Dolly Varden Silver Corporation (TSX-V: DV) (OTCQX: DOLLF) (FSE: DVQ1) is pleased to announce results from the Wolf Vein high-grade silver plunge expansion directional drilling. Drill hole DV24-416, averaged 654 g/t Ag, 0.47% Pb and 0.57% Zn over 21.48 meters and drill hole DV24-408, averaged 513g/t Ag, 2.95% Pb and 1.82% Zn over 27.19 meters. Both holes are located on the same vertical section and are separated by 44m vertically. The intersections demonstrate consistent thicknesses and indicate an increased vertical extent to the mineralized zone as it plunges to the southwest. The 2024 exploration drill program on the Kitsault Valley Project has been expanded to 32,000 m from the initial planned 25,000 m based on the successful drilling and supported by the recently completed financing. Currently, 3 drills continue expansion drilling at the Homestake Silver Deposit.

Wolf Vein Extension Drilling

Highlights include:

• DV24-416: 654g/t Ag, 0.47% Pb and 0.57% Zn over 21.48 meters, including 1,000 g/t Ag, 0.11 g/t Au, 0.62% Pb and 0.64% Zn over 7.70 meters.

• DV24-408: 513 g/t Ag, 2.95% Pb and 1.82% Zn over 27.19 meters, including 2,520 g/t Ag, 0.34 g/t Au, 0.18% Pb and 0.88% Zn over 2.80 meters.

* intervals shown are core length. Estimated true widths vary depending on intersection angles and range from 55% to 70% of core lengths, further modelling of the new intersections is needed before true widths can be estimated.

“The Wolf Vein continues to deliver exceptional silver grades, often with significant base metal values and strong native silver mineralization over potentially bulk-mineable widths. The extended drill program will prioritize lateral and vertical step-outs from these new Wolf results and follow up at other exploration targets including the silver zone at Moose. Resource expansion and exploration drilling efforts at the Homestake Silver Deposit continues within the projection of wider higher-grade gold and silver plunge zone defined in 2023,” said Shawn Khunkhun, CEO of Dolly Varden Silver.

This release includes results for three directional drill holes drilled from the same pad and intersecting the Wolf Vein on the same section, approximately 80 meters to the northeast of previously released (August 18, 2024) that documents step-out holes DV24-404, 409, 412 and 414. Directional drilling technology from this second drill pad was used to precisely target areas for vertical extension. Drill holes DV24-416 and DV24-408 intersected wide and high-grade silver mineralization in Wolf Vein breccias and coliform grey silica and carbonate approximately 14 meters above and 30 meters below, respectively from previously reported (September 11, 2023) drill hole DV23-368 that graded 381 g/t Ag, 0.46% Pb and 0.39% Zn over 29.34 meters including 583 g/t Ag, 0.13 g/t Au, 0.66% Pb and 0.45%Pb over 16.97 meter with 1,898 g/t Ag over 1.00 meter (Figure 1).

Figure 1. Section of Wolf Vein showing extended vertical expression of the Wolf vein silver mineralization and consistent wide zones of silica and carbonate vein and vein breccia with native silver, and silver sulphonate mineralization.

Drill hole DV24-416 confirms that high grade silver mineralization extends further up dip than expected, increasing the potential for a broader mineralized zone. There is also an increase in gold associated with higher grade silver as seen in a 0.60 meter interval from 676.04 to 676.64 meters grading 4,350 g/t Ag and 0.47 g/t Au. The mineralized vein remains open towards the sediment cap above it (Figure 3). Step out drilling along the upper portion of the plunge has been prioritized for late season.

Drill hole DV24-408 intersected the wider central portion of the higher-grade silver plunge and shows that in the southwestern drilling on the Wolf Vein, as the exploration approaches the projection of the intersection of the mid-valley north-northwest structures there is an increase in gold values associated with the higher grades of silver and the vein and vein breccias occur within a wide consistent structure.

Figure 2. Plan of Wolf Vein mineralized zone (in red) with all drilling to date. Lithology shown on drill trace- grey: sedimentary rock, green: volcanic rock, pink/red: mineralization. DV24-408, 410 and 416 are drilled from a collar location 80 meters northeast of the previously released step out holes.

