The Prospector News

NexGold Reports Additional Broad, High-Grade Gold, Drill Intercepts at Goldlund, Supporting Mineral Resource Continuity and Expansion Potential

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

NexGold Reports Additional Broad, High-Grade Gold, Drill Intercepts at Goldlund, Supporting Mineral Resource Continuity and Expansion Potential

NexGold Mining Corp. (TSX-V: NEXG) (OTCQX: NXGCF) is pleased to provide additional positive results from the ongoing diamond drilling program at the Company’s Goliath Gold Complex in northwestern Ontario, which includes the Goliath, Goldlund, and Miller Deposits. The drill program, of which approximately 19,000 metres have been completed of the planned 25,000 metres, is focused on infilling and potentially expanding open pit Mineral Resources at the Goldlund Deposit. The results presented in this news release include 5,816 metres of diamond drilling in 14 drill holes (GL-26-006 to GL-26-008 and GL-26-010 to GL-26-019B). These drill holes infill and expand mineralization in Zone 4 of the Goldlund Deposit from near the centre to the northeastern end of the open pit Mineral Resource (Figures 1, 2 and 3; Tables 1 and 2).

Selected intercepts from diamond drill holes at the Goldlund Deposit in this news release are further detailed in Table 1 and include:

  • 15.21 g/t gold over 20.1 metres (from 386.2 to 406.3 metres), including 497.00 g/t gold over 0.5 metres and 50.10 g/t gold over 1.0 metre, in drill hole GL-26-007; additionally, 3.55 g/t gold over 6.0 metres (from 370.0 to 376.0 metres), including 8.98 g/t gold over 1.0 metre, 5.39 g/t gold over 1.0 metre, and 4.50 g/t gold over 1.0 metres was intersected in the same hole;
  • 5.11 g/t gold over 21.8 metres (from 351.6 to 373.4 metres), including 159.00 g/t gold over 0.5 metres and 13.40 g/t gold over 0.6 metres in drill hole GL-26-014;
  • 4.51 g/t gold over 21.9 metres (from 244.5 to 266.4 metres), including 134.00 g/t gold over 0.6 metres, 10.40 g/t gold over 1.0 metre, and 6.76 g/t gold over 0.5 metres in drill hole GL-26-012;
  • 2.12 g/t gold over 16.0 metres (from 379.0 to 395.0 metres), including 27.30 g/t gold over 1.0 metres in drill hole GL-26-016; and
  • 1.34 g/t gold over 30.0 metres (from 258.0 to 288.0 metres), including 13.13 g/t gold over 0.7 metres and 7.38 g/t gold over 0.9 metres in drill hole GL-26-011.

These drill results are in the same general area of Zone 4 mineralization where previously reported drill intersections were announced (see NexGold news release dated February 2, 2026) and included:

  • 3.31 g/t gold over 20.0 metres (from 279.0 to 299.0 metres), including 71.69 g/t gold over 0.7 metres and 3.89 g/t gold over 1.0 metre in drill hole GL-25-003; and
  • 7.59 g/t gold over 9.0 metres (from 345.5 to 354.5 metres), including 104.00 g/t gold over 0.5 metres and 5.64 g/t gold over 1.0 metres in drill hole GL-25-002. 

Kevin Bullock, President and CEO of NexGold, commented: Our infill drilling program at the Goliath Gold Complex (Goldlund Deposit) continues to deliver positive results, supporting the interpretation of mineralized continuity within Zone 4, including at depths approaching the base of the current open pit Mineral Resource. The Goliath Gold Complex represents an important pipeline project for NexGold to look to develop following the successful construction of our Goldboro Gold Project in Nova Scotia. The results to date at Goldlund are expected to contribute valuable data to support the potential upgrading of Mineral Resource classifications at the Goldlund Deposit and to inform ongoing mine planning and optimization studies for the Goliath Gold Complex. The drill program is ongoing, with more than 75% of the planned work completed, and we look forward to updating the market with additional results.”

