The Prospector News

HIGH-GRADE CESIUM RESULTS CONTINUE IN LATEST DRILLING PHASE

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

HIGH-GRADE CESIUM RESULTS CONTINUE IN LATEST DRILLING PHASE

 

 

 

 

 

Major Highlights

  • High-Grade Cesium, Lithium, and Tantalum discoveries at flagship Case Lake Project
  • Significant mineralization in drill holes discovered at shallow intercepts of 3.9 meters at reaching up to 12.72% Cesium oxide (Cs₂O) concentrations
  • Strategic Phase III drilling program to commence in Q4 2024
  • Successful site visit conducted with strategic partner Winsome Resources

 

Power Metals Corp (TSX-V: PWM) (FRANKFURT: OAA1) (OTCQB: PWRMF) is pleased to report significant progress in its 2024 Phase II drill program at the Company’s 100%-owned Case Lake Project in northeastern Ontario.

 

Recent results indicate continued high-grade mineralization of cesium, lithium, and tantalum, underscoring the project’s strong exploration potential.  The latest assay results from our targeted drilling at the West Joe Zone confirm additional high-grade cesium oxide (Cs₂O) mineralization, reaching up to 12.72% in shallow intercepts.

 

These results underscore the robust potential of the CLP as a high-grade, multi-element resource. The success of the Phase II program is highlighted by notable intercepts, including:

  • Hole PWM-24-210: 3.20 meters averaging 5.06% Cs₂O in a pollucite-rich zone
  • Hole PWM-24-211: 3.90 meters averaging 7.83% Cs₂O
  • Hole PWM-24-212: 4.00 meters averaging 7.70% Cs₂O (Figure 1-4)

 

These strong results reinforce the Case Lake Project’s potential as a strategic source of cesium and other critical elements essential to high-tech industries. The analytical results from drilling at the CLP continues to display significant mineralization at West Joe with the following highlights:

 

WEST JOE HIGHLIGHTS:

  • PWM-24-210: 9.09m at 0.98% Li2O, 2.25% Cs₂O and 367 ppm Ta from 11.78m
    • Including 3.2m @ 1.39 % Li2O, 5.06% Cs₂O and 634 ppm Ta from 13.80m
    • Including 1.0m @ 2.42 % Li2O, 8.78% Cs₂O and 426 ppm Ta from 16.00m
  • PWM-24-211: 7.90m @ 1.50% Li2O, 4.05% Cs₂O and 423 ppm Ta from 19.20m
    • Including 3.9m @ 1.43% Li2O, 7.83% Cs₂O and 410 ppm Ta from 20.07m
    • Including 1.0m @ 0.59% Li2O, 12.72% Cs₂O and 521 ppm Ta from 22.00m
  • PWM-24-212: 7.63m at 0.75% Li2O, 4.09% Cs₂O and 249 ppm Ta from 25.50m
    • Including 4.0m @ 1.01 % Li2O, 7.70% Cs₂O and 321 ppm Ta from 28.00m
    • Including 2.0m @ 1.08% Li2O, 10.88% Cs₂O and 371.5 ppm Ta from 29.00m

 

Haydn Daxter, Power Metals CEO commented: “We’re extremely pleased by the momentum generated from our Phase II drilling program, which continues to validate the world-class potential of the Case Lake Project,”

 

“These impressive results reinforce our confidence in this resource, and we eagerly anticipate further findings in the weeks ahead as we transition into Phase III drilling to close out our extensive 2024 exploration program.”

 

“It was also a privilege to conduct an on-site review with Chris Evans, a valued partner and key member of our Cesium Advisory Committee and Managing Director of Winsome Resources, to assess this exciting project firsthand and discuss technical insights,” said Haydn Daxter, CEO of Power Metals.

 

Johnathan More, Chairman of Power Metals, added, “Power Metals is breaking new ground with our high-grade cesium discoveries at Case Lake, a project that continues to exceed our expectations. As we advance into the next phase of development, we are setting the stage for a promising year ahead and a strengthened position in the specialty metals market.”

 

Drilling produced strong pollucite, spodumene, and tantalum mineralization in PWM-24-210, 211, 212, and 218 with successful intersections of consistent high-grade lithium, cesium, and tantalum (LCT) mineralization. These intercepts confirm the continuation of the West Joe mineralization trend both up and down dip of previously reported drillholes PWM-18-126, 22-147, and 24-171 (Figures 2-4).  Drillholes PWM-210, 211, and 212 reported 2.25 to 4.09 % Cs2O, 0.75 to 1.5 % Li2O, and 249 to 367 ppm Ta in 7.63 to 9.10 meters thick pegmatites. The rich core of the mineralization in PWM-24-210, 211, & 212 is characterized by a 3.2 to 4.0 meters thick high-grade zone that on average contains 6.86% Cs2O, 1.27% Li2O, and 455 ppm Ta.