Drill hole DV24-410 intersected the lower projection of the high-grade plunge, approximately 43 meters vertically below DV24-408. The vertical expression of the Wolf vein shows increased base metals at depth and on section, increased silver values into the high-grade plunge. This hole intersected 20.22 meters length of vein breccias that had a mix of low grade and high-grade silver, lead and zinc mineralization averaging 198 g/t Ag, 1.68% Pb and 3.42% Zn overall, with a higher-grade interval attributed to more sulphide-rich breccias, grading 823g/t Ag, 6.64% Pb and 1.55% Zn over 2.80 meters (table 1).

Figure 3. Longitudinal Section of Wolf Vein with mineralization envelope in red. Plunge of high-grade silver mineralization expanded vertically over 100m height. Drill traces in this release with bold font.

Wolf Vein

The Wolf Vein is hosted in Jurassic-age Hazelton Formation volcanic rocks and is interpreted as a structurally controlled, multi phased, epithermal vein and vein breccias that occur along a southwest plunging zone of wider, higher grade silver mineralization. Native silver, pyargerite, argentite and argentiferous galena are hosted in multiple phases of silica and iron carbonate veins and breccias. The extention of the mineralization discovered underneath the sedimentary rock cap and the outcropping Wolf deposit has a plunge extent of over 950 meters at -45 to the southwest.

Figure 4. Whole core of Wolf Vein and Vein Breccia in DV24-416 showing interval 674.30m to 682.00m (7.70 meters) with grades highlighted within broader vein intersect.

Figure 5. Cut core sample face of Wolf Vein silver mineralization in DV24-408 @ 698.10m consisting of coarse native silver in epithermal grey silica vein breccia fragments, local coliform texture open space fill. From an individual sample length of 0.78 meters grading 3,760 g/t Ag, 0.18 g/t Au, 10.60% Pb, 4.72%Zn. Field of view is 5cm across.

Table 1: Completed Drill Hole Assays from Wolf Vein (hole order in vertical sequence from top)

*All intervals shown are core length. Estimated true widths vary depending on intersection angles and range from 55% to 70% of core lengths, further modelling of the new interpretation is needed before true widths can be calculated.
 

Table 2: Drill hole data for Wolf Vein holes reported in this release

*Directional drilling mother hole orientation; daughter holes directed at variable orientations downhole to reach target locations
 

Quality Assurance and Quality Control

The Company adheres to CIM Best Practices Guidelines for exploration related activities conducted on its property. Quality Assurance and Quality Control (QA/QC) procedures are overseen by the Qualified Person.

Dolly Varden QA/QC protocols are maintained through the insertion of certified reference material (standards), blanks and field duplicates within the sample stream. Drill core is cut in-half with a diamond saw, with one-half placed in sealed bags and shipped to the laboratory and the other half retained on site. Third party laboratory checks on 5% of the samples are carried out as well. Chain of custody is maintained from the drill to the submittal into the laboratory preparation facility.

Analytical testing was performed by ALS Canada Ltd. in North Vancouver, British Columbia. The entire sample is crushed to 70% minus 2mm (10 mesh), of which a 500 gram split is pulverized to minus 200 mesh. Multi-element analyses were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for 48 elements following a 4-acid digestion process. High grade silver testing was determined by Fire Assay with either an atomic absorption, or a gravimetric finish, depending on grade range. Au is also determined by fire assay on a 30g split with either atomic absorption, or gravimetric finish, depending on grade range. Metallic screen on a 1.0kg sample may be completed on high-grade gold samples.

Qualified Person

Rob van Egmond, P.Geo., Vice-President Exploration for Dolly Varden Silver, the “Qualified Person” as defined by NI43-101 has reviewed, validated and approved the scientific and technical information contained in this news release and supervises the ongoing exploration program at the Dolly Varden Project.

About Dolly Varden Silver Corporation

Dolly Varden Silver Corporation is a mineral exploration company focused on advancing its 100% held Kitsault Valley Project (which combines the Dolly Varden Project and the Homestake Ridge Project) located in the Golden Triangle of British Columbia, Canada, 25kms by road to tide water. The 163 sq. km. project hosts the high-grade silver and gold resources of Dolly Varden and Homestake Ridge along with the past producing Dolly Varden and Torbrit silver mines. It is considered to be prospective for hosting further precious metal deposits, being on the same structural and stratigraphic belts that host numerous other, on-trend, high-grade deposits, such as Eskay Creek and Brucejack. Five kilometers to the East of the Kitsault Valley Project is the Big Bulk property which is prospective for porphyry and skarn style copper and gold mineralization, similar to other such deposits in the region (Red Mountain, KSM, Red Chris).