The Prospector News

Red Pine Intercepts Significant Mineralization at the Wawa Gold Project, including 3.10 g/t gold over 16.61 m including 40.20 g/t gold over 1.00 m

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Red Pine Intercepts Significant Mineralization at the Wawa Gold Project, including 3.10 g/t gold over 16.61 m including 40.20 g/t gold over 1.00 m

 

 

 

 

 

Red Pine Exploration Inc. (TSX-V: RPX) (OTCQB: RDEXF) is pleased to announce the most recent assay results from 8 drill holes representing 1,881.40 metres of assayed drill core from the 2022-2024 resource expansion program at the Wawa Gold Project.

 

Since the resource expansion drilling program began in 2021, and with final compilation of the drilling assay database and geological domaining, an additional 60,000 m of drill core from 177 drill holes, distributed in 47,600 assay samples, will be considered for the upcoming mineral resource update with an effective database cut-off date of June 21, 2024.

 

In addition, the Company has 5,000 m of drill core distributed in 22 drill holes from the current drill program for which assays are pending and expects additional drilling results to follow over the coming months which will be reported, but not included, in the updated mineral resource estimate.

 

Drilling Highlights (Tables 1-3, Figures 1-3):

  • 3.10 grams per tonne gold over 16.61 m, including 40.20 g/t gold over 1.00 m in SD-24-520
  • 65.60 g/t gold over 1.12 m and 4.00 g/t gold over 2.20 m, including 7.47 g/t gold over 1.10 m in SD-24-521
  • 2.43 g/t gold over 18.19 m, including 6.15 g/t gold over 1.26 m and 9.70 g/t gold over 2.75 m in SD-24-506
  • 2.02 g/t gold over 8.39 m, including 4.66 g/t gold over 2.40 m in SD-24-508
  • Multiple intersections in the hanging wall of the Jubilee Shear in SD-24-521 that include 0.65 g/t gold over 5.42 m, 0.71 g/t gold over 4.11 m and 0.75 g/t gold over 2.55 m in shear zones and vein networks.

 

Paul Martin, Interim CEO and Chair of the Board of Red Pine commented: “The latest drill results continue to attest to the existence of significant mineralization in the Jubilee Shear, outside the limits of the former underground mineral resource1. Zones of near surface gold mineralization in the hanging wall of the Jubilee Shear continue to be intersected and are expected to contribute to reducing the stripping ratio under any proposed open pit scenario.”

 

This news release contains the last assay results that will be considered in the upcoming mineral resource estimation for the Wawa Gold Project. We would like to acknowledge the work of Red Pine’s team in Wawa and of Actlabs for enabling the rapid turnaround of drilling assay results, which allows for the inclusion of an increased number of samples in the accelerated and upcoming mineral resource estimation.”

 

Discussion of Drill Results

 

In the Jubilee Shear System, the results of the exploration program indicate:

  • Significant mineralization remains outside the mined areas of the historical Jubilee Mine and in shear zones below the Jubilee Shear
  • Gold mineralization remains opens at depth in the Jubilee Shear down-dip and down-plunge of the existing mineral resource
  • Gold mineralization extends to surface beyond the northern extent of the existing mineral resource

 

In the hanging wall of the Jubilee Shear, the new results:

  • indicate the presence of sheared vein networks above the Jubilee Shear
  • Extend mineralization in shear zones above the Jubilee Shear

 

Quality Assurance/Quality Control Measures

 

Improvements have been added to the Company’s QA/QC protocols under the direction of the recently appointed new Chair of the Technical Committee and the incoming President and Chief Executive Officer.

 

Drill core samples are transported in security sealed bags for analyses to Actlabs in Ancaster, Ontario. Individual samples are labelled, placed in plastic sample bags and sealed. Groups of samples are then placed into durable rice bags and shipped. HQ core assays were obtained 50-gram fire-assaying-AA finish or by 1-kilogram screen fire assay. The 1-kilogram screen assay method is selected for samples anticipated to contain coarse gold and for all the samples with results greater or equal to 2.25 g/t gold for fire-assaying with a AA finish. The residual coarse reject portions of the samples remain in storage for a period if further work or verification is needed.

 

As part of its updated and independently reviewed QA/QC program, Red Pine inserts external gold standards (low to high grade) and blanks every 20 samples, and routinely insert blanks immediately after samples with visible gold. Quarter core duplicates are routinely inserted to evaluate the natural variability of gold mineralization. Assay certificates are sent to at least two members of the senior management team, and they are directly accessible from the WebLIMS portal of Actlabs.