Mineralization at the Goldlund Deposit is generally characterized by quartz stockwork veining within sub-vertical granodiorite sills. Zone 4 at the Goldlund Deposit includes broad intervals of mineralized intermediate-mafic volcanic rocks with multiple porphyry and granodiorite intrusions. The drill results summarized in this news release, together with previously announced drill results, provide additional support and information relevant to the interpretation of grade continuity within Zone 4. These results are expected to contribute to ongoing refinement of the geological model and may support future evaluation of Mineral Resource classification, subject to additional drilling, data verification, and completion of further technical studies.

Drill holes designed throughout this program have been distributed across the strike of Zone 4 with holes highlighted in this release located toward the northeast end of the zone. Mineralization found in these holes show the continuity down dip and along strike to previously reported drill holes GL-25-003 and GL-25-002, which intersected 3.31 g/t gold over 20.0 metres and 7.59 g/t gold over 9.0 metres respectively (see NexGold news release dated February 2, 2026). Gold intersected in these holes further demonstrates the continuity of mineralization and the potential for Mineral Resource expansion in Zone 4 as additional targets are drilled along strike and down dip.

Figure 1: Plan map showing the location of the Goldlund Zone 4 infill drill holes.

 

 

Figure 2: Cross-section through the Goldlund Deposit, showing the location of the drill holes (GL-26-006, GL-26-007, GL-26-010, GL-26-012 and GL-26-013) reported in this news release (red cylinders show highlighted intervals).

 

 

Figure 3: Cross-section through the Goldlund Deposit, showing the location of the drill holes (GL-26-010, GL-26-011, GL-26-013, GL-26-014, GL-26-016, and GL-26-018) reported in this news release (red cylinders show highlighted intervals).

 

 

Table 1: Highlighted drill intercepts from drill holes in this news release.

 

Drill Hole ID Target/Zone From (m) To (m) Interval (m) Au g/t
GL-26-006 Zone 4 318.0 321.0 3.0 3.20
including 320.0 321.0 1.0 9.25
and Zone 4 356.9 363.6 6.7 1.19
including 359.2 360.0 0.8 3.62
and including 361.5 362.0 0.5 5.78
GL-26-007 Zone 4 370.0 376.0 6.0 3.55
including 371.0 372.0 1.0 4.50
and including 372.0 373.0 1.0 8.98
and including 375.0 376.0 1.0 5.39
and Zone 4 386.2 406.3 20.1 15.21
including 394.0 394.5 0.5 497.00
and including 405.3 406.3 1.0 50.10
GL-26-008 Zone 4 354.0 363.0 9.0 4.67
including 354.6 355.5 0.9 38.35
and Zone 4 373.0 379.0 6.0 1.56
including 377.0 378.0 1.0 6.89
GL-26-010 Zone 4 181.3 199.5 18.2 1.83
including 181.3 181.9 0.6 23.30
and including 182.5 183.5 1.0 4.86
and Zone 4 211.2 219.0 7.8 4.67
including 215.0 216.0 1.0 31.1
GL-26-011 Zone 4 258.0 288.0 30.0 1.34
including 272.1 272.8 0.7 13.13
and including 283.7 284.6 0.9 7.38
GL-26-012 Zone 4 228.3 231.1 2.8 3.40
including 228.3 230.0 1.7 4.84
and Zone 4 244.5 266.4 21.9 4.51
including 251.5 252.5 1.0 10.40
and including 252.5 253.0 0.5 6.76
and including 265.2 265.8 0.6 134.00
GL-26-013 Zone 4 275.0 276.0 1.0 33.60
and Zone 4 294.0 295.0 1.0 7.87
and Zone 4 300.3 315.5 15.2 1.41
including 301.3 302.1 0.8 13.05
and including 302.1 302.6 0.5 4.73
and Zone 4 328.5 330.0 1.5 6.53
including 329.1 330.0 0.9 10.50
GL-26-014 Zone 4 351.6 373.4 21.8 5.11
including 351.6 352.2 0.6 13.4
and including 373.0 373.5 0.5 159.0
GL-26-015 Zone 4 328.5 339.9 11.4 2.00
including 329.5 330.5 1.0 4.25
and including 336.5 337.1 0.6 4.35
and Zone 4 357.0 363.0 6.0 1.75
including 362.0 363.0 1.0 6.99
GL-26-016 Zone 4 379.0 395.0 16.0 2.12
including 385.0 386.0 1.0 27.30
GL-26-017 Zone 4 331.0 335.0 4.0 1.07
including 332.0 333.0 1.0 2.18
GL-26-018 Zone 20 19.0 33.0 14.0 0.63
including 31.5 33.0 1.5 1.74
and Zone 4 272.6 297.7 25.1 1.00
including 288.8 289.5 0.7 3.70
and Zone 4 310.9 311.4 0.5 31.60
GL-26-019 Zone 20 116.0 125.0 9.0 0.67
including 116.0 116.7 0.7 3.39
GL-26-019B Zone 20 112.5 123.0 10.5 0.43
including 122.0 123.0 1.0 2.46
and Zone 4 346.6 352.8 6.2 0.95
including 352.0 352.8 0.8 4.47

