The Prospector News

Lion Zone Discovery Roars Again ! – 19.6 Metres @ 3.82% CuEq

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Lion Zone Discovery Roars Again ! – 19.6 Metres @ 3.82% CuEq

 

 

 

 

 

Hole 72 delivers 19.60 metres with 3.82% CuEq
19.60 m of 1.27 g/t Au, 20.30 g/t Ag, 2.53 % Cu, 1.01 g/t Pd, 2.42 g/t Pt and 0.15% Ni

 

Power Nickel Inc. (TSXV: PNPN) (OTCBB: PNPNF) (Frankfurt: IVV) is pleased to announce the third set of assay results obtained for two more holes of the summer 2024 drilling campaign at its polymetallic Lion Zone discovery.

 

“The summer of 2024 will be remembered as an epic one regarding ongoing discovery of the Lion Zone. The westward expansion has continued to produce some fantastic results. Following up 32 metres of almost 7% CuEq with almost 40 metres of 4.19% CuEq, Hole 72 provides a continuation of our track record of success. As we push west, we are learning more about the mineralized zone and how it behaves, and our ability to track and anticipate the zone is improving. We are now routinely using downhole EM in all our new holes, giving our exploration team insight into a radius of about 200 metres. While the summer drilling program was done on a smaller 50 metre fan drilling approach, the fall and winter programs are successfully drilling 150 plus metres step outs with this technique. Look for more roars from our Lion Zone soon,” commented Terry Lynch, CEO of Power Nickel.

 

Highlights:  

 

PN-24-072 returned:


19.60 m of 1.27 g/t Au, 20.30 g/t Ag, 2.53 % Cu, 1.01 g/t Pd, 2.42 g/t Pt and 0.15% Ni
     Including:
     12.50 m of 0.31 g/t Au, 16.22 g/t Ag, 3.01 % Cu, 1.49 g/t Pd, 3.14 g/t Pt and 0.17% Ni
     which includes:
     4.50 m of 0.53 g/t Au, 32.71 g/t Ag, 6.40 % Cu, 3.74 g/t Pd, 5.73 g/t Pt and 0.35% Ni

 

PN-24-074 returned:


23.55 m of 0.15 g/t Au, 3.06 g/t Ag, 0.60 % Cu, 0.02 g/t Pd, 0.13 g/t Pt and 0.11% Ni
     Including:
     7.00 m of 0.06 g/t Au, 3.37 g/t Ag, 0.18 % Cu, 0.01 g/t Pd, 0.15 g/t Pt and 0.01% Ni
     And including:
     2.50 m of 1.27 g/t Au, 18.57 g/t Ag, 5.10 % Cu, 0.13 g/t Pd, 0.78 g/t Pt and 0.52% Ni

 

PN-24-075 returned:


19.20 m of 0.14 g/t Au, 5.45 g/t Ag, 1.04 % Cu, 0.53 g/t Pd, 1.22 g/t Pt and 0.05% Ni
     Including:
     3.40 m of 0.60 g/t Au, 13.02 g/t Ag, 0.24 % Cu, 3.60 g/t Pd, 3.38 g/t Pt and 0.01% Ni
     And including:
     3.05 m of 0.23 g/t Au, 15.29 g/t Ag, 5.31 % Cu, 0.27 g/t Pd, 4.36 g/t Pt and 0.23% Ni

 

Figure 1 below is a vertical longitudinal section, presenting the location of the recent holes drilled at the Lion Zone discovery.

 

Table 1 below presents the significant results of previously released holes, and the current assays. The complete set of results obtained demonstrates a tremendous success rate, which contributes to a continuously increasing level of confidence about the continuity of the zone.

 

As presented by Figure 1 above, two drills are on site and actively targeting expansions to the Lion Zone, continuing to expand the zone to the west (current hole PN-24-082) as well as exploring promising ground some 250m east of the Lion Discovery itself (PN-24-088). Samples will be expedited to the lab and results will be released as they are received. Results obtained to-date continue to demonstrate the lateral continuity of the zone to the west, resulting in a significant increase in size compared to the beginning of this current drill program.

 

“We are impressed with what we have discovered so far, given the impressive grades and polymetallic nature of the deposit. We are ramping up our exploration efforts using different proven geophysical and geochemical techniques and we are actively processing the data. This will accelerate the expansion and discovery process, thus enabling us to step out away from the current zone with a much higher level of confidence,”  commented Ken Williamson, Vice-President Exploration.

