Uncategorized
NEVADA KING INTERCEPTS 1.62 G/T AU OVER 93M & 1.78 G/T AU OVER 62.5M IN TWO HOLES SOUTH OF THE ATLANTA PIT
Nevada King Gold Corp. (TSX-V: NKG) (OTCQX: NKGFF) is pleased to announce assay results from six reverse circulation holes recently completed at its Atlanta Gold Mine Project located 264km northeast of Las Vegas, Nevada, in the prolific Battle Mountain Trend. Today’s holes are plotted in plan and section on Figures 1 and 2 below.
Highlights:
| Hole No. | From (m) | To (m) | Interval (m) | Au (g/t) | Ag (g/t) | Zone |
| AT22SE-16A | 176.8 | 320.1 | 93.0 | 1.62 | 6.7 | WAGZ |
| AT23HG-27 | 193.6 | 256.1 | 62.5 | 1.78 | 3.7 | WAGZ |
| AT23WS-51 | 158.5 | 160.1 | 1.5 | 0.56 | 0.0 | WAGZ |
| AT23NS-131* | 103.7 | 141.8 | 38.1 | 1.98 | 6.3 | AMFZ |
| AT23NS-167* | 56.4 | 99.1 | 42.7 | 1.19 | 36.4 | AMFZ |
| AT23NS-167B* | 50.3 | 71.6 | 21.3 | 1.35 | 40.6 | AMFZ |
| Table 1. Holes released today along Section 23-5N(3). Mineralization occurs along near-horizontal horizons with true mineralized thickness in vertical holes estimated to be 85% to 95% of reported drill intercept length. True mineralized thickness in angle holes estimated to be 75% to 90% of reported intercept length. *Denotes angle hole. | ||||||
- 1.98 g/t Au over 38.1m in AT23NS-131, 1.19 g/t Au over 42.7m in AT23NS-167, and 1.35 g/t Au over 21.3m in AT23NS-167B were intercepted in a series of northward-directed angle holes sited along the eastern margin of the Atlanta Mine Fault Zone (“AMFZ“) to test a 100m-wide gap in drill coverage at the southwestern corner of the historical Atlanta open pit. These intercepts continue to demonstrate good lateral continuity of mineralization in this area.
- 1.62 g/t Au over 93.0m in AT22SE-16A and 1.78 g/t Au over 62.5m in AT23HG-27 were sited within the West Atlanta Graben Zone (“WAGZ“) to fill in gaps that were present, with both holes displaying good continuity of grade and thickness moving eastward toward the West Atlanta Fault.
- AT23WS-51 was also sited within the WAGZ but did not encounter significant gold values, effectively bounding the WAGZ mineralization on its southwestern margin along this portion of the system. Strong mineralization is still seen in holes located southeast of AT23WS-51 moving toward the South Quartzite Ridge Target, and the Company intends to target potential extensions of mineralization south of AT22SE-16A and AT23HG-27 in its drilling over the coming months.
Cal Herron, Exploration Manager of Nevada King, stated, “The three northward directed angle holes complete our infill drilling within the approximately 100m-wide gap in drill coverage that existed at the southwest corner of the historical Atlanta pit. We have now successfully demonstrated continuity of mineralization along the western side of the pit together with mineralization south of the pit and eliminated a data gap over a plan view area of approximately 10,000m2 that formed a prominent “hole” in the 2020 resource model.
“The three holes drilled across the WAGZ were sited to infill gaps in the existing drill pattern, and in the case of AT22SE-16A (1.62 g/t Au over 93.0m), mineralization was extended 20m further south from Nevada King’s previously released hole AT22HG-16 (1.21 g/t Au over 129.6m) reported to the north along line 22-6N (released January 6, 2023). This southward trend will be followed with additional holes in the coming months. AT23WS-51 (0.56 g/t Au over 1.5m) effectively delimits mineralization 25m west of historical hole ARC-5 (2.97 g/t Au over 71.8m). Both holes drilled the same volcanic sequence, so the mineralization contact separating these holes is most likely an alteration contact as opposed to fault contact. Additional drilling southeast of AT23WS-51 is needed in order to better define this contact where it trends toward the South Quartzite Ridge Target.”
