The Prospector News

Emerita Intersects 25.1 Meters Grading 0.3% Copper, 1.5% Lead, 6.0% Zinc, 0.74 G/T Gold and 82.0 G/T Silver at La Romanera Deposit, Awards Contract to Prepare Independent Resource Estimate

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Emerita Intersects 25.1 Meters Grading 0.3% Copper, 1.5% Lead, 6.0% Zinc, 0.74 G/T Gold and 82.0 G/T Silver at La Romanera Deposit, Awards Contract to Prepare Independent Resource Estimate

 

 

 

 

 

Emerita Resources Corp. (TSX-V: EMO) (OTCQB: EMOTF) (FSE: LLJA) is pleased to announce additional assay results from the 2022 delineation drilling at the La Romanera Deposit at its wholly owned Iberian Belt West project. IBW hosts three previously identified massive sulphide deposits: La Infanta, La Romanera and El Cura. All deposits are open for expansion along strike and at depth.

 

Emerita has received assay results for 7 additional drill holes from the 2022 delineation drilling at the La Romanera Deposit. Presently, there are 14 drills on La Romanera deposit delineation and 1 rig continues to drill at La Infanta. Six drilling companies are engaged in the program. The Company has currently completed 100 drill holes at La Romanera, with another 14 in progress. At La Infanta, 77 drill holes have been completed to date and 1 hole is in progress. A video of our 14 drill rigs operating on La Romanera deposit can be seen at the link below:

 

https://www.youtube.com/watch?v=xfgN9IfqQPw

 

According to David Gower, P.Geo, CEO of Emerita, “The Company is planning to complete the maiden NI 43-101 Technical Report and Mineral Resource estimate for IBW around the end of Q1 or early Q2 2023. We expect to lock in the databases for both La Romanera and La Infanta deposits for this estimate between January 31 and February 15, 2023 so the resource modeling can proceed. We plan to complete approximately 35 more holes by that time, most of these are short holes targeting the upper part of the deposit or specific areas where drill spacing should be improved. It is expected both deposits will remain open for further expansion when we lock the database for this estimate.”

 

Emerita has awarded the contract to complete the independent mineral resource estimate and Technical Report to Wardell Armstrong International (“WAI”). WAI is a wholly owned subsidiary of Wardell Armstrong LLP, a British multidisciplinary Environmental, Engineering and Mining consultancy, first established in 1837, and now operating from 13 offices in the UK and internationally. WAI has a strong client list, including companies and organisations from the private and public sectors, as well as many major financial institutions. WAI has been involved in multiple LSE Main Board and AIM listings as well as NI 43-101 Technical Reports for TSX and Competent Person’s Reports for ASX listed companies. WAI has a long track record of providing high quality technical services to the mining industry worldwide and has significant experience with deposits and operations of the Iberian Pyrite Belt over the last 30 years.

 

Assay results have been received from 7 drill holes (LR016, LR040, LR044, LR046, LR047, LR052 and LR057) at the La Romanera deposit (Figures 1, 2 and 3 and Table 1). These intercepts are located on the east and west edges of the footprint of the historical boreholes, between -100 and -250 m vertical elevation.

 

Drill Hole LR016: The Upper Lens was intersected at 260.7 m down the hole and comprises 3.8 m of stockwork mineralization grading 0.2 % Cu; 3.2 % Pb; 0.6 % Zn; 1.08 g/t Au and 123 g/t Ag. The Lower Lens was intercepted at 288.0 m, 23 m below the Upper Lens and encountered 40.2 m of massive sulphide mineralization grading 0.3% Cu; 1.5 % Pb; 4.3 % Zn; 1.36 g/t Au and 75.5 g/t Ag, including 7.0 m grading 0.3 % Cu; 2.6 % Pb; 5.9 % Zn; 2.78 g/t Au and 110.5 g/t Ag. 

 

Drill Hole LR040:   The Lower Lens was intercepted at 485.4 m down hole, about 350 m below surface. Mineralization is characterized by massive sulphide, primarily pyrite and encountered 20.6 m grading 0.3 % Cu; 1.0 % Pb; 0.6 % Zn; 1.54 g/t Au and 62.3 g/t Ag.

