The Prospector News

Mako Mining Intersects 42.91 g/t Au and 38.3 g/t Ag over 4.1m (Estimated True Width) in New Zone, 35.5m from Surface, 50m from Current Mining – Over 530m Strike Length, Open Along Strike and down Dip

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Mako Mining Intersects 42.91 g/t Au and 38.3 g/t Ag over 4.1m (Estimated True Width) in New Zone, 35.5m from Surface, 50m from Current Mining – Over 530m Strike Length, Open Along Strike and down Dip

 

 

 

 

 

Mako Mining Corp. (TSX-V: MKO) (OTCQX: MAKOF) is pleased to report additional high-grade drill results from an area beginning approximately 50m southwest of the current open pit mining operations at the San Albino West Pit in northern Nicaragua.

 

Recent drilling has confirmed gold mineralization over an area of approximately 530m x 470m (strike x dip) in an area that was identified in the 2020 Mineral Resource Estimate as the SW Pit.  At the time of the resource estimate, this area measured approximately 50m x 50m (see drill plan below).

 

To date a total of 27,533 meters (m) in 202 drill holes (2011-2022) has been completed in the area. Most of the drilling intersected mineralization within, or immediately outside, the currently permitted pit limits.

 

Highlights of selected intercepts of the high-grade gold mineralization include:

  • 42.91 g/t Au and 38.3 g/t Ag over 4.50m (4.1m estimated true width-ETW) in hole SA22-615
  • 21.21 g/t Au and 35.5 g/t Ag over 2.00m (1.4m ETW) in hole SA22-609
  • 34.35 g/t Au and 24.9 g/t Ag over 2.80m (2.7m ETW) in hole SA22-546
  • 20.06 g/t Au and 71.3 g/t Ag over 1.00 m (ETW) in hole SA21-545

 

The objective of the SW Pit drilling program is to delineate new mineral resources amenable to open pit and underground mining methods in the sparsely tested Southwestern portion of the permitted pit limit, as well as to test extensions of this mineralization beyond the permitted pit limit.

 

Previous drilling in this area defined both shallow and deeper mineral resources; however, the continuity of these zones was not established at the time, and their contribution to the 2020 Mineral Resource Estimate was limited due to lack of continuity. Recent drilling has successfully linked deeper mineralized zones to near surface zones and has confirmed the presence of gold mineralization over an area of approximately 530m by strike and 470m by dip (see section & drill plan below). Results for an additional 13 drill holes in the area are pending. This current program is expected to demonstrate the continuity of these zones so that they can be included in an updated mineral resource expected early next year.

 

A technical report for the current mineral resource estimate at San Albino is available under the Company’s SEDAR profile at www.sedar.com and available on the Company’s website at www.makominingcorp.com (see press release dated October 19, 2020).

 

Akiba Leisman, CEO of Mako states, “when we updated our mineral resource estimate in 2020, we intentionally limited significant intercepts if we did not have complete confidence in the geological continuity of a specific zone. The SW Pit was reduced to a de minimis size despite expecting that these excluded areas would inevitably be included in subsequent mineral resource updates with additional drilling. These high grade and shallow results have both established geological continuity and extended areas of mineralization beyond anything that has been drilled to date.  Specifically, hole SA22-615, which intersected 42.9 g/t gold over 4.1m estimated true width only 35.5m from surface, was drilled just outside our permitted pit, and directly underneath our mining contractor’s workshop. Plans to move this workshop are currently underway to support future mining activities in this area.”

 

Details of select intersects:

 

Drill hole SA22-615 intersected multiple mineralized intervals of near surface gold mineralization, including 42.91 g/t Au and 38.3 g/t Ag over 4.50m (4.1m estimated true width- ETW), 35.5m below surface. This drill hole is collared 22m outside the current permitted pit limit and is the furthest mineralization recorded to the south in this area to date. In addition, this hole intersected two mineralized intervals grading 1.44 g/t Au and 30.7 g/t Ag over 0.50m (0.5m ETW), 30.6m from the surface and 15.68 g/t Au and 7.4 g/t Ag over 1.90m (1.9m ETW), at 59.7m below surface, indicating potential to expand the open pit mineral resources.