| Hole No. | From (m) | To (m) | Interval (m) | Au (g/t) | Ag (g/t) |
| AT23HG-21 | 149.4 | 219.5 | 70.1 | 3.18 | 20.8 |
| AT22HG-13 | 109.8 | 192.1 | 82.3 | 3.60 | 11.0 |
| AT22NS-69 | 89.9 | 135.7 | 45.7 | 1.57 | 8.5 |
| AT22NS-80 | 80.8 | 129.6 | 48.8 | 1.37 | 6.6 |
| AT22NS-82 | 102.1 | 128.0 | 25.9 | 2.71 | 6.1 |
| AT22HG-8T | 135.7 | 278.7 | 89.3 | 2.74 | 3.0 |
| AT22SE-42 | 122.0 | 318.6 | 163.1 | 0.98 | 2.5 |
| AT21-41B* | 38.1 | 73.2 | 35 | 1.17 | 9.5 |
| AT21-42A* | 18.3 | 50.3 | 32 | 0.80 | 5.9 |
| AT21-43A* | 19.8 | 33.5 | 13.7 | 1.9 | 18.6 |
| AT22RC-11 | 0.0 | 33.5 | 33.5 | 1.28 | 0.5 |
| AT22RC-12* | 0 | 57.9 | 57.9 | 1.38 | 14.0 |
| ARC-5 | 131.1 | 202.7 | 71.6 | 2.97 | 11.1 |
| ARC-1 | 176.5 | 289.9 | 113.4 | 2.11 | 10.8 |
| AR-18 | 221 | 257.6 | 36.6 | 0.53 | 1.9 |
| Table 2. Previously reported and historical holes used along updated Section 22-5N(3). AT22 series holes were drilled by Nevada King in 2022 and the AT21 series holes were drilled in 2021. ARC and AR series holes drilled by Goldfields in 1990. True thickness of gold mineralization interpreted in today’s release is 90% to 100% of the reported intercept length in vertical holes. True mineralized thickness in angle holes estimated to be 75% to 90% of reported intercept length. *Denotes angle hole. |
|||||
QAQC Protocols
All RC samples from the Atlanta Project are split at the drill site and placed in cloth and plastic bags utilizing a nominal 2kg sample weight. CRF standards, blanks, and duplicates are inserted into the sample stream on-site on a one-in-twenty sample basis, meaning all three inserts are included in each 20-sample group. Samples are shipped by a local contractor in large sample shipping crates directly to American Assay Lab in Reno, Nevada, with full custody being maintained at all times. At American Assay Lab, samples were weighed then crushed to 75% passing 2mm and pulverized to 85% passing 75 microns in order to produce a 300g pulverized split. Prepared samples are initially run using a four acid + boric acid digestion process and conventional multi-element ICP-OES analysis. Gold assays are initially run using 30-gram samples by lead fire assay with an OES finish to a 0.003 ppm detection limit, with samples greater than 10 ppm finished gravimetrically. Silver samples that run greater than 100ppm are also finished gravimetrically. Every sample is also run through a cyanide leach for gold with an ICP-OES finish. The QA/QC procedure involves regular submission of Certified Analytical Standards and property-specific duplicates.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved by Calvin R. Herron, P.Geo., who is a Qualified Person as defined by National Instrument 43-101.
About Nevada King Gold Corp.
Nevada King is the third largest mineral claim holder in the State of Nevada, behind Nevada Gold Mines (Barrick/Newmont) and Kinross Gold. Starting in 2016 the Company has staked large project areas hosting significant historical exploration work along the Battle Mountain trend located close to current or former producing gold mines. These project areas were initially targeted based on their potential for hosting multi-million-ounce gold deposits and were subsequently staked following a detailed geological evaluation. District-scale projects in Nevada King’s portfolio include (1) the 100% owned Atlanta Mine, located 100km southeast of Ely, (2) the Lewis and Horse Mountain-Mill Creek projects, both located between Nevada Gold Mines’ large Phoenix and Pipeline mines, and (3) the Iron Point project, located 35km east of Winnemucca, Nevada.