 

Drillhole PWM-24-218 intersected two separate pegmatite intervals that contain 0.62% Li2O and 257 ppm Ta over 4.05 meters (zone 1) along with 1.35% Li2O and 350 ppm Ta over 5.35 meters (zone 2) respectively. The core of the pegmatite mineralization in the second interval contains anomalous cesium, lithium, and tantalum mineralization of 0.68% Cs2O, 1.70% Li2O and 401 ppm Ta across the 1.7 meter interval, indicating continuation of a highly fractionated zone containing cesium mineralization at depth.

 

Drill core from PWM-24-214 displays a 6.9 meters thick pegmatite interval that contains tantalum mineralization of 283 ppm Ta with low-grade lithium and cesium. In addition to high-grade cesium mineralization in pollucite at West Joe, the apparent tantalum-only nature of the mineralization in PWM-24-214 is an indication of the extreme level of fractionation and have been identified in pegmatites close to and within Main Zone across the CLP.

 

DRILLING

 

The Company is due to commence its 2024 Phase III drilling program in mid-November to further add value to the exploration work to date during 2024 at the CLP. We anticipate that drilling will run through to the end of the year with the continued delineation of cesium at West Joe and Main Zone. The Company expects to announce its drill contractor and rig mobilization in the coming weeks. The Company eagerly awaits additional assay results from the lab from our 2024 Phase II drilling in the coming weeks.

 

WINSOME SITE VISIT

 

The Company recently conducted a site visit with two members of its Cesium Advisory Committee (Haydn Daxter, CEO and Chris Evans, Director of Power Metals and Managing Director of Winsome Resources ASX: WR1). The visit was based on a review of all drilling to date at West Joe and Main Zone in targeting high-grade cesium. The review also included a technical overview of the project prior to commencing initial planning for the studies due to commence towards the end of 2024 and into 2025.

 

 

Table 1 – Drill Collar Table (Bold Hole ID’s reported in the announcement)
Hole ID Easting Northing Elevation Hole
Depth
(m)
Dip Azimuth
NAD83
From (m) To (m) Significant Intersections
NAD83 NAD83 MASL Interval (m) Cs2O (%) Li2O % Ta (ppm)
West Joe 
PWM-24-
207
576312 5431119 344 71 -45 170 16.35 25.00 8.65 5.74 1.60 378
including 3.0m @ 15.86% Cs2O, 1.67% Li2O, & 119 ppm Ta from 18.35m

including 1.0m @ 22.58% Cs2O, 1.72% Li2O, & 130 ppm Ta from 18.35m

PWM-24-
208
576306 5431120 344 71 -45 170 16.38 23.40 7.02 1.77 1.25 355
including 3.0m @ 3.98 % Cs2O, 0.7 % Li2O, & 457 ppm Ta from 19.0m
PWM-24-
209
576308 5431125 344 71 -45 170 20.07 25.78 5.71 1.42 1.19 287
including 2.5m @ 3.18 % Cs2O, 1.37 % Li2O, & 456 ppm Ta from 22.5m
PWM-24-
210
576301 5431115 344 71 -45 170 11.78 20.87 9.09 2.25 0.98 367
including 3.2m @ 5.06% Cs2O, 1.39% Li2O, & 634 ppm Ta from 13.80m

including 1.0m @ 8.78% Cs2O, 2.42% Li2O, & 426 ppm Ta from 16.00m

PWM-24-
211
576319 5431122 350 74 -45 170 19.20 27.10 7.90 4.05 1.50 423
including 3.9m @ 7.83% Cs₂O, 1.43% Li2O, and 410 ppm Ta from 20.07m

including 1.0m @ 12.72% Cs₂O, 0.59% Li2O, and 521 ppm Ta from 22.00m

PWM-24-
212
576325 5431128 349 71 -45 170 25.50 33.13 7.63 4.09 0.75 249
including 4.0m @ 7.70% Cs₂O, 1.01 % Li2O, and 321 ppm Ta from 28.00m