 

Drill Hole LR044:   The Upper Lens was intercepted at 288.3 m down the hole. It intercepted 4.4 m grading 0.7 % Cu; 6.1 % Pb; 9.2 % Zn; 2.14 g/t Au and 207.3 g/t Ag. This hole also intercepted the Lower Lens, which comprised primarily massive pyrite with low base and precious metal content.

 

Drill Hole LR046:   The first intercept for hole LR046 is located approximately 250 m vertically below surface. The mineralization was encountered at 308.2 m down the hole comprising 7.5 m of massive sulphide grading 0.7 % Cu; 0.5 % Pb; 0.4 % Zn; 2.24 g/t Au and 132.0 g/t Ag. This would correspond to the Upper Lens. The Lower Lens appears 3.7 m after the Upper Lens. It intercepted 22.2 m of massive sulphide mineralization grading 1.0 % Cu; 0.45 g/t Au and 72.0 g/t Ag. 18.2 m below the Lower Lens, the hole intercepts 2.2 m of stockwork mineralization grading 1.4 % Cu; 0.5 % Pb; 1.6 % Zn; 0.82 g/t Au and 37.9 g/t Ag.

 

Drill Hole LR047:   This hole intercepts the Lower Lens only. The hole encountered 31.6 m of sulphide mineralization at 307 m down the hole. The most abundant mineral is pyrite. The intercept returned 0.2 % Cu; 0.7 % Pb; 3.9 % Zn; 0.39 g/t Au and 46.0 g/t Ag.

 

Drill Hole LR052:   This hole encountered two stockwork zones with sub economic grades, at 360.2 m and 374.6 m. the first stockwork zone is 6.3 m grading 0.6 % Cu; 0.51 g/t Au and 28.6 g/t Ag. The second stockwork zone is 4.2 m grading 0.9 % Cu; 0.32 g/t Au and 8.5 g/t Ag.

 

Drill Hole LR057:   The Upper Lens was intersected at 301.4 m down the hole and comprises 26.0 m grading 0.3 % Cu; 2.2 % Pb; 0.4 % Zn; 1.71 g/t Au and 204.8 g/t Ag, including 7.6 m grading 0.2 % Cu; 4.7 % Pb; 1.0 % Zn; 1.84 g/t Au and 277.1 g/t Ag. The Lower Lens was intercepted at 328.8 m, 1.4 m below the Upper Lens and encountered 25.1 m grading 0.3 % Cu; 1.5 % Pb; 6.0 % Zn; 0.74 g/t Au and 82.0 g/t Ag, including 6.6 m grading 0.3 % Cu; 2.6 % Pb; 9.7 % Zn; 0.89 g/t Au and 125.1 g/t Ag. 

 

 Figure 1: Plan map showing drill hole locations

 

Figure 2: Vertical Longitudinal projection of the Upper Lens at the La Romanera Deposit

 

Figure 3: Vertical Longitudinal projection of the Lower Lens at La Romanera Deposit

 

 

 

DDH Easting Northing Elevation azimuth dip depth
(m)
FROM TO Width
(m)
Cu_% Pb_% Zn_% Au_g/t Ag_g/t
LR016 646748 4172458 152 181 -74 337.0 260.7 264.5 3.8 0.2 3.2 0.6 1.08 123.7
LR016             288.0 328.2 40.2 0.3 1.5 4.3 1.36 75.5
incl.             288.0 295.0 7.0 0.3 2.6 5.9 2.78 110.5
LR040 646716 4172736 146 200 -53 512.6 485.4 506.0 20.6 0.3 1.0 0.6 1.54 62.3
LR044 646660 4172585 152 196 -53 356.4 288.3 292.7 4.4 0.7 6.1 9.2 2.14 207.3
LR046 646660 4172585 152 196 -60 386.0 308.2 315.7 7.5 0.7 0.5 0.4 2.24 132.0
LR046             319.4 341.6 22.2 1.0 0.1 0.0 0.45 72.0
LR046             359.8 362.0 2.2 1.4 0.5 1.6 0.82 37.9
LR047 646845 4172507 154 198 -59 360.5 307.0 338.5 31.6 0.2 0.7 3.9 0.39 46.0
LR052 646660 4172585 152 198 -65 412.7 360.2 366.5 6.3 0.6 0.1 0.1 0.51 28.6
LR052             374.6 378.8 4.2 0.9 0.1 0.0 0.32 8.5
LR057 646845 4172507 154 199 -65 372.0 301.4 327.4 26.0 0.3 2.2 0.4 1.71 204.8
incl.             319.0 326.6 7.6 0.2 4.7 1.0 1.84 277.1
LR057             328.8 353.8 25.1 0.3 1.5 6.0 0.74 82.0
incl.             343.9 350.5 6.6 0.3 2.6 9.7 0.89 125.1