The Atlanta Mine is a historical gold-silver producer with a NI 43-101 compliant pit-constrained resource of 460,000 oz Au in the measured and indicated category (11.0M tonnes at 1.3 g/t) plus an inferred resource of 142,000 oz Au (5.3M tonnes at 0.83 g/t). See the NI 43-101 Technical Report on Resources titled “Atlanta Property, Lincoln County, NV” with an effective date of October 6, 2020, and a report date of December 22, 2020, as prepared by Gustavson Associates and filed under the Company’s profile on SEDAR+ (www.sedarplus.ca).
| Resource Category | Tonnes
(000s) |
Au Grade (ppm) |
Contained Au Oz |
Ag Grade
(ppm) |
Contained Ag Oz |
| Measured | 4,130 | 1.51 | 200,000 | 14.0 | 1,860,000 |
| Indicated | 6,910 | 1.17 | 260,000 | 10.6 | 2,360,000 |
| Measured + Indicated | 11,000 | 1.30 | 460,000 | 11.9 | 4,220,000 |
| Inferred | 5,310 | 0.83 | 142,000 | 7.3 | 1,240,000 |
| Table 3. NI 43-101 Mineral Resources at the Atlanta Mine | |||||
Figure 1. Location map for holes reported in this news release along updated drill Section 22-5N(3) relative to the perimeter of the historical Atlanta Pit and footprint of the Gustavson 2020 NI 43-101 resource. Shallow drillholes on the mine dumps have been removed from the plot for clarity. (CNW Group/Nevada King Gold Corp.)
Figure 2. Updated cross section 22-5N(3) looking north across the West Atlanta Fault that divides the AMFZ target on the east from the WAGZ target on the west. Along the AMFZ Au/Ag mineralization is largely hosted within a silica breccia horizon developed on top the Paleozoic dolomite and quartzite units, whereas mineralization within the WAGZ is largely hosted within volcanic tuff and sediments above the Paleozoic basement. (CNW Group/Nevada King Gold Corp.)
Posted January 30, 2024
MORE or "UNCATEGORIZED"
Critical Metals Corp Achieves Breakthrough Tanbreez Heavy Rare Earth Results: >99% Dissolution of Eudialyte Concentrate Into 19 Ultra-High-Purity Rare Earth Products; Refinery Study Projects US$1.8–2.2b in Annual Refinery Revenue
Critical Metals Corp. (Nasdaq: CRML) a leading critical minerals ... READ MORE
September 16, 2026
Metalsource Mining Extends High Grade Mineralization at Depth as Silver Hill Exploration Enters Major Expansion Phase
Holes SH26-22 and SH26-23 return up to 930 g/t AgEq within broade... READ MORE
September 16, 2026
Pasinex Completes Sale of High-Grade Zinc Sulphide Material and Provides Pinargozu Operations Update
Pasinex Resources Limited (CSE: PSE) (FSE: PNX) a growing zinc-fo... READ MORE
September 16, 2026
Aya Gold & Silver Reports High-Grade Silver Exploration Results Near Pit and at Depth at Zgounder
Aya Gold & Silver Inc. (TSX: AYA; NASDAQ: AYA) is pleased to... READ MORE
September 16, 2026
New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) has received results from the last four holes of a ten-hole, 1,996 metre summer drilling program in the Zavitz gold zone at the Company's 100% owned Moray gold project. In total, New Break has completed 5,372 metres of drilling in 32 drillholes in 2026. Moray is located 49 km southeast of Timmins, Ontario and 32 km northwest of the Young-Davidson gold mine operated by Alamos Gold Inc. Select results from the final four of ten holes drilled in the summer drilling program are presented below in Table 1, while drillhole collar locations are detailed in Table 2 in Appendix A. Table 1 – Moray Summer 2026 Final Drill Results Hole ID Length (m) From (m) To (m) Width (1) (m) Au Grade (2) (g/t) NBR-26-29 322.0 77.3 78.8 1.5 0.42 and 138.0 139.1 1.1 0.38 and 162.5 173.3 10.8 (3) 1.61 and 227.4 229.0 1.6 1.21 and 231.5 232.1 0.6 1.72 NBR-26-30 250.0 37.0 38.0 1.0 0.30 and 102.8 103.5 0.7 0.60 and 121.5 122.5 1.0 0.36 and 124.5 125.5 1.0 0.33 and 128.5 129.0 0.5 0.90 and 131.0 132.0 1.0 0.36 and 169.8 174.0 4.2 2.65 and 178.0 179.5 1.5 0.77 and 183.5 186.6 3.1 1.22 and 190.0 190.5 0.5 1.06 and 191.5 192.5 1.0 1.48 and 196.0 200.5 4.5 2.53 and 203.5 204.0 0.5 2.15 and 206.5 212.0 5.5 1.57 NBR-26-31 274.0 169.0 170.5 1.5 0.37 and 184.5 186.0 1.5 0.51 and 197.0 