 

SA22-609 intersected a mineralized interval of 21.21 g/t Au and 35.5 g/t Ag over 2.00m (1.4m ETW) 127.3m from surface. This hole was drilled to test the down dip extension (approx. 40m) of the high-grade mineralization of 14.76 g/t Au and 25.1 g/t Ag over 2.00m encountered in drill hole SA11-25 (see press release dated November 21, 2011).

 

Two drill holes, SA22-546 and SA21-545, collared on the same drill pad, intersected multiple mineralized zones (see table below), including 34.35 g/t Au and 24.9 g/t Ag over 2.80m (2.7m ETW) and 20.06 g/t Au and 71.3 g/t Ag over 1.00m (ETW), respectively. Both of these drill holes confirmed down dip, high-grade mineralization intersected by drill holes SA21-536 and SA21-543 for an additional 38m. The previously reported results of the holes are 31.70 g/t Au and 39.2 g/t Ag over 2.40m (1.5m ETW) and 13.51 g/t Au and 36.1 g/t Ag over 1.90m (1.8m ETW) respectively (see press releases dated February 02, 2022, and March 09, 2022).

 

Table 1: Assay Results Reported in This Press Release

 

Drill hole From (m) To (m) Width (m) Au (g/t) Ag (g/t) Interval ETW (m)
SA21-538 80.40 81.20 0.80 35.60 28.2 11.79 g/t Au and 9.9 g/t Ag over 2.50m 2.2
81.20 82.00 0.80 0.11 0.7
82.00 82.90 0.90 1.01 1.9
SA21-544 74.50 75.10 0.60 1.14 0.5 4.28 g/t Au and 16.7 g/t Ag over 1.00 m 1.0
75.10 75.50 0.40 9.00 41.1
95.70 96.40 0.70 1.20 5.9 1.20 g/t Au and 5.9 g/t Ag over 0.70 m 0.8
144.50 145.00 0.50 33.90 9.6 33.90 g/t Au and 9.6 g/t Ag over 0.50 m 0.5
SA21-545 95.00 96.00 1.00 1.10 1.1 1.10 g/t Au and 1.1 g/t Ag over 1.00 m 1.0
100.80 101.20 0.40 17.00 43.5 20.06 g/t Au and 71.3 g/t Ag over 1.00 m 1.0
101.20 101.80 0.60 22.10 89.9
104.90 105.50 0.60 12.60 19.5 12.60 g/t Au and 19.5 g/t Ag over 0.60 m 0.6
129.40 130.00 0.60 4.09 7.3 2.48 g/t Au and 4.8 g/t Ag over 1.50 m 1.4
130.00 130.90 0.90 1.41 3.1
SA22-546 92.90 93.90 1.00 1.23 3.2 1.23 g/t Au and 3.2 g/t Ag over 1.00m 0.9
100.00 100.60 0.60 4.44 23.2 3.85 g/t Au and 36.5 g/t Ag over 1.00m 1.0
100.60 101.00 0.40 2.98 56.4
114.90 115.50 0.60 16.90 29.0 8.22 g/t Au and 23.2 g/t Ag over 1.50m 1.5
115.50 116.40 0.90 2.43 19.3
119.50 120.20 0.70 34.30 23.0 34.35 g/t Au and 24.9 g/t Ag over 2.80m 2.7
120.20 120.80 0.60 116.90 83.0
120.80 121.40 0.60 0.29 0.9
121.40 122.30 0.90 2.07 3.5
SA22-549 45.90 46.40 0.50 24.80 15.9 24.80 g/t Au and 15.9 g/t Ag over 0.50m 0.5
SA22-575 15.20 16.00 0.80 8.73 19.2 8.73 g/t Au and 19.2 g/t Ag over 0.80m 0.7
SA22-576 13.90 14.90 1.00 10.50 26.4 4.93 g/t Au and 19.3 g/t Ag over 2.50m 2.4
14.90 15.90 1.00 0.20 1.4
15.90 16.40 0.50 3.28 40.7
SA22-580 4.00 4.70 0.70 2.36 2.0 4.88 g/t Au and 5.8 g/t Ag over 3.20m 3.0
4.70 5.40 0.70 3.40 8.2