 

Note: Length is presented as downhole distance, as gathered from preliminary “quick logs”; true width corresponds to 60-80% of such downhole distance in function of the orientation of the hole. *CuEq Rec represents CuEq calculated based on the following metal prices (USD): 2,360.15 $/oz Au, 27.98 $/oz Ag, 1,215.00 $/oz Pd, 1000.00 $/oz Pt, 4.00 $/lb Cu, 10.00 $/lb Ni and 22.50 $/lb Co., and a recovery grade of 80% for all commodities, consistent with comparable peers.

 

Figure 2 below is a cross-section through the Lion Zone, along the holes reported in this current release, presenting the new assay results in their geological context. Core photos provide visual support, allowing appreciation of the good correlation between sulphides presence and reported polymetallic grades.

 

QAQC and Sampling

 

GeoVector Management Inc  is the consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core.

 

All samples were submitted to and analyzed at Activation Laboratories Ltd, an independent commercial laboratory for both the sample preparation and assaying. Actlabs is a commercial laboratory independent of Power Nickel with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 μm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES – 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 – Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.

 

GeoVector’s QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results.

 

The results presented in the current Press Release are complete within the mineralized intervals, but results are still pending for the top portion of both holes reported. QAQC and data validation was performed on these portions of the holes where assays are fully integrated, and no material errors were observed.

 

The Company also announces that it previously granted 600,000 options to an officer of the Company on September 9, 2024 at $0.66 per share exercisable for 5 years from the date of grant.  The Company inadvertently omitted the news release about this grant at the relevant time.

 

Qualified Person

 

Kenneth Williamson, Géo, M.Sc., VP Exploration at Power Nickel, is the qualified person who has reviewed and approved the technical disclosure contained in this news release.

 

On Remembrance Day, we honour those who gave their lives to serve our country.

 

Power Nickel would like to offer our thanks to the men and women of the Canadian Armed Forces that have served this country so honorably over our history. On this day we remember their sacrifice and salute their courage.

 

About Power Nickel Inc.

 

Power Nickel is a Canadian junior exploration company focusing on developing the High-Grade Nickel Copper PGM, Gold and Silver Nisk project into Canada’s next poly metallic mine.

 

On February 1, 2021, Power Nickel (then called Chilean Metals) completed the acquisition of its option to acquire up to 80% of the Nisk project from Critical Elements Lithium Corp. (CRE: TSXV). The NISK property comprises a large land position (20 kilometres of strike length) with numerous high-grade intercepts. Power Nickel is focused on expanding the high-grade nickel-copper PGM, Gold and Silver mineralization with a series of drill programs designed to test the initial Nisk discovery zone, the Lion discovery zone and to explore the land package for adjacent potential poly metallic deposits.

 

In addition to the Nisk project, Power Nickel owns significant land packages in British Colombia and Chile. Power Nickel is expected to reorganize these assets in a related public vehicle through a plan of arrangement as announced by the Company on October 18, 2024.

 

To obtain Power Nickel’s Corporate Presentation, please use the link below:

 

http://powernickel.com/corporate_presentation.pdf

 

 


Figure 1: Longitudinal view of the Lion Zone Discovery; assay results from PN-24-072, PN-24-074 and PN-24-075 are presented in red. The current size the of the zone is derived from observation of semi-massive to massive sulphides. An interpreted deformation corridor appears to control the presence and thickness of mineralized sulphides. (CNW Group/Power Nickel Inc.)

 

 

 


Table 1: Significant recent assay results obtained at the Lion Discovery zone (CNW Group/Power Nickel Inc.)

 

 

 


Figure 2: Section 268+25. Sulphide zone is between Red Brackets. Comprised of Massive And Semi Massive Chalcopyrite and Stringers. (CNW Group/Power Nickel Inc.)

 

Posted November 11, 2024

Share this news article

MORE or "UNCATEGORIZED"


Metalsource Mining Extends High Grade Mineralization at Depth as Silver Hill Exploration Enters Major Expansion Phase

Holes SH26-22 and SH26-23 return up to 930 g/t AgEq within broade... READ MORE

September 16, 2026

Pasinex Completes Sale of High-Grade Zinc Sulphide Material and Provides Pinargozu Operations Update

Pasinex Resources Limited (CSE: PSE) (FSE: PNX) a growing zinc-fo... READ MORE

September 16, 2026

Aya Gold & Silver Reports High-Grade Silver Exploration Results Near Pit and at Depth at Zgounder