Table 1: Drill hole data

 

Quality Assurance/Quality Control

 

Drilling at La Romanera is HQ size and core is placed into core trays at the drill site and transported directly from the site to Emerita’s coreshack (15KM) from La Romanera and (8KM) from La Infanta. Once the cores are received at Emerita’s coreshack they are photographed and geotechnical logging is performed. Geological, mineralogical and structural logging follows and mineralized zones are identified. The samples are marked every 1m or less, and respecting lithological contacts, with most of the samples 1.0m long. The zone immediately above and below the mineralized zones are also sampled. Core samples are sawed in half and half of the core is returned to the core tray for future reference. Once the core samples are cut, bagged and tagged, they are shipped to the ALS laboratory in Seville by Emerita personnel where sample preparation is done. In Seville, ALS performs the mechanical preparation of the samples and then the pulps are sent to ALS Ireland (ICP) and ALS Romania (fire assay). The analysis at ALS Lab corresponds to the ME-ICPore (19 elements) package, together with the Au-AA23 fire assay (Gold). ALS is independent of Emerita.

10% of the analyzed samples correspond to control samples (fine blanks, coarse blanks, high, medium and low grade standards). In addition, 10% of pulps are reanalyzed at a second independent certified laboratory (AGQ Lab Sevilla). When the analysis is completed, the certificates are received from the laboratory and the QA/QC protocol identifies any deviation or anomaly in the results and the entire batch is re-assayed in such case. Once the data is approved by the QA/QC protocol assays are entered digitally directly into the database.

 

Qualified Person

 

The scientific and technical information in this news release has been reviewed and approved by Mr. Joaquin Merino, P.Geo, President of the Company and a Qualified Person as defined by NI 43-101 of the Canadian Securities Administrators.

 

About Emerita Resources Corp.

 

Emerita is a natural resource company engaged in the acquisition, exploration and development of mineral properties in Europe, with a primary focus on exploring in Spain. The Company’s corporate office and technical team are based in Sevilla, Spain with an administrative office in Toronto, Canada.

Posted December 20, 2022

Share this news article

MORE or "UNCATEGORIZED"


Red Pine Discovers Significant Gold Mineralization in Faulted Extension of the Jubilee Shear on the Wawa Gold Project

Red Pine Exploration Inc. (TSX-V: RPX) (OTCQB: RDEXF) is pleased ... READ MORE

October 31, 2024

F3 Announces Closing of Private Placement for Aggregate Gross Proceeds of C$8 Million

F3 Uranium Corp. (TSX-V: FUU) (OTC Pink: FUUFF) is pleased to ann... READ MORE

October 31, 2024

Collective Mining Announces Closing of Concurrent Financings for Gross Proceeds of C$46.35 Million

Collective Mining Ltd. (NYSE: CNL) (TSX: CNL) is pleased to ann... READ MORE

October 31, 2024

ARIS MINING ANNOUNCES CLOSING OF US$450 MILLION SENIOR NOTES OFFERING TO FUND REDEMPTION OF OUTSTANDING 6.875% SENIOR NOTES

Aris Mining Corporation  (TSX: ARIS) (NYSE-A: ARMN) announces t... READ MORE

October 31, 2024

Rare Element Resources Receives Final Approval Required to Commence Operations of Rare Earth Demonstration Plant in Wyoming

Staffing in place and operations shakedown underway Rare E... READ MORE

October 31, 2024

Copyright 2024 The Prospector News