Notes:

  1. Reported intervals are drilled core lengths and do not indicate true widths. True widths vary from 50 to 75% of the interval length.
  2. For duplicate samples, an average was used to calculate the intersection grade. All grades are uncapped.
  3. Drill holes GL-25-001 to 019, GL-26-001 to 005 and GL-26-009 were reported in previous news releases dated February 2, February 25, April 10 and May 6, 2026.


Table 2:
Locations and orientations of drill holes in the news release.

 

Drill Hole ID Easting Northing Elevation (m) Length (m) Azimuth Inclination
GL-26-006 547102 5527917 412 465 131 -45
GL-26-007 547102 5527917 412 501 129 -50
GL-26-008 547102 5527917 412 501 139 -50
GL-26-010 547281 5527828 422 276 120 -45
GL-26-011 547265 5527869 422 375 118 -49
GL-26-012 547199 5527827 424 375 122 -52
GL-26-013 547220 5527920 417 402 125 -48
GL-26-014 547220 5527920 417 426 121 -56
GL-26-015 547240 5527920 421 450 118 -48
GL-26-016 547240 5527920 421 507 115 -54
GL-26-017 547300 5527900 421 477 116 -55
GL-26-018 547300 5527900 421 402 118 -49
GL-26-019 547305 5527940 421 219 118 -49
GL-26-019B 547305 5527940 421 440 118 -49

Note: Drill hole locations reported as Universal Transverse Mercator NAD83 Zone 15N coordinates


QA/QC

The Company has implemented a quality assurance and quality control program to ensure sampling and analysis of all exploration work is conducted in accordance with the CIM Exploration Best Practices Guidelines. The drill core is sawed in half with one-half of the core sample dispatched to Activation Laboratories Ltd. facility located in Dryden, Ontario. The other half of the core is retained for future assay verification and/or metallurgical testing. Other QA/QC procedures include the insertion of blanks and Canadian Reference Standards for every tenth sample in the sample stream. A quarter core duplicate is assayed every 20th sample. The laboratory has its own QA/QC protocols, running standards and blanks with duplicate samples in each batch stream. Additional checks are routinely run on anomalous values including gravimetric analysis and pulp metallic screen fire assays. Gold analysis is conducted by lead collection, fire assay with atomic absorption, and/or gravimetric finish on a 50-gram sample. Check assays are conducted at a secondary ISO certified laboratory (in this case AGAT Laboratories located in Mississauga, Ontario) following the completion of a program.