Aya Gold & Silver Inc. (TSX: AYA; NASDAQ: AYA) is pleased to... READ MORE

September 16, 2026

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) has received results from the last four holes of a ten-hole, 1,996 metre summer drilling program in the Zavitz gold zone at the Company's 100% owned Moray gold project. In total, New Break has completed 5,372 metres of drilling in 32 drillholes in 2026. Moray is located 49 km southeast of Timmins, Ontario and 32 km northwest of the Young-Davidson gold mine operated by Alamos Gold Inc. Select results from the final four of ten holes drilled in the summer drilling program are presented below in Table 1, while drillhole collar locations are detailed in Table 2 in Appendix A. Table 1 – Moray Summer 2026 Final Drill Results Hole ID Length (m) From (m) To (m) Width (1) (m) Au Grade (2) (g/t) NBR-26-29 322.0 77.3 78.8 1.5 0.42 and 138.0 139.1 1.1 0.38 and 162.5 173.3 10.8 (3) 1.61 and 227.4 229.0 1.6 1.21 and 231.5 232.1 0.6 1.72 NBR-26-30 250.0 37.0 38.0 1.0 0.30 and 102.8 103.5 0.7 0.60 and 121.5 122.5 1.0 0.36 and 124.5 125.5 1.0 0.33 and 128.5 129.0 0.5 0.90 and 131.0 132.0 1.0 0.36 and 169.8 174.0 4.2 2.65 and 178.0 179.5 1.5 0.77 and 183.5 186.6 3.1 1.22 and 190.0 190.5 0.5 1.06 and 191.5 192.5 1.0 1.48 and 196.0 200.5 4.5 2.53 and 203.5 204.0 0.5 2.15 and 206.5 212.0 5.5 1.57 NBR-26-31 274.0 169.0 170.5 1.5 0.37 and 184.5 186.0 1.5 0.51 and 197.0 200.0 3.0 0.94 and 201.5 202.0 0.5 0.50 and 203.5 210.0 6.5 (3) 3.12 NBR-26-32 352.0 73.5 74.0 0.5 0.44 and 174.0 174.6 0.6 0.52 and 194.0 195.0 1.0 0.66 and 199.8 203.3 3.5 2.29 and 227.3 228.0 0.7 0.97 (1) Intervals are drill intersections and do not necessarily represent true widths. (2) All intervals are presented using a cut-off grade of 0.3 g/t Au and internal dilution of no more than 1.0 metres at grades less than 0.3 g/t Au and assays are not capped (see QA/QC Procedures). (3) Drill core photos shown in Appendix B. Figure 1 – Newly Reported Drillholes NBR-26-29, 30 Figure 2 – Newly Reported Drillholes NBR-26-30, 31, 32 Note: The bottom of NBR-26-30 deviated southeast and is represented in both sections. Figure 1: Section B-B1 incorporates drillholes NBR-26-06, 07, 08, 25, 26, 27, 28, 29 and part of 30. Gold mineralization extends southeast into the syenite as exhibited in NBR-26-29. NBR-26-30 is identified in both sections A-A1 and B-B1 as the drillhole was collared along section A-A1 but deviated southeast, intersecting gold mineralization in the mafic volcanics in section B-B1. Figure 2: A-A1 incorporates drillholes NBR-26-03, 04, 05, 23, 24, 30, 31 and 32. NBR-26-31 exhibits gold mineralization both within the syenite (at the contact) and within a "flow breccia" within the hematite altered mafic volcanic at the contact. NBR-26-32 is typified by blocky faulted ground with lamprophyre dykes and gold mineralization in the hematite altered mafic volcanics in a brecciated quartz vein with angular syenitic fragments. William Love, Chief Executive Officer of New Break commented, "Ongoing drilling this summer in the Zavitz gold zone continues to deliver significant gold values, with gold mineralization intercepted in every drillhole. As depicted in Figures 1 and 2, gold mineralization has been encountered predominantly within the mafic volcanics. Importantly, drillholes NR-26-29 and NR-26-32, the deepest drilled to date, demonstrate that gold mineralization extends into the syenite to the southeast at the contact with the mafic volcanics." He further noted, "The intrusive-mafic volcanic contact in the Zavitz gold zone has a distinctive magnetic high. This could be reflective of the higher proportion of iron in these mafic volcanics, which is associated with the higher gold values. This same magnetic and IP signature has been identified elsewhere in areas also believed to be along the intrusive-mafic volcanic contact. Drilling these never before tested targets with the goal of identifying gold mineralization similar to that encountered in the Zavitz zone represents the potential for significantly expanding the Moray gold discovery. There is also the belief that the Zavitz zone could represent the first of a series of stacked mineralized gold zones, which would point to the potential for a much larger gold system at depth. We plan to test this through deeper drilling directly into the Zavitz zone." About the Moray Gold Project The Moray property is located in the heart of the Ontario Abitibi greenstone belt, 49 km southeast of Timmins surrounded by a number of significant gold producing companies and existing mills (see Figure 3). The Young-Davidson gold mine operated by Alamos Gold Inc., with its 8,000 tonne per day mill is the closest and within a short trucking distance of approximately 45 km by road from Moray. The understanding of gold mineralization at Moray continues to evolve with