The Prospector News

Chibougamau Independent Mines Drilling at Berrigan Intersects Wide Mineralized Zones

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Chibougamau Independent Mines Drilling at Berrigan Intersects Wide Mineralized Zones

 

 

 

 

 

Chibougamau Independent Mines Inc. (TSX-V:CBG)  (FRA:CLL1) (OTC: CMAUF) is pleased to report the results from drilling in the area of Chibougamau Independent’s 100% owned Berrigan property in McKenzie township, (NTS 32G16) northwest of the town of Chibougamau, Quebec.

 

Two drill holes were completed: BT-22-14 for a total of 571.7 m and BT-22-15 for a total of 369 m.

 

Hole BT-22-15 intersected two zones of highly anomalous zinc, gold, and silver mineralization within a core length of 73.2 m (239.5. ft). A first zone between 135.7 m to 154.3 m, returned 2.32 % Zn, 1.15 g/t Au and 7.92 g/t Ag over 15.9 m (52.17ft) and a second zone between 180.6 m to 203.5 m, returned 2.19 % Zn, 2.02g/t Au and 22.46 g/t Ag over 22.9 m (75.13 ft). Higher grade intersections are as follows:

 

Length (m) From (m) To (m) Au (g/t) Ag (ppm) Zn (%)
2.1m 135.7 137.8 1.98 14.57 5.24
Including 1.0m 135.7 136.7 1.71 14.10 6.71
1.1m 136.7 137.8 2.23 15.00 3.90
0.6m 141.3 141.9 9.94 16.80 9.34
0.4m 148.9 149.3 10.80 91.80 29.60
2.5m 180.6 183.1 0.37 8.05 2.49
Including 0.9m 180.6 181.5 0.37 7.45 3.74
1.1m 181.5 182.6 0.03 6.10 1.21
0.5m 182.6 183.1 1.13 13.40 3.08

 

 

 

Length (m) From (m) To (m) Au (g/t) Ag (ppm) Zn (%)
3.2m 186.9 190.1 0.42 26.61 3.80
Including 1.0m 186.9 187.9 0.06 19.10 4.08
0.6m 187.9 188.5 0.04 20.20 3.45
1.0m 188.5 189.5 0.58 29.80 4.03
0.6m 189.5 190.1 1.13 40.20 3.32
1.8m 194.8 196.6 1.98 15.57 5.10
Including 1.0m 194.8 195.8 1.15 12.43 4.95
0.8m 195.8 196.6 3.02 19.50 5.29
3.9m 199.6 203.5 0.98 24.22 5.38
Including 1.5m 199.6 201.1 1.54 48.00 8.62
1.4m 201.1 202.5 0.28 8.10 1.86
1.0m 202.5 203.5 1.13 11.10 5.45

 

Hole BT-22-15 intersected the mineralization 75m below previous hole BT-13-03 which assayed 1.28 % Zn, 1.87 g/t Au, 9.05 g/t Ag over 10.1 m and 1.14 % Zn, 1.51 g/t Au, 28.06 g/t Ag over 26.9m and 25m west and 25m below previously drilled hole BT-16-12 which assayed 2.99 % Zn, 6.90 g/t Au, 12.09 g/t Ag over 4.38m and 2.47 % Zn, 0.47 g/t Au, 6.34 g/t Ag over 7.15 m. Previously reported in press releases dated April 17,2013 and February 1, 2017.

 

Hole BT-22-14 collared 78m southwest of BT-22-15 intersected narrower zones of zinc, silver and gold mineralization including:

 

Length (m) From (m) To (m) Au (ppb) Ag (ppm) Zn (%)
1.3m 167 168.3 34 21.6 1.46
1.0m 183 184 192 52.0 6.30
1.0m 273 274 672 41.4 3.23
1.0m 276 277 372 9.8 1.06
1.0m 399 400 692 44.0 2.29

 

This press release was written by Pierre Riopel, P. Geo. and Jack Stoch, P. Geo., President and CEO of Chibougamau Independent Mines Inc. in their capacities as “Qualified Person (Q.P.)” under NI 43-101.

 

Laboratory and Assay Methods

 

Chibougamau Independent Mines’ core sampling including the quality assurance/quality control program is performed internally by Chibougamau Independent Mines personnel under the immediate supervision of Chibougamau Independent Mines project geologist. The samples are prepared in the coreshack, they are tagged and sealed in plastic bags and are delivered directly by Chibougamau Independent Mines personnel to Expert Laboratories Inc, located at 750-A, rue Saguenay, Rouyn-Noranda.  The laboratory conducts all aspects of the sample preparation including drying and crushing to a minus 10 mesh screen size and the processing of a 300-gram sub sample for pulverization to a nominal minus 200 mesh size with the remaining crushed reject material being retained for storage.  For gold assaying, a 29.16-gram sub-sample of the pulp (1 assay-ton) is taken, fused following the standard procedures used in a fire assay method. The gold content of all samples is determined using atomic Absorption Spectroscopy.  Samples containing greater than 1gpt gold are subjected to a re-assay whereby the gold content is determined using a gravimetric fire assay method. For base metal assaying (copper, zinc including silver and cobalt) a 0.5g sample is initially treated by aqua regia digestion with nitric and hydrochloric acid and subsequently analyzed by a spectrometer of atomic absorption finish.

 

Analytical accuracy and precision are monitored by the routine insertion of blanks, duplicates and reference accredited low/high grade standards at 20 sample intervals in Chibougamau Independent Mines’ sample stream. This is in addition to the routine blanks, duplicates (gold, silver, copper, zinc and cobalt) and accredited standards insertion by Expert Laboratories during the course of the assaying process.

 

Posted December 2, 2022

Share this news article

MORE or "UNCATEGORIZED"


GR Silver Mining Extends Silver Mineralization with Step-Out Drilling at San Marcial 11.9 m @ 226 g/t Ag Eq* including 0.9m @ 716 g/t Ag Eq

GR Silver Mining Ltd. (TSX-V: GRSL) (OTCQB: GRSLF) (FRANKFURT: G... READ MORE

July 25, 2025

Big Ridge Gold Corp. Closes Upsized $5.2 Million Private Placement

Big Ridge Gold Corp. (TSX-V: BRAU) (OTCQB: ALVLF) is pleased to a... READ MORE

July 25, 2025

St. Augustine Closes Private Placement

St. Augustine Gold and Copper Limited (TSX: SAU) is pleased to announce ... READ MORE

July 25, 2025

GoldShore Intersects Additional Mineralization Beneath the Conceptual Open Pit at the Southwest Zone with 22m of 1.30 g/t Au

Goldshore Resources Inc. (TSX-V: GSHR) (OTCQB: GSHRF) (FSE: 8X00)... READ MORE

July 25, 2025

Benz Announces Closing Final Tranche of A$13.5M Financing

Benz Mining Corp. (TSX-V: BZ) (ASX: BNZ) is pleased to advise tha... READ MORE

July 25, 2025

Copyright 2025 The Prospector News