Uncategorized
Dynasty Gold Extends High-Grade Gold Mineralization in Hole DP22-03 By 22.5 m to 73.5 m at 8.42 g/t Gold
Dynasty Gold Corp. (TSX-V: DYG) (FSE: D5G1) (OTC Pink: DGDCF) is pleased to report assay results received from new sampling of previously unsampled sections of core from holes DP22-02 and DP22-03 from the last drill program. Mineralization in DP22-03 has been extended from 51 meters to 73.5 meters at an average grade of 8.42 g/t gold, which includes 6.5 meters of 72.23 g/t gold. Additionally, the recalculated assays in DP22-02 have improved the average grade from 189 meters to 223.5 meters to 5.98 g/t gold (See Table 1 below).
“We are pleased to receive these new assays from unsampled sections of the previously reported holes which significantly increase the grade and length of intersected mineralization. The Property has the geological characteristics consistent with an orogenic gold system. Historical drilling was primarily focused on near surface mineralization. Our last drilling program was designed to start testing the depth potential with our deepest holes drilled to date. We are excited to start our next drill program. This will give us a chance to expand on the known high-grade gold zones and test further at depth,” states Ivy Chong, Chief Executive Officer.
Drill holes DP22-02 and DP22-03 were drilled in open areas down-dip from drill hole TC07-02 that was drilled by Teck Resources Limited and returned 1.5 meters of 16 g/t gold. Mineralization generally correlates with magnetic “highs” as identified in the drone magnetic survey conducted in 2022. The 2022 drill holes demonstrate potential continuation of the high-grade gold mineralization in quartz-veined mafic metavolcanic rocks. For further details, please refer to the Company press release of January 10, 2023.
Table 1. Assay Results:
| Hole # | New Assay and Revised Assay Results | Previously Reported (January 10, 2023) | ||||
| From – To (m) | Interval (m) | Au (g/t) | From – To (m) | Interval (m) | Au (g/t) | |
| DP 22-02 | 189.0 – 223.5 | 34.5 | 5.98 | 189 – 214.5 | 25.5 | 5.37 |
| DP 22-03
Including: |
88.5 – 162.0 118.5 – 125.0 |
73.5 6.5 |
8.42 72.23 |
88.5 – 139.5 – |
51.0 – |
7.35 – |
Table 2. Drill Collar and Hole Information
| NAD83 | Zone 15 | |||||
| Hole ID | Easting | Northing | Elevation (m) | Azimuth | Dip | Depth (m) |
| DP22-02 | 534263 | 5471425 | 448 | 180 | -60 | 300 |
| DP22-03 | 534264 | 5471423 | 448 | 160 | -60 | 201 |
The true widths of drill intercepts are not known.
The 2023 drill program will be focused on testing for lateral and vertical extensions of the higher-grade gold mineralization as well as extending the Pelham zone to both the east and west.
Quality Assurance & Quality Control
The core was logged geologically and sample intervals selected in Dynasty’s core shack in Dinorwic, Ontario. They were securely transported and diamond sawed in the presence of the Company’s consulting geologist, and personally delivered to the ALS Global Geochemistry Laboratory in Winnipeg, Manitoba. Dynasty used ALS Global for Au-AA23 gold fire assays and the ME-ICP61 33 multi-elements packages for the minor element analyses. Oreas standards, blanks and duplicates were inserted into the sample stream to check on the comparative accuracy of the gold assays received. Gold fire assays and 4-acid-dissolution geochem analyses were conducted on the samples at the ALS Global Geochemistry Laboratory in Vancouver, B.C, and all gold values higher than 10 g/t were re-assayed by using Au-GRA21 gravimetric fire assays.
The technical information in this release has been reviewed by Peter Holbek, P.Geo, M.Sc., an independent consultant and a Qualified Person as defined by NI 43-101.
About Dynasty Gold Corp.
Dynasty Gold Corp. is a Canadian exploration company currently focused on gold exploration in North America with projects located in the Manitou-Stormy Lake greenstone belt in Ontario and in the Midas gold camp in Nevada. The Company is currently advancing its Thundercloud gold resource in northwest Ontario. A NI 43-101 Independent Technical Report, September 27, 2021 can also be found on the Company and SEDAR websites. The 100% owned Golden Repeat gold project in the Midas gold camp in Elko County, Nevada, is surrounded by a number of large-scale operating mines.