Qualified
Person

Paul McNeill, P.Geo., VP Exploration of NexGold, is a “Qualified Person” as defined under National Instrument 43-101 Standards of Disclosure for Mineral Projects and has reviewed and approved the scientific and technical disclosure contained in this news release on behalf of NexGold.


About NexGold Mining Corp.

NexGold is a gold-focused company with assets in Canada and Alaska, including the Goldboro Gold Project in Nova Scotia, the Goliath Gold Complex (which includes the Goliath, Goldlund and Miller deposits) in Northwestern Ontario, and additional exploration projects across Canada. NexGold also holds a 100% interest in the high-grade Niblack copper-gold-zinc-silver VMS project in southeast Alaska. NexGold is committed to ongoing, meaningful engagement with regional communities and Indigenous Nations to support sustainable development, safe operations, and shared economic and social benefits.

Further details about NexGold, including a Feasibility Study for the Goldboro Gold Project and a Prefeasibility Study for the Goliath Gold Complex, are available under the Company’s issuer profile on www.sedarplus.ca and on NexGold’s website at www.nexgold.com.


Contact
:

Greg DiTomaso
Investor Relations
+1 (647) 547-5357
gditomaso@nexgold.com

Posted May 19, 2026

Share this news article

MORE or "UNCATEGORIZED"


Critical Metals Corp Achieves Breakthrough Tanbreez Heavy Rare Earth Results: >99% Dissolution of Eudialyte Concentrate Into 19 Ultra-High-Purity Rare Earth Products; Refinery Study Projects US$1.8–2.2b in Annual Refinery Revenue

Critical Metals Corp. (Nasdaq: CRML) a leading critical minerals ... READ MORE

September 16, 2026

Metalsource Mining Extends High Grade Mineralization at Depth as Silver Hill Exploration Enters Major Expansion Phase

Holes SH26-22 and SH26-23 return up to 930 g/t AgEq within broade... READ MORE

September 16, 2026

Pasinex Completes Sale of High-Grade Zinc Sulphide Material and Provides Pinargozu Operations Update

Pasinex Resources Limited (CSE: PSE) (FSE: PNX) a growing zinc-fo... READ MORE

September 16, 2026

Aya Gold & Silver Reports High-Grade Silver Exploration Results Near Pit and at Depth at Zgounder