200.0 3.0 0.94 and 201.5 202.0 0.5 0.50 and 203.5 210.0 6.5 (3) 3.12 NBR-26-32 352.0 73.5 74.0 0.5 0.44 and 174.0 174.6 0.6 0.52 and 194.0 195.0 1.0 0.66 and 199.8 203.3 3.5 2.29 and 227.3 228.0 0.7 0.97 (1) Intervals are drill intersections and do not necessarily represent true widths. (2) All intervals are presented using a cut-off grade of 0.3 g/t Au and internal dilution of no more than 1.0 metres at grades less than 0.3 g/t Au and assays are not capped (see QA/QC Procedures). (3) Drill core photos shown in Appendix B. Figure 1 – Newly Reported Drillholes NBR-26-29, 30 Figure 2 – Newly Reported Drillholes NBR-26-30, 31, 32 Note: The bottom of NBR-26-30 deviated southeast and is represented in both sections. Figure 1: Section B-B1 incorporates drillholes NBR-26-06, 07, 08, 25, 26, 27, 28, 29 and part of 30. Gold mineralization extends southeast into the syenite as exhibited in NBR-26-29. NBR-26-30 is identified in both sections A-A1 and B-B1 as the drillhole was collared along section A-A1 but deviated southeast, intersecting gold mineralization in the mafic volcanics in section B-B1. Figure 2: A-A1 incorporates drillholes NBR-26-03, 04, 05, 23, 24, 30, 31 and 32. NBR-26-31 exhibits gold mineralization both within the syenite (at the contact) and within a "flow breccia" within the hematite altered mafic volcanic at the contact. NBR-26-32 is typified by blocky faulted ground with lamprophyre dykes and gold mineralization in the hematite altered mafic volcanics in a brecciated quartz vein with angular syenitic fragments. William Love, Chief Executive Officer of New Break commented, "Ongoing drilling this summer in the Zavitz gold zone continues to deliver significant gold values, with gold mineralization intercepted in every drillhole. As depicted in Figures 1 and 2, gold mineralization has been encountered predominantly within the mafic volcanics. Importantly, drillholes NR-26-29 and NR-26-32, the deepest drilled to date, demonstrate that gold mineralization extends into the syenite to the southeast at the contact with the mafic volcanics." He further noted, "The intrusive-mafic volcanic contact in the Zavitz gold zone has a distinctive magnetic high. This could be reflective of the higher proportion of iron in these mafic volcanics, which is associated with the higher gold values. This same magnetic and IP signature has been identified elsewhere in areas also believed to be along the intrusive-mafic volcanic contact. Drilling these never before tested targets with the goal of identifying gold mineralization similar to that encountered in the Zavitz zone represents the potential for significantly expanding the Moray gold discovery. There is also the belief that the Zavitz zone could represent the first of a series of stacked mineralized gold zones, which would point to the potential for a much larger gold system at depth. We plan to test this through deeper drilling directly into the Zavitz zone." About the Moray Gold Project The Moray property is located in the heart of the Ontario Abitibi greenstone belt, 49 km southeast of Timmins surrounded by a number of significant gold producing companies and existing mills (see Figure 3). The Young-Davidson gold mine operated by Alamos Gold Inc., with its 8,000 tonne per day mill is the closest and within a short trucking distance of approximately 45 km by road from Moray. The understanding of gold mineralization at Moray continues to evolve with each round of drilling. The occurrence of gold mineralization extending into the syenite to the southeast of the Zavitz zone and in the deepest drillholes is noteworthy given the presence of syenite-hosted mineralization at Young-Davidison. More recent examination of the drill core also suggests that the gold mineralization discovered to date may resemble an intrusion related style of deposit like Agnico Eagle's Upper Beaver gold deposit east of Kirkland Lake, as opposed to a structurally hosted gold system. Both Young-Davidson and Upper Beaver host multi-million ounce gold deposits. Figure 3 – Moray