||||||
| Total | Varies as Above | Measured + Indicated | 47,806 | $139.48 | 0.89 | 0.34 | 3.2 | 0.08 | 0.070 | 940 | 530 | 4,969 | ||||||||||||||
| Inferred | 16,865 | $116.48 | 0.76 | 0.26 | 2.7 | 0.06 | 0.046 | 281 | 142 | 1,467 | ||||||||||||||||
| Notes |
|
|||||||||||||||||||||||||
References
1 See 2026-09-14 Technical Report “NI 43-101 2026 Mineral Resource Estimate Update for the Minto Property, Yukon, Canada” effective date 2026-06-10 filed by Selkirk Copper Mines Inc., available on SEDAR+ (sedarplus.ca).
Technical aspects of this news release have been reviewed, verified and approved by Leif Bailey, P.Geo., Director of Geoscience & Exploration of Selkirk Copper Mines Inc., who is a qualified person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.
About Selkirk First Nation
Selkirk First Nation is centered in Pelly Crossing, a community in central Yukon, 280 km north of Whitehorse. They are a self-governing First Nation, having signed its Final and Self-Government Agreements in 1997. Selkirk First Nation owns 4,740 square kilometers of Settlement Land, including 2,408 square kilometers where they own both the surface and subsurface. Selkirk First Nation is one of three self-governing Northern Tutchone First Nations in the Yukon. The Selkirk First Nation, indirectly, holds a controlling equity stake in Selkirk Copper.
About Selkirk Copper
Selkirk Copper is a well-financed, newly formed company with a controlling interest held by the Selkirk First Nation through its wholly owned subsidiary, that, in partnership with the Selkirk First Nation, is completing a thorough exploration drilling campaign and a restart and redevelopment plan for the former Minto copper-gold-silver mine based on best-in-class environmentally sustainable mining, development and reclamation practice. Selkirk Copper controls 26,850 hectares of prospective mineral claims located in the Minto-Carmacks copper belt as well as significant open-pit and underground infrastructure, a 4,100 tonne per day processing plant, 400-person full-rotation camp, water treatment facilities, numerous ancillary buildings, and mobile equipment centered on the former Minto copper-gold-silver mine. Selkirk Copper’s mineral tenure, operation infrastructure, access roads, and powerline is located on or adjacent to Lands of the Selkirk First Nation much of which is surrounded by prospective Selkirk First Nation Category A Lands.
Yukon Metals Corp. (CSE: YMC) (FSE: E770) (OTCQB: YMMCF) is pleas... READ MORE
Aben Gold Corp. (TSX-V: ABM) (OTCID: ABNAF) (Frankfurt: ML1) i... READ MORE
HIGHLIGHTS Sigma Lithium closes previously announced US$125M, 5-y... READ MORE
Mining Americas Inc. (TSX: MAI) (OTCQX: MAIFF) is pleased to anno... READ MORE