each round of drilling. The occurrence of gold mineralization extending into the syenite to the southeast of the Zavitz zone and in the deepest drillholes is noteworthy given the presence of syenite-hosted mineralization at Young-Davidison. More recent examination of the drill core also suggests that the gold mineralization discovered to date may resemble an intrusion related style of deposit like Agnico Eagle's Upper Beaver gold deposit east of Kirkland Lake, as opposed to a structurally hosted gold system. Both Young-Davidson and Upper Beaver host multi-million ounce gold deposits. Figure 3 – Moray Location Map: Surrounding Gold Producers and Upper Beaver Gold Project Technical Content and Qualified Person The scientific and technical information contained in this news release has been reviewed and approved by Peter C. Hubacheck, P. Geo, consulting geologist to New Break, and an independent Qualified Person as defined by National Instrument 43-101. Mr. Hubacheck certifies that this news release fairly and accurately reflects the technical information and data presented. New Break conducts its exploration activities in accordance with CIM Best Practices Guidelines. QA/QC Procedures QA/QC procedures were executed to ensure all work is conducted in accordance with best practices. All drill core was sawn in half with one half of the core prepared for shipment and the other half retained for future verification. All core is under watch from the drill site to the core processing facility. Drill core is BQTK size and sample intervals range from 0.5 metres to 1.0 metres in length. Commercially prepared certified reference material ("CRM") standards and blanks were inserted with each shipment at a rate of 1 QAQC sample in every 12 core samples. Samples from New Break's 2026 Moray drilling program were analyzed at Activation Laboratories in Timmins, Ontario, which is ISO 17025 certified, by 30-gram fire assay with atomic absorption finish. Any sample assaying greater than 10.0 g/t Au was re-assayed with fire assay gravimetric analysis. Grade composite intervals over core lengths are calculated using a weighted average grade with a cut-off grade of 0.3 g/t Au. Up to 1.0 m of internal dilution (consecutive interval below cut-off grade) are included within specific geologic domains and alteration assemblages, except as otherwise noted. The composites are constrained geologically by metasomatic alteration processes sourcing from the Fiset syenite intrusion and contact mafic volcanic rocks. Elevated gold values are coincident with hematite, silica, sericite and pyrite mineralization within structurally prepared brecciated corridors flanking the intrusion. Intervals are not true widths and no top cutting has been applied to the higher gold values. About New Break Resources Ltd. New Break is a Canadian mineral exploration company focused on its Moray gold project located 49 km southeast of Timmins, Ontario, in a well-established mining camp within proximity to existing infrastructure, and 32 km northwest of the Young-Davidson gold mine, operated by Alamos Gold Inc. Shareholders are also leveraged to exploration success in Nunavut, Canada, through New Break's 20% carried interest in the Sundog gold project and ownership of 6.0 million shares of Guardian Exploration Inc. (TSXV: GX). The Company is supported by a highly experienced team of mining professionals. Appendix A – Drillhole Data and Locations Table 2 – Moray Summer 2026 Drillhole Collar Locations Hole ID Length (m) UTM Easting UTM Northing UTM Elevation Azimuth (degrees) Dip (degrees) NBR-26-29 322.0 492703 5320285 363 220 -70 NBR-26-30 250.0 492708 5320329 363 220 -47 NBR-26-31 274.0 492708 5320329 363 220 -60 NBR-26-32 352.0 492708 5320329 363 220 -70 Total 1,198.0 Coordinates are reported in UTM Zone 17 North, with units in metres. Figure 4 – Zavitz Gold Zone – Surface Traces of 2025 and 2026 Drillholes. All of the drilling at Moray has been completed by Enviro North Exploration Inc. out of Sturgeon Falls, Ontario. Drilling in the Zavitz gold zone is shown in figure 4, with the 1,996 metres in 10 holes drilled this summer depicted in red, the 2,807 metres in 20 holes drilled from January to April 2026 shown in blue and the 1,817 metres in 8 holes drilled in 2025 shown in black. In total, 6,620 metres in 38 drillholes have been completed in the Zavitz gold zone, while New Break has completed a total of 5,372 metres in 32 drillholes of our planned 2026, 10,000 metre drilling program. Appendix B – Drill Core Photos From NBR-26-29 and NBR-26-31

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) ha... READ MORE

September 16, 2026

New Found Gold Declares Commercial Production at Hammerdown Gold Mine

New Found Gold Corp. (TSX: NFGC) (NYSE American: NFGC) is pleased... READ MORE

September 16, 2026

Copyright 2026 The Prospector News