Nuvau Minerals Inc. (TSX-V: NMC) is pleased to report additional assay results from its 2026 summer drilling program at Thundermine (also called Thunderwood) in Matagami, Québec. Hole TH-26-11, located approximately 50 metres shallower than TH-26-08, intersected 17.37 g/t gold over 2.40 metres within a broad mineralized interval. The new intersection provides an additional pierce point between TH-26-08 and historical drilling, further supporting continuity of the mineralized system.

Highlights of drill results:

• 17.37 g/t Au over 2.40 metres in TH-26-11, within a broader 165-metre interval averaging 0.37 g/t Au characterized by variable densities of mineralized veins.
• TH-26-11 is located approximately 50 metres shallower than TH-26-08, which intersected 138.9 g/t Au over 4.4 metres, and halfway toward historical drilling, adding another mineralized pierce point to the system.
• Every Nuvau summer drillhole assayed to date has returned gold mineralization, with six additional holes pending and the system remaining open.

“TH-26-11 is a 50-metre step-out from TH-26-08 and demonstrates continuity of the system,” said Christina McCarthy, Nuvau’s Chief Executive Officer. “The hole returned 17.37 g/t Au over 2.40 metres within a 165-metre mineralized interval, in the same altered tonalitic host and quartz-tourmaline vein array intersected throughout the program. Remember, this Thundermine property has not been systematically tested for over 40 years, and orogenic systems of this style in the Abitibi are known for their significant vertical persistence. Thundermine remains open along the interpreted trend to the southeast, as shown in our previously announced diagrams¹, and at depth, with assays from six holes still pending.”

Figure 1: Quartz-tourmaline veining with pyrite, visible gold, and associated alteration haloes.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11236/314711_a6bcab33d4eb8b86_001full.jpg

Mineralization Continues at Thundermine

TH-26-11 intersected the same altered tonalitic intrusive and quartz-tourmaline vein system observed throughout Nuvau’s drilling at Thundermine. Gold grades and vein density vary considerably through the intrusive, with discrete higher-grade veins occurring within broader zones of lower-grade veinlet and associated disseminated mineralization. These results remain consistent with Nuvau’s interpretation of a Val d’Or-analogue orogenic gold system developed within a fractured intrusive host. The Thundermine system remains open along the interpreted trend and at depth.

Figure 2: Cross section C at Thundermine, looking northwest (60 m projection window), showing TH-26-11 relative to recent and historical drilling. See previous press release¹ for a plan view of DDH location.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11236/314711_a6bcab33d4eb8b86_002full.jpg

Table 1: Selected TH-26-11 assays above 1 g/t Au and composite of the main mineralized interval in the Tonalitic intrusive (vein density varies within the composites).

Table 2: Drillhole locations.

Note: In all figures and tables, reported intervals are core lengths; true widths are unknown. Composite grades are length-weighted, with unsampled intervals and assays below detection assigned 0 g/t Au. Mineralization also occurs outside the reported composite intervals.

Quality Assurance, Quality Control, and Data Verification
Drill core is logged, photographed, sawn in half, and sampled at Nuvau Minerals’ secure core facility. One half of the core is submitted for analysis, and the remaining half is retained on site for reference. Samples are sealed in individually labelled plastic bags and transported under chain-of-custody procedures to MSALABS in Val-d’Or, Québec, an independent ISO/IEC 17025-accredited laboratory.

Samples are dried, crushed to achieve approximately 70% passing 2 mm, and prepared for analysis. Gold assays are completed using PhotonAssay™ technology on a nominal 500 g aliquot. The Company’s quality assurance and quality control program includes certified reference materials, blanks and duplicate samples, representing approximately 11% of all submitted samples. Additional QA/QC samples are inserted at intervals that contain visible mineralization. MSALABS also applies its internal quality control procedures in accordance with its accredited analytical protocols.

Analytical results are reviewed through a comprehensive QA/QC verification process, including the evaluation of standards, blanks, and duplicate samples. Reanalysis is conducted systematically where QA/QC criteria are not met. The Qualified Person reviews the analytical results, QA/QC data, and verification procedures disclosed herein and considers the results to be reliable and suitable for reporting.

Qualified Person
The scientific and technical information contained in this news release has been reviewed and approved by Bastien Fresia, P. Geo. (Qc), Director of Technical Services and a “qualified person” for the purposes of National Instrument 43-101.

For further information, please contact:
Christina McCarthy
Chief Executive Officer, Nuvau Minerals
cmccarthy@nuvauminerals.com | 416-712-6151

About Nuvau
Nuvau Minerals (TSX-V: NMC) is a Canadian mining and exploration company advancing a historic mining camp toward a production restart while generating new critical metal and gold discoveries. Its flagship asset is the past-producing Matagami mining district in northern Québec. Nuvau controls a 1,380-square-kilometre land package and benefits from access to permitted mining infrastructure, including an option on a 3,000 tpd concentrator. The Company’s strategy is to combine district-scale exploration targeting zinc-copper VMS deposits and newly recognized gold potential with resource growth and project development.