including 2.0m @ 10.88% Cs₂O, 1.08% Li2O, and 372 ppm Ta from 29.00m

PWM-24-
213
576329 5431124 348 90 -45 170 24.30 31.75 7.45 0.14 1.60 360
including 5.9m @ 0.17% Cs₂O, 2.00% Li2O and 392 ppm Ta from 24.30m
PWM-24-
214
576285 5431136 348 90 -45 170 34.85 41.75 6.90 0.11 0.12 283
PWM-24-
215
576277 5431130 349 81 -45 170 awaiting assay results
PWM-24-
216
576273 5431160 345 72 -45 170 awaiting assay results
PWM-24-
217
576316 5431115 350 71 -45 170 awaiting assay results
PWM-24-
218
576316 5431143 345 83 -51 170 31.00 35.05 4.05 0.12 0.62 257
including 2.8m @ 0.16% Cs₂O, 0.89% Li2O, and 235 ppm Ta from 31.00m
46.95 52.3 5.35 0.26 1.35 350
including 1.7m @ 0.68% Cs₂O, 1.70% Li2O, and 401 ppm Ta from 31.00m
PWM-24-
219
576339 5431161 339 81 -45 170 awaiting assay results
PWM-24-
220
576337 5431124 344 62 -45 170 awaiting assay results
PWM-24-
221
576321 5431116 349 71 -45 170 awaiting assay results
PWM-24-222* 576302 5431120 345 30 -45 170 awaiting assay results
PWM-24-223* 576316 5431114 346 30 -45 170 awaiting assay results
PWM-24-224* 576309 5431125 344 30 -45 170 awaiting assay results
PWM-24-225* 576311 5431106 34 30 -56 170 awaiting assay results
PWM-24-
226
576440 5431204 338 199 -45 170 awaiting assay results
PWM-24-227* 576317 5431115 345 30 -45 170 awaiting assay results
PWM-24-
228
576502 5431365 342 252 -45 170 awaiting assay results
PWM-24-
229
576617 5431200 341 252 -45 170 awaiting assay results
Main Zone
PWM-24-
230
578217 5431598 353 122 -45 147 awaiting assay results
PWM-24-
231
578283 5431651 350 111 -45 147 awaiting assay results
PWM-24-
232
578305 5431659 347 71 -50 147 awaiting assay results
PWM-24-
233
578329 5431716 344 150 -45 150 awaiting assay results
PWM-24-
234
578145 5431515 352 111 -45 150 awaiting assay results
PWM-24-
235
578273 5431638 355 72 -45 147 awaiting assay results
* 2024 Phase II HQ holes for metallurgical testing

 

Sampling and QAQC Procedures

 

Samples were taken across every pegmatite and 1.5 meter into the barren host rock on either side of dykes. Sample lengths were around 1-metre NQ (48 mm) and HQ (64 mm) core diameter, though individual sample length was determined based on internal zoning of the dykes and the locations of their contacts. The sampled core was cut in half with one half being sent for analysis and the other half remaining in the box for reference. All core is stored at Power Metals core storage facility in Cochrane, Ontario. Each sample was put into its own plastic sample bag with a sample tag and closed with zip ties. About 15% of the samples submitted SGS Canada (“SGS”) for analysis were QAQC samples that were inserted into the sample stream and consist of a high- and low-grade lithium, Tantalum, and Cesium standards, blank material, and duplicates. Samples were dropped at SGS Cochrane, in Ontario. Samples submitted to SGS were prepped, crushed, and pulverized in Sudbury and were subsequently sent to SGS Burnaby and SGS Lakefield for multi element analysis using sodium peroxide fusion ICP-AES/ICP-MS and borate fusion XRF. All cesium results above 1% were analyzed using 4-Acid digest AAS at SGS Lakefield.

 

Case Lake Property

 

The Case Lake Property is located 80 km east of Cochrane, northeastern Ontario close to the Ontario – Quebec border. The Property consists of 585 cell claims in Steele, Case, Scapa, Pliny, Abbotsford and Challies townships, Larder Lake Mining Division. The Property is 10km by 9.5km in size with 14 granitic domes. The Case Lake pegmatite swarm consists of six spodumene dykes known as the North, Main, South, East and Northeast dykes on the Henry Dome, and the West Joe dyke on a new dome, collectively forming mineralization trend that extends for approximately 10km (Figure 6).

 

Power Metals have completed several exploration campaigns that have led to the discovery and expansion of new and historic spodumene bearing LCT pegmatites at Case Lake. The Company has drilled a total of 22,231 meters of core between 2017 and 2024 at the Property. The Case Lake Property is owned 100% by Power Metals Corp. A National Instrument 43-101 Technical Report has been prepared on Case Lake Property and filed on July 18, 2017 (Figure 6).

 

Pelletier Property

 

The Pelletier Property is located 50km south of Hearst, northeastern Ontario close to a network of forestry roads. The Property consists of 337 mineral claims that account for a total of 7000 hectares in Franz, Roche, Scholfield, and Talbot townships in the Porcupine mining division. The Pelletier Project is characterized by LCT prospective S-type pegmatitic granites intruding into metasedimentary and amphibolite of the Quetico at or near Archean terrane boundary between the Quetico and Wawa sub-provinces (Figure 6).

