The Prospector News

Red Pine Intersects 68.71g/t gold over 4.72m including 231.5 g/t Gold over 1.06m in extension of the Minto Mine South Deposit. Visible Gold Intersected South of the Parkhill Fault.

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Red Pine Intersects 68.71g/t gold over 4.72m including 231.5 g/t Gold over 1.06m in extension of the Minto Mine South Deposit. Visible Gold Intersected South of the Parkhill Fault.

 

 

 

 

 

Red Pine Exploration Inc. (TSX-V: RPX) (OTCQB: RDEXF) is pleased to report on new results from its 2022 Phase 1 exploration program. Red Pine drilling has intersected high-grade gold mineralization in the Minto Mine Shear Zone. We have confirmed gold mineralization in the extension of the Jubilee Shear south of the Parkhill Fault adding over 2.5kms in strike length of known continuous gold mineralization to the Wawa Gold Corridor.

 

“We know that the historic high grade mines; Minto, Parkhill and Darwin Grace; have produced spectacular gold intersections throughout their operational history and it is understandable that we are now intersecting similar high-grade as we work to expand our resources into these areas. Red Pine is making excellent progress as we expand the footprint of our current resource,” – Quentin Yarie, President and CEO of Red Pine Exploration.

 

High-grade gold in the Minto Mine Deposit

 

As part of its on-going drilling in the Surluga South exploration target, Red Pine is testing strategic gaps in the resource of the Minto Mine Deposit. In hole SD-22-373, located within an approximately 25 meters-wide gap in the current resource of the Minto Deposit, we discovered additional high-grade gold mineralization in the Minto Mine shear zone. The results from SD-22-373, combined with those of SD-21-298A (announced September 2, 2021), indicate that the Minto Mine deposit has the potential to host zones of high-grade gold mineralization.

 

Table 1 – Minto Mine Shear Zone (refer to Figure1)

 

Hole From (m) To          (m) Length (m)* Est. True Width (m) Visible Gold Gold (g/t) Zone
SD-22-373 147.49 148.50 1.01   Yes 17.68 Minto Stockwork
159.45 164.17 4.72 3.45 Yes 68.71 Minto Mine Shear Zone
Including      
161.15 162.10 0.95 0.69 Yes 80.80
162.10 163.16 1.06 0.77 Yes 231.5

 

Figure 1 – Minto Mine South Cross Section.

 

Discovery of gold mineralization in the Jubilee Shear Zone south of the Parkhill Fault – Figure 2

 

“As we continue to focus on the expansion of the Surluga and Minto Mine South resources, a third drill has been conducting further regional exploration of the property, particularly south of the Parkhill Fault (Figure xx). We have successfully demonstrated that a large orogenic gold system exists at the Wawa Gold Project now extending over a >6km strike length. Gold mineralization exists across multiple structures south of the Parkhill fault and we will now utilize what we have learned from the Surluga resource to identify zones of material gold grades and thicknesses. As an example, visible gold has been intersected in the Jubilee shear south of the Parkhill fault in hole JS-22-368 proving our teams understanding of this large gold system (assays pending),” – Quentin Yarie, President and CEO of Red Pine Exploration.

 

Figure 2 – Plan Map Of Wawa Gold Corridor – Extending the Jubilee Shear.

 

Further Exploration Results

 

Red Pine’s drilling confirmed the presence of gold mineralization in some of the deformation domains that are forming the Jubilee Shear Zone south of the Parkhill fault thereby opening this underexplored segment of the structure for additional exploration (Table 2).

 

Table 2– Jubilee Shear Zone south of the Parkhill Fault (refer to Figure 2)

 

Hole From (m) To

(m)

Length (m)* Est. True Width (m) Visible Gold Gold (g/t) Zone
JS-22-359 233.32 234.45 1.13     3.14 Jubilee Shear System
296.78 297.63 0.85     1.16

* Assay results presented over core length are estimated to represent over 75% true width

 

Darwin Grace-Nyman Gold System: Confirmation of mineralization in the Grace Shear Zone 300 meters south of the vertical shaft of the Darwin-Grace Mine

 

In the Darwin-Grace area, hole DG-22-349 extends gold mineralization in the Grace Shear Zone 300 m southeast of the vertical shaft of the Darwin-Grace Mine (Table 3). Being the southernmost drill hole ever completed in the Grace Shear Zone, DG-22-349 shows that mineralization in the Grace Shear System remains open to the south. Red Pine’s 2022 Phase 1 exploration program has confirmed the presence of gold mineralization along the Grace Shear Zone over a total strike length of 650 meters (announced March 16th, 2022).

 

Table 3 – Expansion of gold mineralization in the Darwin-Grace mineralized system*

 

Hole From (m) To          (m) Length (m)* Visible Gold Gold (g/t) Zone
DG-22-334 135.51 136.60 1.09   1.22 Nyman
DG-22-336 NSR  
DG-22-344A 322.34 323.66 1.32   1.25 EW vein
DG-22-347 NSR  
DG-22-349 24.41 26.09 1.68   4.53 Grace Shear Zone – Upper Segment
51.26 53.18 1.92   0.48 Grace Shear Zone – Lower Segment
DG-22-353 82.57 83.73 1.16   1.48 Nyman Shear Zone
DG-22-354 90.81 92.40 1.59   0.79 Nyman Shear Zone

Assay results presented over core length and are estimated to represent > 75% true width in the Grace Shear Zone and the Nyman Shear Zone.