5.40 6.40 1.00 10.60 8.9
6.40 7.20 0.80 1.21 3.1
SA22-581 8.60 9.50 0.90 6.46 7.5 6.46 g/t Au and 7.5 g/t Ag over 0.90m 0.9
SA22-584 6.90 7.50 0.60 2.26 0.8 2.26 g/t Au and 0.8 g/t Ag over 0.60m 0.5
SA22-600 78.00 79.00 1.00 15.10 13.8 15.10 g/t Au and 13.8 g/t Ag over 1.00m 0.9
81.60 82.00 0.40 10.00 25.3 10.00 g/t Au and 25.3 g/t Ag over 0.40m 0.4
SA22-604 87.50 88.50 1.00 1.23 0.3 1.23 g/t Au and 0.3 g/t Ag over 1.00m 0.9
SA22-606 99.00 99.50 0.50 1.13 0.7 1.13 g/t Au and 0.7 g/t Ag over 0.50m 0.5
SA22-608 104.40 105.00 0.60 7.25 2.4 7.25 g/t Au and 2.4 g/t Ag over 0.60m 0.6
114.50 115.90 1.40 2.02 1.8 2.02 g/t Au and 1.8 g/t Ag over 1.40m 1.4
SA22-609 145.10 146.20 1.10 15.00 37.3 21.21 g/t Au and 35.5 g/t Ag over 2.00m 1.4
146.20 147.10 0.90 28.80 33.4
SA22-610 59.10 59.70 0.60 1.70 5.5 2.94 g/t Au and 5.4 g/t Ag over 1.30m 1.2
59.70 60.40 0.70 4.00 5.3
SA22-611 105.00 105.50 0.50 6.77 16.4 3.40 g/t Au and 7.6 g/t Ag over 1.90m 1.9
105.50 106.00 0.50 0.05 0.6
106.00 106.90 0.90 3.38 6.6
129.70 130.30 0.60 30.40 26.2 30.40 g/t Au and 26.2 g/t Ag over 0.60m 0.5
SA22-612 113.20 114.10 0.90 10.60 25.1 10.60 g/t Au and 25.1 g/t Ag over 0.90m 0.7
SA22-613 51.00 52.00 1.00 1.02 0.7 1.02 g/t Au and 0.7 g/t Ag over 1.00m 0.9
SA22-614 53.20 53.80 0.60 9.30 34.3 9.30 g/t Au and 34.3 g/t Ag over 0.60m 0.6
91.80 92.40 0.60 26.30 38.9 26.30 g/t Au and 38.9 g/t Ag over 0.60m 0.6
SA22-615 30.60 31.10 0.50 1.44 30.7 1.44 g/t Au and 30.7 g/t Ag over 0.50m 0.5
35.50 36.80 1.30 115.40 56.0 42.91 g/t Au and 38.3 g/t Ag over 4.50m 4.1
36.80 37.30 0.50 1.07 2.1
37.30 37.90 0.60 3.52 13.5
37.90 38.30 0.40 3.56 17.1
38.30 39.30 1.00 14.90 47.0
39.30 40.00 0.70 34.40 52.0
59.70 60.60 0.90 5.44 5.9 15.68 g/t Au and 7.4 g/t Ag over 1.90m 1.9
60.60 61.60 1.00 24.90 8.7
SA22-616 to SA22-618 pending
SA22-619 67.30 68.00 0.70 25.40 27.9 17.05 g/t Au and 25.1 g/t Ag over 1.40m 1.4
68.00 68.70 0.70 8.70 22.3
SA22-620 to SA22-623 pending
SA22-653 pending
SA22-654 20.00 20.50 0.50 1.55 16.5 1.55 g/t Au and 16.5 g/t Ag over 0.50m 0.5
SA22-655 to SA22-658 pending
The mineralized intervals shown above utilize a 1.0 g/t gold cut-off grade with not more than 1.0m of internal dilution. *Widths are reported as drill core lengths. **Estimated True Width is estimated from interpreted sections. In addition to the drill holes presented in the table above, the following drill holes returned only anomalous values: SA22-548, SA22-577 to SA22-579, SA22-582, SA22-583, SA22-585 to SA22-587, SA22-602, SA22-603, SA22-605 and SA22-607. A single drill hole returned no significant values: SA22-601. The database with all drilling results to date is available on the Company’s website at www.makominingcorp.com