Posted June 21, 2023
MORE or "UNCATEGORIZED"
Millennial Announces Closing Private Placement for Total Proceeds of $9,188,880
Millennial Potash Corp. (TSX-V: MLP) (OTCQB: MLPNF) (FSE: X0D) is... READ MORE
July 31, 2025
Laramide Resources Announces Closing of Upsized $12,000,000 Private Placement
Laramide Resources Ltd. (TSX: LAM) (ASX: LAM) (OTCQX: LMRXF) a ... READ MORE
July 31, 2025
SPC Nickel Closes $3.5 Million Rights Offering Backstopped by Dundee Corporation
SPC Nickel Corp. (TSX-V: SPC) and Dundee Corporation (TSX: DC.A) are pl... READ MORE
July 31, 2025
St. Augustine Announces Positive Results of the Kingking Copper-Gold Project Updated Preliminary Feasibility Study
NPV7% of $4.18 Billion After-tax IRR of 34.2% at $4.30/lb Copper ... READ MORE
July 31, 2025
Independence Gold Intersects 52.46 Metres Grading 2.51 g/t Gold and 19.73 g/t Silver in the Johnny Vein at the 3Ts Project, BC Independence Gold Corp. (TSX-V: IGO) is pleased to report assay results from three additional diamond drill holes completed at the Johnny Vein System at the 3Ts Project located in central British Columbia. These results further confirm the continuity and high-grade nature of the Johnny Vein System and expands the known footprint of mineralization. Located approximately 185 kilometres southwest of Prince George, British Columbia, the 3Ts Project comprises thirty-one mineral claims covering approximately 35,486 hectares in the Nechako Plateau region. The project lies 16 km southwest of Artemis Gold Inc.'s Blackwater Mine and hosts a low-sulphidation epithermal quartz-carbonate vein district within which at least nineteen known mineralized veins, ranging from 50 to over 1,100 metres in strike length and true widths of up to 32 m have been identified. Highlights from diamond drilling include: • Hole 3TS-25-31 intersected a broad zone of mineralization grading 2.51 g/t gold and 19.73 g/t silver over 52.46 metres (true width approximately 32m), including: o 2.32m grading 9.83 g/t gold and 28.02 g/t silver o 2.90m grading 7.16 g/t gold and 63.10 g/t silver o 1.14m grading 18.46 g/t gold and 33.33 g/t silver • Hole 3TS-25-29 returned 7.94 metres grading 2.65 g/t gold and 10.71 g/t silver (true width approximately 7.46m), including 1.94 metres of 7.53 g/t gold and 32.47 g/t silver. • Hole 3TS-25-30 returned 5.90 metres of 1.86 g/t gold and 17.29 g/t silver (true width approximately 5.54m), including 0.72 metres of 4.00 g/t gold and 26.39 g/t silver. "These results further validate the Johnny Vein System as a high-grade, laterally extensive target with strong potential for resource expansion," stated Randy Turner, President & CEO of Independence Gold. "We are particularly excited by the width and grade intersected in hole 3TS-25-31, which demonstrates consistent mineralization over more than 30 metres of true width and includes multiple zones of exceptional gold and silver values." The Johnny Vein System is one of several epithermal quartz-carbonate veins being explored at the 3Ts Project and appears to be comprised of several intertwining veins with mineralized breccias that produce wide zones of mineralization. The primary vein set is interpreted to have a true thickness of approximately 32 metres; however, including adjacent mineralized breccias and minor veins, the total mineralized width may extend up to 47.5 metres true width. The Johnny Vein indicates similarities in grade and continuity to the established Ted-Mint and Tommy Vein Systems, which form the foundation of the current 3Ts resource model (please see news release dated August 18th, 2022 for further details; "Technical Report on the Mineral Resource Estimate Update for the 3Ts Gold Project, Omineca Mining Division, British Columbia, Canada", authored by Armitage and Miller). The combined in-pit and underground components of Tommy and Ted-Mint vein systems contain a total inferred