 

Surluga North Vein Network

 

Hole SD-22-352 and SD-22-330 extended the footprints of the Surluga North Vein Network (Table 4). The intersection in SD-22-352 is located 120 meters east of the intersection of the Surluga North Vein network in SD-22-326 (refer to press release dated April 19th, 2022).

 

Table 4 – Surluga North Vein Network above the Jubilee Shear Zone*

 

Hole From (m) To
(m)
Length (m)* Visible Gold Gold (g/t) Zone
SD-22-330 246.52 247.57 1.05   4.14 Surluga North – Quartz vein network
SD-22-352 227.44 228.36 0.92 Yes 13.2
246.13 247.34 1.21   0.90

Assay results presented over core length and are estimated to represent > 35% true width in the Surluga North Vein Network.

 

Jubilee Shear Zone

 

Drilling in the Surluga South and the Surluga North zones in the Jubilee Shear Zone demonstrate that the structure and gold mineralization are persisting at depth (Table 5).

 

Table 5 – Jubilee Shear Zone (refer to Figure 2)

 

Hole From (m) To
(m)
Length (m)* Visible Gold Gold (g/t) Zone
SD-22-330 332.06 333.02 0.96   1.01 Jubilee Shear Zone – Surluga North
355.85 357.79 1.94   1.19
SD-22-331B 691.91 693.38 1.47   1.04 Jubilee Shear Zone – Surluga South
746.79 747.73 0.94   1.30
752.21 754.71 2.50   0.99
761.36 762.36 1.00   1.05
767.00 768.00 1.00   3.21
793.36 795.46 2.10   1.66
SD-22-332 271.00 274.90 3.90 Yes 0.51 Jubilee Shear Zone – Surluga North
SD-22-352 351.00 352.12 1.12   1.36

Assay results presented over core length and are estimated to represent > 75% true width in the Jubilee Shear Zone.

 

Quality Assurance/Quality Control Measures

 

Drill core samples were transported in security sealed bags for analyses at Actlabs in Ancaster, Ontario. Individual samples were labelled, placed in plastic sample bags and sealed. Groups of samples were then placed into durable rice bags and then shipped. The residual coarse reject portions of the samples remain in storage if further work or verification is needed.

 

Red Pine has implemented a quality-control program to comply with best practices in the sampling and analysis of drill core. As part of its QA/QC program, Red Pine inserts external gold standards (low to high grade) and blanks every 20 samples in addition to random standards, blanks, and duplicates.

 

Qualified Person

 

Quentin Yarie, P.Geo. and Chief Executive Officer of Red Pine and the Qualified Person, as defined by National Instrument 43-101, has reviewed, and approved the news release’s technical information.

 

COVID-19 Precautions

 

Red Pine has developed and implemented compliant precautions and procedures according to guidelines for the Province of Ontario. Protocols were put in place to ensure our employees’ and contractors’ safety, thereby reducing the potential for community contact and spreading of the virus.

 

About Red Pine Exploration Inc.

 

Red Pine Exploration Inc. is a gold exploration company headquartered in Toronto, Ontario, Canada. The Wawa Gold Project is in the Michipicoten Greenstone Belt of Ontario, a region that has seen major investment by several producers in the last five years. Its land package hosts numerous historic gold mines and is over 6,900 hectares in size. The Company’s Chairman of the Board is Paul Martin, the former CEO of Detour Gold. The Board has extensive and diverse experience at such entities as Alamos, Barrick, Generation Mining, Detour Gold and Paramount Gold Nevada Corp. Led by Quentin Yarie, CEO, who has over 25 years of experience in mineral exploration, Red Pine is strengthening its position as a major mineral exploration and development player in the Michipicoten region.

 

Posted July 14, 2022

Share this news article

MORE or "UNCATEGORIZED"


Maple Gold Reports Douay Drill Results from H1 2022 Drilling

Maple Gold Mines Ltd. (TSX-V: MGM) (OTCQB: MGMLF) (FSE: M3G) rep... READ MORE

December 1, 2022

RIVERSIDE RESOURCES RECEIVES US$2,500,000 IN CASH AND RETAINS 2% NSR ROYALTY FOR THE SALE OF THE TAJITOS GOLD PROJECT TO FRESNILLO PLC

Riverside Resources Inc. (TSX-V: RRI) (OTCQB: RVSDF) (FSE: 5YY) ... READ MORE

December 1, 2022

SITKA DRILLS 180.0 METRES OF 1.04 G/T GOLD WITHIN 305.2 METRES OF 0.78 G/T GOLD AT ITS RC GOLD PROJECT, YUKON

Sitka Gold Corp. (CSE: SIG) (FSE: 1RF) (OTCQB: SITKF) is pleased ... READ MORE

December 1, 2022

Power Metals Intersects 20.25 % cesium over 1.0m and 3.10% lithium over 2.0m at Case Lake

Power Metals Corp.  (TSX-V: PWM) (FRA:OAA1) (OTCQB:PWRMF) is ple... READ MORE

December 1, 2022

G2 Goldfields Drills 50m @ 1.71 g/t Au in New Zone & Trenches 36m wide Stockwork with V.G.

G2 Goldfields Inc.  (TSX-V: GTWO) (OTCQX: GUYGF) announces that... READ MORE

December 1, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News