Copper Road Resources Inc. (TSX-V: CRD) is pleased to announce results of the spring/summer diamond drilling campaign at the Tribag Mine Zone located on its 21,000-hectare Copper Road Project, approximately 80 km. north-west of Sault Ste. Marie, Ontario, Canada.

The company completed 3,000 metres of diamond drilling at the Breton and East breccias located within the Tribag Mine Zone (See Figure 1)

Highlights:

All 8 holes drilled at the Breton and East breccias intersected significant intervals of near-surface mineralization that proved continuity, depth and additional mineralization outside of historical assay models.

Notable intersections include:

Breton Breccia:

East Breccia:

Figure 1: Tribag Mine Zone is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/0e8bf002-27dd-4be1-a804-1225ab24733b

Figure 2: Tribag Mine Zone Drilling: Plan View is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/d4363a32-2c7e-4c50-99b2-70a959d80b7e

John Timmons, President/CEO and Director, comments, “Our goal with this drill program was to deliver near-surface copper mineralization only 20 kilometres off the Trans-Canada highway. We believe our first drill program into our flagship property is just the start of reviving this historical mining district and clearly demonstrates that there is more copper to be mined. We believe that with systematic exploration across our 21,000-hectare project, the Copper Road project will continue to prove itself as a future source of domestic copper to contribute to the clean energy transition.”

Breton Breccia Drilling Results

¹ Assumptions used in USD for the copper equivalent calculation are metal prices of $3.45/lb Copper, $20.54/oz Silver and recovery is assumed to be 100% as no metallurgical test data is available. The following equation was used to calculate copper equivalence: CuEq = Copper (%) + (Silver (g/t) x 0.0087)

Figure 3: Breton Breccia Assay model is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/66b50521-61e1-4c21-9fe3-d4d17d9c9337

Breton Breccia mineralization established from this drill program is hosted in an intensely altered polymictic breccia. The dominant alteration assemblage related to mineralization is sericite-chlorite and carbonate. Chalcopyrite and pyrite content appears to increase with increasing alteration intensity.

These drilling results have demonstrated the presence of broad zones of near surface copper mineralization at the Breton Breccia. The program also confirmed the lateral continuity of copper zones outside of the historical assay models.

Drillhole TR22-001 was drilled to test the northern extension of the Breton Breccia. The hole intersected a short interval of 8.54 meters at 0.26 % Cu and 1.07 g/t Ag from 215 m to 223.54 m.

Drillhole TR22-002 tested the southwestern area of the mineralized breccia. It intersected 52 meters at 0.26 % Cu and 3.51 g/t Ag from 21 m to 73 m, including 14 meters at 0.42 % Cu and 4.49 g/t Ag.

Drillhole TR22-003 was drilled towards the northwestern fringe of the mineralized breccia. It returned grades of 0.29 % Cu and 3.19 g/t Ag over 60 meters from 16 m to 76 m, including an interval of 17 meters at 0.41 % Cu and 6.15 g/t Ag.

Drillhole TR22-004 tested the southeastern edge of the Breton Breccia mineralization. It intersected several zones of copper mineralization at depth with best results of 0.26 % Cu and 1.17 g/t Ag over 24 meters from 166 m to 190 m, including a 1-meter interval containing 2.40 % Cu and 10.40 g/t Ag.

Drillhole TR22-005 tested the southwestern part of the mineralization and was intended to drill into the heart of the breccia. This drill encountered historical underground workings and was aborted at approximately 200 meters in depth. This hole was not sampled.

Drillhole TR22-006 is a re-drill of hole TR22-005. This hole’s location was offset 12 meters to the southwest. This hole intersected a shallow and very wide mineralized zone containing 0.32 % Cu and 2.99 g/t Ag over 100.39 meters from 18 m to 118.39 m, including higher grade intervals of 0.58 % Cu and 4.39 g/t Ag over 30 meters and 1.02 % Cu and 8.39 g/t Ag over 7 meters. This drillhole encountered an obstruction at 205 meters and the hole, which bottomed in mineralization, was terminated. The Company plans to investigate alternative drilling options to optimize drill hole locations at the Breton Breccia to avoid future drill bit obstructions.