Aya Gold & Silver Inc. (TSX: AYA; NASDAQ: AYA) is pleased to... READ MORE

September 16, 2026

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) has received results from the last four holes of a ten-hole, 1,996 metre summer drilling program in the Zavitz gold zone at the Company's 100% owned Moray gold project. In total, New Break has completed 5,372 metres of drilling in 32 drillholes in 2026. Moray is located 49 km southeast of Timmins, Ontario and 32 km northwest of the Young-Davidson gold mine operated by Alamos Gold Inc. Select results from the final four of ten holes drilled in the summer drilling program are presented below in Table 1, while drillhole collar locations are detailed in Table 2 in Appendix A. Table 1 – Moray Summer 2026 Final Drill Results Hole ID Length (m) From (m) To (m) Width (1) (m) Au Grade (2) (g/t) NBR-26-29 322.0 77.3 78.8 1.5 0.42 and 138.0 139.1 1.1 0.38 and 162.5 173.3 10.8 (3) 1.61 and 227.4 229.0 1.6 1.21 and 231.5 232.1 0.6 1.72 NBR-26-30 250.0 37.0 38.0 1.0 0.30 and 102.8 103.5 0.7 0.60 and 121.5 122.5 1.0 0.36 and 124.5 125.5 1.0 0.33 and 128.5 129.0 0.5 0.90 and 131.0 132.0 1.0 0.36 and 169.8 174.0 4.2 2.65 and 178.0 179.5 1.5 0.77 and 183.5 186.6 3.1 1.22 and 190.0 190.5 0.5 1.06 and 191.5 192.5 1.0 1.48 and 196.0 200.5 4.5 2.53 and 203.5 204.0 0.5 2.15 and 206.5 212.0 5.5 1.57 NBR-26-31 274.0 169.0 170.5 1.5 0.37 and 184.5 186.0 1.5 0.51 and 197.0 200.0 3.0 0.94 and 201.5 202.0 0.5 0.50 and 203.5 210.0 6.5 (3) 3.12 NBR-26-32 352.0 73.5 74.0 0.5 0.44 and 174.0 174.6 0.6 0.52 and 194.0 195.0 1.0 0.66 and 199.8 203.3 3.5 2.29 and 227.3 228.0 0.7 0.97 (1) Intervals are drill intersections and do not necessarily represent true widths. (2) All intervals are presented using a cut-off grade of 0.3 g/t Au and internal dilution of no more than 1.0 metres at grades less than 0.3 g/t Au and assays are not capped (see QA/QC Procedures). (3) Drill core photos shown in Appendix B. Figure 1 – Newly Reported Drillholes NBR-26-29, 30 Figure 2 – Newly Reported Drillholes NBR-26-30, 31, 32 Note: The bottom of NBR-26-30 deviated southeast and is represented in both sections. Figure 1: Section B-B1 incorporates drillholes NBR-26-06, 07, 08, 25, 26, 27, 28, 29 and part of 30. Gold mineralization extends southeast into the syenite as exhibited in NBR-26-29. NBR-26-30 is identified in both sections A-A1 and B-B1 as the drillhole was collared along section A-A1 but deviated southeast, intersecting gold mineralization in the mafic volcanics in section B-B1. Figure 2: A-A1 incorporates drillholes NBR-26-03, 04, 05, 23, 24, 30, 31 and 32. NBR-26-31 exhibits gold mineralization both within the syenite (at the contact) and within a "flow breccia" within the hematite altered mafic volcanic at the contact. NBR-26-32 is typified by blocky faulted ground with lamprophyre dykes and gold mineralization in the hematite altered mafic volcanics in a brecciated quartz vein with angular syenitic fragments. William Love, Chief Executive Officer of New Break commented, "Ongoing drilling this summer in the Zavitz gold zone continues to deliver significant gold values, with gold mineralization intercepted in every drillhole. As depicted in Figures 1 and 2, gold mineralization has been encountered predominantly within the mafic volcanics. Importantly, drillholes NR-26-29 and NR-26-32, the deepest drilled to date, demonstrate that gold mineralization extends into the syenite to the southeast at the contact with the mafic volcanics." He further noted, "The intrusive-mafic volcanic contact in the Zavitz gold zone has a distinctive magnetic high. This could be reflective of the higher proportion of iron in these mafic volcanics, which is associated with the higher gold values. This same magnetic and IP signature has been identified elsewhere in areas also believed to be along the intrusive-mafic volcanic contact. Drilling these never before tested targets with the goal of identifying gold mineralization similar to that encountered in the Zavitz zone represents the potential for significantly expanding the Moray gold discovery. There is also the belief that the Zavitz zone could represent the first of a series of stacked mineralized gold zones, which would point to the potential for a much larger gold system at depth. We plan to test this through deeper drilling directly into the Zavitz zone." About the Moray Gold Project The Moray property is located in the heart of the Ontario Abitibi greenstone belt, 49 km southeast of Timmins surrounded by a number of significant gold producing companies and existing mills (see Figure 3). The Young-Davidson gold mine operated by Alamos Gold Inc., with its 8,000 tonne per day mill is the closest and within a short trucking distance of approximately 45 km by road