resource estimate of 4,469,297 tonnes grading 3.64 grams per tonne gold and 96.26 g/t silver, at a cut off grade of 0.4 g/t gold equivalent ("AuEq") in-pit and 2.0 g/t AuEq underground, containing 522,330 ounces of gold and 13,831,415 ounces of silver, totaling 678,156 AuEq ounces. Drill results from the Johnny Vein System will be incorporated in the updated NI 43-101 mineral resource anticipated to be completed in the third quarter of 2025. Drill Hole From (m) To (m) Interval (m) Gold (g/t) Silver (g/t) 3TS-25-29 4.00 6.00 2.00 1.15 9.50 and 10.00 11.80 1.80 0.61 3.89 and 20.92 21.66 0.74 2.85 9.46 and 25.66 27.53 1.87 4.09 20.32 and 33.00 38.00 5.00 1.22 2.40 and 44.06 52.00 7.94 2.65 10.71 including 44.06 46.00 1.94 7.53 32.47 3TS-25-29 63.17 63.68 0.51 1.10 13.73 and 66.00 66.70 0.70 1.71 28.57 and 71.00 74.00 3.00 0.75 15.33 and 80.68 86.58 5.90 1.86 17.29 and 88.00 91.00 3.00 0.80 2.00 and 102.70 104.88 2.18 2.03 4.13 3TS-25-31 65.05 66.50 1.45 4.68 5.52 and 67.69 68.10 0.41 6.24 4.88 and 73.54 126.00 52.46 2.51 19.73 including 79.18 81.50 2.32 9.83 28.02 and including 87.10 90.00 2.90 7.16 63.10 and including 109.36 110.50 1.14 18.46 33.33 and 155.00 156.54 1.54 1.82 5.84 Table 1: Significant Intercepts from the Johnny Vein *The true widths of the veins are average 80-95% of the reported interval width QA/QC Protocols Samples consist of saw-cut (NQ) drill core with one-half retained for reference and one-half submitted for analysis. Samples were submitted in sealed plastic bags delivered to Bandstra Transportation for shipping to SGS Natural Resources Canada (SGS) labs in Burnaby, British Columbia, for sample preparation and analysis. Robotic sample preparation is used to ensure reproducibility and samples are pulverized to greater than 85% passing 75 microns. All samples are submitted for four acid digest with an ICP finish. Gold grades are obtained by fire assay with AAS finish. Samples which return greater than 10 parts per million gold and 100 parts per million silver are resubmitted for fire assay with a gravimetric finish. Sample batches consist of core samples, control standards, blanks and duplicates. Blanks and control standards (QAQC) are inserted into each batch of samples, with one QAQC per 20 samples. QAQC samples that return values 10% outside of the expected range require samples from that internal batch to be rerun by the lab. SGS laboratories operate under a Quality Management System that complies with ISO/IEC 17025. SGS's minerals laboratory in Burnaby is accredited by the Standards Council of Canada (SCC) for specific mineral tests listed on the scope of accreditation to the ISO/IEC 17025 standard. Please see SGS Analytical Methods for further details regarding analytical procedures. About Independence Independence Gold Corp. is a well-financed mineral exploration company with holdings ranging from early-stage grassroots exploration to advanced-stage resource expansion in British Columbia and Yukon. The Company is positioned to add shareholder value through systematic project advancement, while management continues to evaluate additional gold and silver projects for possible acquisition. For additional information, visit the Company's website www.ingold.ca. Andy Randell, P.Geo., the Company's Qualified Person as defined by National Instrument 43-101 and who is an independent consultant for the Company, has reviewed the technical information in this news release. Drill Hole Information from this release Drill Hole Easting Northing Elevation Azimuth* Dip Total Meterage 3TS-25-29 363045 5876905 1218 170 70 144 3TS-25-30 363067 5876940 1216 270 70 106 3TS-25-31 363067 5876940 1216 220 65 158 * All drill hole locations are in NAD83, Zone 10 Datum **Based on true north. For magnetic declination add 17.5 degrees
Independence Gold Corp. (TSX-V: IGO) is pleased to report assay r... READ MORE
July 31, 2025