Figure 4: TR22-006 Cross Section is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/5fb44c13-919d-4ad7-b716-21869f836df9

East Breccia Drilling Results

¹ Assumptions used in USD for the copper equivalent calculation are metal prices of $3.45/lb Copper, $20.54/oz Silver, $40.50/kg Molybdenum, $1531/kg Rhenium and recovery is assumed to be 100% as no metallurgical test data is available. The following equation was used to calculate copper equivalence: CuEq = Copper (%) + (Silver (g/t) x 0.0087) + (Molybdenum (%) x 5.32) + (Rhenium (g/t) x 0.02)

East Breccia mineralization is characterized by a chlorite-epidote±sericite-carbonate altered polymictic breccia containing pyrite-pyrrhotite-chalcopyrite mineralization. Mineralization extends to metavolcanic and felsic rocks. High copper mineralization appears to be associated with increasing silver, molybdenum, and rhenium content. At depth, in a metavolcanic host, there is evidence of a structurally controlled higher-grade copper-silver-molybdenum-rhenium zone.

Drilling results have established the presence of near surface copper mineralization with accompanying anomalous silver, molybdenum and rhenium content. It also indicates the potential for higher-grade mineralization related to a feeder structure at depth.

Drillhole TR22-007 tested the northwest extension of the East Breccia mineralization. It intersected a broad zone of copper mineralization at 0.22 % Cu and 2.94 g/t Ag over 66 meters from 69 m to 135 m, including a 13-meter interval containing 0.30 % Cu and 4.07 g/t Ag from 83 m to 96 m.

Drillhole TR22-008 was also drilled to test northwest extension of the East Breccia mineralization. It intersected near surface copper mineralization with best results of 0.27 % Cu and 4.84 g/t Ag over 48.6 meters from 34 m to 82.6 m, including higher grade intervals of 0.46% Cu and 9.97 g/t Ag over 14.80 m from 45 m to 59.80 m and 0.93 % Cu and 13.75 g/t Ag over 3 m from 47 m to 50 m. At depth, the hole also intersected, better grade copper mineralization of 0.60 % Cu and 6.83 g/t Ag with significant amounts of Molybdenum (Mo) and Rhenium (Re) over 9 m from 330 m to 339 m. This interval includes a higher-grade zone of 1.07 % Cu, 11.30 g/t Ag, 0.57 % Mo, and 2.09 g/t Re over 2.22 m from 333.78 m to 336 m.

Current and Future Work Plans

The company is continuing its exploration program to search for the potential intrusive source or sources of the extensive copper mineralization covering the property. Target validation is being conducted by extensive lake and surface geochemical surveys in conjunction with geological mapping, review/modelling of historical diamond drilling data and ground truthing of historical geophysical targets. In the upcoming weeks, the company will announce future exploration/drilling plans for the Fall/Winter program.

Figure 5: Copper Road Project is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/e85a0b27-75f3-4ded-ab9f-45dcf1fdde86

Qualified Person

Mr. Augusto Flores IV, P.Geo., a qualified person for the purposes of National Instrument 43-101, has reviewed and approved the technical disclosure contained in this news release.

Quality Assurance and Quality Control

The Company contracted Ronacher MacKenzie Geoscience Inc. of Sudbury Ontario to establish QA/QC procedures in the handling and assaying of drill core.

QA/QC include the systematic insertion of duplicates, blanks and certified reference materials (CRM), with blanks and CRM making up 10% of the sample stream. Drill core samples are logged, and samples were split into half using a diamond core saw. The other half of the drill cores are stored on site in a safe and secure facility. Half-core samples are labelled, placed in sealed bags and shipped directly to AGAT Laboratories in Timmins, ON, an accredited mineral analysis laboratory. The Company plans to check assay several high-grade sections to verify grade.

Copper Road Resources Inc. is a Canadian based explorer engaged in the acquisition, exploration and evaluation of properties for the mining of precious and base metals. The Company is exploring for large copper/gold deposits on the 21,000-hectare Batchewana Bay Project 80 km. north of Sault St. Marie, Ontario, Canada.