from Moray. The understanding of gold mineralization at Moray continues to evolve with each round of drilling. The occurrence of gold mineralization extending into the syenite to the southeast of the Zavitz zone and in the deepest drillholes is noteworthy given the presence of syenite-hosted mineralization at Young-Davidison. More recent examination of the drill core also suggests that the gold mineralization discovered to date may resemble an intrusion related style of deposit like Agnico Eagle's Upper Beaver gold deposit east of Kirkland Lake, as opposed to a structurally hosted gold system. Both Young-Davidson and Upper Beaver host multi-million ounce gold deposits. Figure 3 – Moray Location Map: Surrounding Gold Producers and Upper Beaver Gold Project Technical Content and Qualified Person The scientific and technical information contained in this news release has been reviewed and approved by Peter C. Hubacheck, P. Geo, consulting geologist to New Break, and an independent Qualified Person as defined by National Instrument 43-101. Mr. Hubacheck certifies that this news release fairly and accurately reflects the technical information and data presented. New Break conducts its exploration activities in accordance with CIM Best Practices Guidelines. QA/QC Procedures QA/QC procedures were executed to ensure all work is conducted in accordance with best practices. All drill core was sawn in half with one half of the core prepared for shipment and the other half retained for future verification. All core is under watch from the drill site to the core processing facility. Drill core is BQTK size and sample intervals range from 0.5 metres to 1.0 metres in length. Commercially prepared certified reference material ("CRM") standards and blanks were inserted with each shipment at a rate of 1 QAQC sample in every 12 core samples. Samples from New Break's 2026 Moray drilling program were analyzed at Activation Laboratories in Timmins, Ontario, which is ISO 17025 certified, by 30-gram fire assay with atomic absorption finish. Any sample assaying greater than 10.0 g/t Au was re-assayed with fire assay gravimetric analysis. Grade composite intervals over core lengths are calculated using a weighted average grade with a cut-off grade of 0.3 g/t Au. Up to 1.0 m of internal dilution (consecutive interval below cut-off grade) are included within specific geologic domains and alteration assemblages, except as otherwise noted. The composites are constrained geologically by metasomatic alteration processes sourcing from the Fiset syenite intrusion and contact mafic volcanic rocks. Elevated gold values are coincident with hematite, silica, sericite and pyrite mineralization within structurally prepared brecciated corridors flanking the intrusion. Intervals are not true widths and no top cutting has been applied to the higher gold values. About New Break Resources Ltd. New Break is a Canadian mineral exploration company focused on its Moray gold project located 49 km southeast of Timmins, Ontario, in a well-established mining camp within proximity to existing infrastructure, and 32 km northwest of the Young-Davidson gold mine, operated by Alamos Gold Inc. Shareholders are also leveraged to exploration success in Nunavut, Canada, through New Break's 20% carried interest in the Sundog gold project and ownership of 6.0 million shares of Guardian Exploration Inc. (TSXV: GX). The Company is supported by a highly experienced team of mining professionals. Appendix A – Drillhole Data and Locations Table 2 – Moray Summer 2026 Drillhole Collar Locations Hole ID Length (m) UTM Easting UTM Northing UTM Elevation Azimuth (degrees) Dip (degrees) NBR-26-29 322.0 492703 5320285 363 220 -70 NBR-26-30 250.0 492708 5320329 363 220 -47 NBR-26-31 274.0 492708 5320329 363 220 -60 NBR-26-32 352.0 492708 5320329 363 220 -70 Total 1,198.0 Coordinates are reported in UTM Zone 17 North, with units in metres. Figure 4 – Zavitz Gold Zone – Surface Traces of 2025 and 2026 Drillholes. All of the drilling at Moray has been completed by Enviro North Exploration Inc. out of Sturgeon Falls, Ontario. Drilling in the Zavitz gold zone is shown in figure 4, with the 1,996 metres in 10 holes drilled this summer depicted in red, the 2,807 metres in 20 holes drilled from January to April 2026 shown in blue and the 1,817 metres in 8 holes drilled in 2025 shown in black. In total, 6,620 metres in 38 drillholes have been completed in the Zavitz gold zone, while New Break has completed a total of 5,372 metres in 32 drillholes of our planned 2026, 10,000 metre drilling program. Appendix B – Drill Core Photos From NBR-26-29 and NBR-26-31

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) ha... READ MORE

September 16, 2026

Copyright 2026 The Prospector News