The Prospector News

LAURION INTERSECTS 2.44 G/T AU AND 1.58% ZN OVER 1.95M WITHIN A MINERALIZED INTERCEPT OF 5.95M AT 0.85 G/T AU AND 0.54% ZN; AS PART OF THE DEPTH EXTENSION OF THE A-ZONE AT ISHKODAY AU-ZN-CU-AG PROJECT

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

LAURION INTERSECTS 2.44 G/T AU AND 1.58% ZN OVER 1.95M WITHIN A MINERALIZED INTERCEPT OF 5.95M AT 0.85 G/T AU AND 0.54% ZN; AS PART OF THE DEPTH EXTENSION OF THE A-ZONE AT ISHKODAY AU-ZN-CU-AG PROJECT

 

 

 

 

 

LAURION Mineral Exploration Inc. (TSX-V: LME) (OTCPINK: LMEFF) is pleased to announce assay results for three new diamond drill holes testing the continuity at depth of the northeastern portion of the A-Zone. The A-Zone is located along the 6 km long Au-Zn-Cu-Ag mineralized trend at the Corporation’s Ishkoday Project, located near Beardmore, Ontario.

 

The current assay results have demonstrated that the northeastern part of the A-Zone gold- and zinc-rich synvolcanic mineralization extends to depth over more than 240 m vertical. The drilling also identified a new mineralized structure, associated with the Bezhik shear zone, bordering the northeastern edge of the A-Zone.

 

The depth extension of the A-Zone returned the following highlights (see table for full results):

  • LBX22-063 from 173.5 to 175.25 m: 1.75 m (1.47 m true width (TW)) @ 0.52 g/t Au and 1.82% Zn.
  • LBX22-064 from 234 to 239.95: 5.95 m (4.83m TW) @ 0.85 g/t Au, 0.54% Zn and 0.20% Cu. Including 1.95m (from 238 to 239.95m) @ 2.44 g/t Au, 1.58% Zn and 0.56% Cu.
  • LX22-065 from 282 to 290 m: 8 m (6.69 m TW) @ 0.39 g/t Au, 2.48% Zn and 0.32% Cu. Including 1.00 m (from 289 to 290m) @ 1.68 g/t Au, 6.26% Zn and 1.12% Cu.

 

The new mineralized structure in association with the Bezhik shear returned the following highlights:

  • LBX22-065 from 175.3 to 178.10 m: 2.80 m (2.24 m TW) @ 2.12 g/t Au, 3.07% Zn and 0.34% Cu.

 

This new mineralized area is open to the southwest and the A-Zone remains open at depth. The extensions are further tested by LBX22-077, LBX22-078, LBX22-079 and LBX22-080 (assay pending).

 

Current Drilling and Objectives

  • A total of 10,191 m in twenty-seven diamond drill holes have been drilled to date with assays pending for eight drill holes in the McLeod Zone and six drill holes between the A-Zone and McLeod Zone, in which all drill holes have intercepted the stacked veins.
  • The drill is currently in the McLeod zone to test its continuity to the southwest where the stacked veins coincide with a large magnetic high anomaly. Seven drill holes are planned in this zone.
    • Further drilling is also planned to test: (i) the western connection between the A-Zone and the McLeod Zone; and (ii) The mineralized gold Joe vein in McLeod Zone; identified through surface sampling.

 

A-Zone Assay Results Highlights

 

Hole ID From To Core Length True Width* Au Zn Cu Ag
(m) (m) (m) (m) (g/t) (%) (%) (g/t)
LBX22-063 10.50 14.90 4.40 3.80 0.15 0.72 0.03 1.92
LBX22-063 100.00 108.50 8.50 7.22 0.19 0.09 0.03 7.22
LBX22-063 173.50 175.25 1.75 1.47 0.52 1.82 0.20 12.79
including 174.45 175.25 0.80 1.02 3.18 0.34 23.70
LBX22-064 234.00 239.95 5.95 4.83 0.85 0.54 0.20 11.72
including 238.00 239.95 1.95 2.44 1.58 0.56 33.95
LBX22-064 275.30 276.00 0.70 0.56 0.37 4.07 0.31 14.00
LBX22-065 15.40 16.55 1.15 0.92 0.86 1.89 0.06 5.35
LBX22-065 175.30 178.10 2.80 2.24 2.12 3.07 0.34 20.14
LBX22-065 218.20 219.70 1.50 1.26 0.54 2.51 0.23 9.86
LBX22-065 282.00 290.00 8.00 6.69 0.39 2.48 0.32 13.96
including 282.00 287.00 5.00 0.26 2.60 0.26 12.72
including 289.00 290.00 1.00 1.68 6.26 1.12 39.50
* True widths are calculated based on an average dip of 70° towards N330° for the mineralized zones

 

Please refer to the schematic sections shown in Figure1, Figure 2, Figure 3 and Figure 4.