Location Map: Surrounding Gold Producers and Upper Beaver Gold Project Technical Content and Qualified Person The scientific and technical information contained in this news release has been reviewed and approved by Peter C. Hubacheck, P. Geo, consulting geologist to New Break, and an independent Qualified Person as defined by National Instrument 43-101. Mr. Hubacheck certifies that this news release fairly and accurately reflects the technical information and data presented. New Break conducts its exploration activities in accordance with CIM Best Practices Guidelines. QA/QC Procedures QA/QC procedures were executed to ensure all work is conducted in accordance with best practices. All drill core was sawn in half with one half of the core prepared for shipment and the other half retained for future verification. All core is under watch from the drill site to the core processing facility. Drill core is BQTK size and sample intervals range from 0.5 metres to 1.0 metres in length. Commercially prepared certified reference material ("CRM") standards and blanks were inserted with each shipment at a rate of 1 QAQC sample in every 12 core samples. Samples from New Break's 2026 Moray drilling program were analyzed at Activation Laboratories in Timmins, Ontario, which is ISO 17025 certified, by 30-gram fire assay with atomic absorption finish. Any sample assaying greater than 10.0 g/t Au was re-assayed with fire assay gravimetric analysis. Grade composite intervals over core lengths are calculated using a weighted average grade with a cut-off grade of 0.3 g/t Au. Up to 1.0 m of internal dilution (consecutive interval below cut-off grade) are included within specific geologic domains and alteration assemblages, except as otherwise noted. The composites are constrained geologically by metasomatic alteration processes sourcing from the Fiset syenite intrusion and contact mafic volcanic rocks. Elevated gold values are coincident with hematite, silica, sericite and pyrite mineralization within structurally prepared brecciated corridors flanking the intrusion. Intervals are not true widths and no top cutting has been applied to the higher gold values. About New Break Resources Ltd. New Break is a Canadian mineral exploration company focused on its Moray gold project located 49 km southeast of Timmins, Ontario, in a well-established mining camp within proximity to existing infrastructure, and 32 km northwest of the Young-Davidson gold mine, operated by Alamos Gold Inc. Shareholders are also leveraged to exploration success in Nunavut, Canada, through New Break's 20% carried interest in the Sundog gold project and ownership of 6.0 million shares of Guardian Exploration Inc. (TSXV: GX). The Company is supported by a highly experienced team of mining professionals. Appendix A – Drillhole Data and Locations Table 2 – Moray Summer 2026 Drillhole Collar Locations Hole ID Length (m) UTM Easting UTM Northing UTM Elevation Azimuth (degrees) Dip (degrees) NBR-26-29 322.0 492703 5320285 363 220 -70 NBR-26-30 250.0 492708 5320329 363 220 -47 NBR-26-31 274.0 492708 5320329 363 220 -60 NBR-26-32 352.0 492708 5320329 363 220 -70 Total 1,198.0 Coordinates are reported in UTM Zone 17 North, with units in metres. Figure 4 – Zavitz Gold Zone – Surface Traces of 2025 and 2026 Drillholes. All of the drilling at Moray has been completed by Enviro North Exploration Inc. out of Sturgeon Falls, Ontario. Drilling in the Zavitz gold zone is shown in figure 4, with the 1,996 metres in 10 holes drilled this summer depicted in red, the 2,807 metres in 20 holes drilled from January to April 2026 shown in blue and the 1,817 metres in 8 holes drilled in 2025 shown in black. In total, 6,620 metres in 38 drillholes have been completed in the Zavitz gold zone, while New Break has completed a total of 5,372 metres in 32 drillholes of our planned 2026, 10,000 metre drilling program. Appendix B – Drill Core Photos From NBR-26-29 and NBR-26-31
New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) ha... READ MORE
September 16, 2026