 

Decelles Property

 

The Decelles Property contains 669 claims, covering 38,404 hectares of LCT prospective ground near the mining centers of Val-dÓr and Rouyn-Noranda, approximately 600km from Montreal. Power Metals acquired the Decelles and Mazerac properties from Winsome Resources in 2023 in a deal that allowed Winsome to increase its stake to 19.59% (Refer to press release announced on August 24, 2023). The geology of Decelles property is part of the Archean Pontiac sub-province where S-type LCT prospective, pegmatite bearing, granitic Decelles Batholith intrudes into metasedimentary units of the Pontiac Group. Spodumene and Beryl bearing pegmatites have been reported historically within the Pontiac sub-province in association with S-type garnet-muscovite granite. The Decelles property is adjacent to Vision Lithium’s Cadillac property where discovery of high-grade lithium pegmatites was reported in 2022 (Figure 6).

 

Mazerac Property

 

The Mazerac Property is located approximately 30 km east of Power Metals’ Decelles property near well-established mining camps in the Abitibi region of Canada and is accessible by network of mining-grade forestry roads. The Mazerac property contains 259 claims that cover 14,700 hectares of LCT prospective ground near the mining center of Val-dÓr and Rouyn-Noranda. The regional geology of Mazerac is similar to Decelles where S-type LCT prospective, pegmatite bearing, granites of Decelles Batholith intrude into metasedimentary units of the Pontiac Group. Spodumene and Beryl bearing pegmatites have been reported historically within the Pontiac sub-province in association with S-type garnet-muscovite granite (Figure 6).

 

Pollucite and Cesium

 

Pollucite is a rare mineral that hosts high grade cesium and is associated with highly fractionated, rare element pegmatites. The main source of cesium known globally is pollucite (Cs,Na)₂(Al₂Si₄O₁₂)•2H₂O, (https://www.gov.mb.ca/iem/geo/industrial/pollucite.html). Currently the Tanco mine in Manitoba, Canada is the only operating cesium deposit and holds over 60% of the known reserves globally.

 

Scientific and Technical Disclosure

 

The scientific and technical disclosure included in this news release has been reviewed and approved by Amanuel Bein, P.Geo., Vice President of Exploration for Power Metals, a Qualified Person under National Instrument 43-101 Standards of Disclosure of Mineral Projects.

 

Power Metals

 

Power Metals Corp. is a diversified Canadian mining company with a mandate to explore, develop and acquire high quality mining projects. We are committed to building an arsenal of projects in both lithium and high-growth specialty metals and minerals. We see an unprecedented opportunity to supply the tremendous growth of the lithium battery and clean-technology industries.

 

 


Figure 1 – Plan View Map of Phase II Drilling Collars displaying results as highlighted in this announcement (CNW Group/Power Metals Corp.)

 

 

 


Figure 2 – Cross Section Map of PWM-24-210 from Phase II Drilling at West Joe (CNW Group/Power Metals Corp.)

 

 

 


Figure 3 – Cross Section Map of PWM-24-211 from Phase II Drilling at West Joe (CNW Group/Power Metals Corp.)

 

 

 


Figure 4 – Cross Section Map of PWM-24-212 from Phase II Drilling at West Joe (CNW Group/Power Metals Corp.)

 

 

Figure 5 – Power Metals CEO Haydn Daxter (right) on site with Winsome MD and Power Metals Director Chris Evans (left) (CNW Group/Power Metals Corp.)

 

 

 


Figure 6 – Power Metals Corp Project Locations Map in Ontario and Quebec Canada (CNW Group/Power Metals Corp.)

 

Posted October 31, 2024

Share this news article

MORE or "UNCATEGORIZED"


Endeavour Reports Q3-2024 Results

Endeavour Mining (LSE:EDV) (TSX:EDV) (OTCQX:EDVMF) is pleased to announce its operating and financia... READ MORE

November 7, 2024

Lundin Gold Reports Additional High-Grade Drilling Intercepts at FDNS and Updates on Conversion Drilling Program

Lundin Gold Inc. (TSX: LUG) (Nasdaq Stockholm: LUG) (OTCQX: LUGDF) is pleased to announce addition... READ MORE

November 7, 2024

Canada Nickel Intersects Massive Sulphide at Bannockburn Project

Canada Nickel Company Inc. (TSX-V: CNC) (OTCQX: CNIKF) is pleased to announce it has intersected ... READ MORE

November 7, 2024

Bravo's Luanga PGM+Au+Ni Deposit Continues to Deliver Significant Mineralized Grades & Thicknesses

Bravo Mining Corp. (TSX-V: BRVO) (OTCQX: BRVMF),  received assay results from twenty-five diamond ... READ MORE

November 7, 2024

Labrador Iron Ore Royalty Corporation - Results for the Third Quarter Ended September 30, 2024

To the Holders of Common Shares of Labrador Iron Ore Royalty Corporation (TSX:LIF)   The Directors... READ MORE

November 7, 2024

Copyright 2024 The Prospector News