 

Table 1 – In and below the Jubilee Shear System (Figures 1 to 3)

Hole From To Length Gold Zone
(#)  (m)  (m) (m)*  (g/t)  (name) 
SD-24-506 260.43 278.62 18.19 2.43 Jubilee Shear
Including 260.43 261.69 1.26 6.15  
and 264.12 266.87 2.75 9.70  
SD-24-508 230.96 239.35 8.39 2.02 Jubilee Shear
Including 230.96 233.36 2.40 4.66  
  243.33 244.78 1.47 1.97  
  263.53 268.29 4.76 0.83  
  330.88 331.90 1.02 5.89 Below Jubilee Shear
  338.63 339.69 1.06 1.43  
SD-24-509A 156.27 163.92 7.65 0.74 Jubilee Shear
Including 161.16 162.45 1.29 2.73  
  171.35 172.57 1.22 1.08  
SD-24-510 151.57 152.59 1.02 0.93 Jubilee Shear
  157.10 160.4 3.30 0.45  
SD-24-520 126.43 143.15 16.61 3.10 Jubilee Shear
Including 142.15 143.15 1.00 40.20  
  231.32 232.32 1.00 1.17 Below Jubilee Shear
SD-24-521 78.60 80.80 2.20 4.00 Jubilee Shear
Including 79.70 80.80 1.10 7.47  
  97.60 99.00 1.40 1.47  
  112.45 113.57 1.12 65.60  
  212.86 214.05 1.19 8.18 Below Jubilee Shear

*Intercepts are calculated using a 0.40 g/t gold cut-off and a maximum of 5 m of internal dilution with no capping applied and are reported over core lengths. True width is estimated to vary between 75 to 95% of the reported core length.

 

Table 2 – Hanging wall of the Jubilee Shear (Figures 1 to 3)

Hole From To Length Gold Zone
(#)  (m)  (m) (m)*  (g/t)  (name) 
SD-22-382 290.41 291.89 1.48 0.57 Shear Zone and Vein Network
SD-24-503A 30.47 34.15 3.68 0.56 Shear Zone and Vein Network
  50.40 51.60 1.20 0.57 Shear Zone
  136.80 138.10 1.30 1.91 Shear Zone
SD-24-521 8.72 14.14 5.42 0.65 Vein Network
  51.35 55.46 4.11 0.71 Shear Zone and Vein Network
  59.30 61.85 2.55 0.75

*Intercepts are calculated using a 0.40 g/t gold cut-off grade and a maximum of 5 m of internal dilution with no capping applied and are reported over core lengths. True width is estimated to vary between 20 to 90% of the reported core length depending on the mineralization types defining the intersected gold zones.

 

Table 3 – Drill hole location

Hole (#)  UTM E UTM N Elevation Azimuth (°) Dip (°) Length (m)
SD-22-382 668750 5317240 393.2 297.0 -73.5 422
SD-24-503A 668584 5316354 380.6 329.7 -58.5 465
SD-24-506 668438 5316411 376.4 335.5 -47.6 384
SD-24-508 668444 5316407 376.8 313.0 -47.1 381
SD-24-509A 668107 5316106 379.6 321.0 -72.3 279
SD-24-510 668106 5316106 379.6 321.0 -45.3 291
SD-24-520 668225 5316466 379.3 310.9 -62.7 258
SD-24-521 668207 5316532 379.4 315.0 -61.2 222

Qualified Person

 

Jean-Francois Montreuil, P.Geo. and Vice President, Exploration of Red Pine and the Qualified Person, as defined by National Instrument 43-101, has reviewed and approved the technical information contained in this news release.

 

About Red Pine Exploration Inc.

 

Red Pine Exploration Inc. is a gold exploration company headquartered in Toronto, Ontario, Canada. The Wawa Gold Project is in the Michipicoten Greenstone Belt of Ontario, a region that has seen major investment by several producers in the last five years. Its land package hosts numerous historic gold mines and is over 7000 hectares in size. Red Pine is building a strong position as a major mineral exploration and development player in the Michipicoten region.

 

Figure 1 – Location of Diamond Drilling Results

Figure 2- 3D View of Diamond Drilling Results

 

Figure 3 – Section view of Diamond Drilling Results within and around the Jubilee Shear Zone

 

Posted June 27, 2024

Share this news article

MORE or "UNCATEGORIZED"


G Mining Ventures Announces Closing of Private Placements and Receipt of Final Order for Arrangement with Reunion Gold

All amounts are in USD unless stated otherwise $50 million privat... READ MORE

July 12, 2024

SilverCrest Provides Second Quarter Operational Results

Record Revenue, Treasury Assets Increased by 34% During the Quart... READ MORE

July 12, 2024

New Found Intercepts Nine New Gold Zones Spanning 3km in Strike, Doubles Known Vertical Extent of Gold Mineralization to 820m Depth at Queensway

New Found Gold Corp. (TSX-V: NFG) (NYSE-A: NFGC) is pleased to a... READ MORE

July 11, 2024

Kobo Resources Reports Significant Gold Intersections at its Kossou Gold Project With 9.0 Metres at 23.89 g/t Au, Including 1.0 Metre at 210.00 g/t Au and 9.0 Metres at 4.27 g/t Au

Completion of First Diamond Drill Program with 25 Holes (4,368 m)... READ MORE

July 11, 2024

International Battery Metals (IBAT) Commences Operations of World's First Commercial Modular Direct Lithium Extraction (DLE) Plant and First Commercial DLE Plant in North America

Industry-disrupting technology breakthrough vaults IBAT to global... READ MORE

July 11, 2024

Copyright 2024 The Prospector News