 

Sampling Analysis and Laboratory

 

Samples from the 2022 drilling were cut and sent for analysis. Preparation and analysis were completed at the Actlabs (ISO 9001:2015) laboratory in Thunder Bay, Ontario. Actlabs is an internationally recognized laboratory that provides geochemical sample preparation, analytical procedures and data management solutions.

 

LAURION uses a quality assurance/quality control program that monitors the chain of custody of samples and includes the insertion of blanks (5% of the announced results), duplicates (3% of the announced results) and standard reference material (5% of the announced results) in each batch of samples sent for analysis. Drill core is photographed, logged and cut in half, with one half retained in a secured location for verification purposes and one half shipped for analysis.

 

The entire sample is crushed to 80% passing 2 mm and a riffle split of 250 grams is taken and pulverized to 95% passing 105 µm (RX1). Samples are analyzed by four-acid digestion/ICP-MS package for 36 elements (1F2). Additionally, samples are analyzed for Au using a firing assay from a 50-gram pulp (1A2B-50). Overlimit samples values for zinc (>1%) and Pb (>0.5%) are re-assayed using a four-acid digestion overlimit method with ICP-AES 9 (8-4 Acid over limit).

 

No QA/QC issues were noted with the results reported herein.

 

Qualified Person

 

The technical contents of this release were reviewed and approved by Jean-Philippe Paiement, PGeo, MSc, a consultant to LAURION, and a qualified person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.

 

About LAURION Mineral Exploration Inc. 

 

The Corporation is a junior mineral exploration and development company listed on the TSXV under the symbol LME and on the OTCPINK under the symbol LMEFF. The Corporation currently has 252,384,022 outstanding shares, of which approximately 81% of LAURION’s issued and outstanding shares are owned and controlled by Insiders who are eligible investors under the “Friends and Family” categories.

 

LAURION’s emphasis is on the development of its flagship project, the 100% owned mid-stage 47 km2 Ishkoday Project, and its gold-silver and gold-rich polymetallic mineralization with a significant upside potential. The mineralization on Ishkoday is open at depth beyond the current core-drilling limit of -200 m from surface, based on the historical mining to a -685 m depth, in the past producing Sturgeon River Mine. The Brenbar Property, which was acquired in 2020 and is contiguous with the Ishkoday Property, hosts the historic Brenbar Mine. LAURION believes the mineralization to be a direct extension of mineralization from the Ishkoday Property.

 

Posted May 31, 2022

Share this news article

MORE or "UNCATEGORIZED"


SIGMA LITHIUM LOADS 22,000 TONNE SHIPMENT OF TRIPLE ZERO GREEN LITHIUM CONCENTRATE TO GLENCORE AT A PREMIUM PRICE

HIGHLIGHTS Sigma Lithium announces that it will commence loading ... READ MORE

November 27, 2023

VIZSLA SILVER REPORTS ADDITIONAL HIGH-GRADE INTERCEPTS ON THE COPALA AND COPALA 2 STRUCTURES

Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) ... READ MORE

November 27, 2023

Geomega Obtains $2.04M in Funding from NGen for Rare Earths Recycling Demonstration Plant

Geomega Resources Inc. (TSX-V: GMA) (OTC: GOMRF), a developer of ... READ MORE

November 27, 2023

Lavras Gold Drills 204 metres Grading 1.0 g/t gold starting at a drill hole depth of 31 metres at its Fazenda do Posto Discovery, LDS Project in Southern Brazil

Hole 23FP006 includes 65 metres at 1.9 g/t gold and including 10 ... READ MORE

November 27, 2023

Endeavour Silver Continues to Intersect High-Grade Silver-Gold Mineralization at the Bolañitos Operation

Endeavour Silver Corp. (TSX: EDR) (NYSE: EXK) is pleased to rep... READ MORE

November 27, 2023

Copyright 2023 The Prospector News