 

Sampling, Assaying, QA/QC and Data Verification

 

Drill core was continuously sampled from inception to termination of the entire drill hole. Sample intervals were typically one meter. Drill core diameter was HQ (6.35 centimeters). Geologic and geotechnical data was captured into a digital database, core was photographed, then one-half split of the core was collected for analysis and one-half was retained in the core library. Drill core samples were kept in a secured logging and storage facility until such time that they were delivered to the Managua facilities of Bureau Veritas and pulps were sent to the Bureau Veritas laboratory in Vancouver for analysis. Gold was analyzed by standard fire assay fusion, 30gram aliquot, AAS finish. Samples returning over 10.0 g/t gold are analyzed utilizing standard Fire Assay-Gravimetric method. The Company follows industry standards in its QA&QC procedures. Control samples consisting of duplicates, standards and blanks were inserted into the sample stream at a ratio of 1 control sample per every 10 samples. Analytical results of control samples confirmed reliability of the assay data.

 

Qualified Person

 

John M. Kowalchuk, P.Geo, a geologist and qualified person (as defined under NI 43-101) has read and approved the technical information contained in this press release. Mr. Kowalchuk is a senior geologist and a consultant to the Company.

 

About Mako

 

Mako Mining Corp. is a publicly listed gold mining, development and exploration company. The Company operates the high-grade San Albino gold mine in Nueva Segovia, Nicaragua, which ranks as one of the highest-grade open pit gold mines globally.  Mako’s primary objective is to operate San Albino profitably and fund exploration of prospective targets on its district-scale land package.

 


Figure 1. San Albino Mine Drilling Program (CNW Group/Mako Mining Corp.)

Figure 2. Schematic Cross Section (CNW Group/Mako Mining Corp.)

 

 

 

 

Posted June 21, 2022

Share this news article

MORE or "UNCATEGORIZED"


Montage Closes $20 Million Private Placement of Subscription Receipts

Montage Gold Corp.  (TSX-V: MAU) is pleased to announce the clos... READ MORE

June 30, 2022

Cornish Metals Reports Drilling From the Trenares Target, United Downs Project, Cornwall, UK

Cornish Metals Inc. (TSX-V:CUSN) (AIM: CUSN) a dual-listed compan... READ MORE

June 30, 2022

Kodiak Reports Infill Drilling from Southern Gate Zone: 0.44% CuEq Over 114 m, within 0.28% CuEq Over 501 m

Kodiak Copper Corp. (TSX-V: KDK) (OTCQB: KDKCF) (Frankfurt: 5DD1)... READ MORE

June 30, 2022

NOVAGOLD Reports Second Quarter 2022 Financial Results

Donlin Gold’s Largest Drill Program in Over 10 Years Advancing... READ MORE

June 30, 2022

NEVADA SUNRISE CLOSES $1,500,000 PRIVATE PLACEMENT

Nevada Sunrise Gold Corporation (TSX-V: NEV) (OTC: NVSGF) announc... READ MORE

June 30, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News