Blackrock Silver Corp. (TSX-V: BRC) (OTCQX: BKRRF) (FSE: AHZ0) announces the first tranche of results from its fully-funded Eastern Expansion Program and NW Step Out Program (see February 25, 2026 news release) on its 100% owned Tonopah West project located in Nye and Esmeralda Counties, Nevada, United States.
PROGRAM HIGHLIGHTS:
DRILL HIGHLIGHTS:
Assays for the Company’s north-west step out program at Tonopah West indicate the inner mineralized corridor continues to the northwest with drillholes TXC26-192A, -199, -200 and TXC26-201 confirming mineralization has been extended an additional 600 metres. The Denver vein set is dilating toward an area where an intrusive complex has been identified in drillholes TXC26-190 and TXC22-051.
In TXC22-051, a Cretaceous-age granite (107Ma) was encountered. The USGS completed the age dating. In drillhole TXC26-190, Blackrock encountered a younger mineralized granodiorite which returned elevated gold and silver up to 28 g/t silver and 0.29 g/t gold. The Denver vein system is heading in the direction of the intrusive complex and may hold a clue to the origins of the Tonopah silver and gold source. The Denver vein system is much younger than the granite at 20 Ma. This structural setting may promote a priority exploration target where the dilatant zone around the intrusive that may concentrate silver and gold.
Table 1 summarizes the significant results of the Eastern Expansion Program and NW Step Out Program using a cut-off grade of 100 grams per tonne silver equivalent.
Table 1: Eastern Expansion Program and NW Step Out Program Significant Results Using a 100 g/t AgEq Cut-off Grade
| Drillhole ID | Drill Program | Hole Type | From (m) |
To (m) |
Drill Interval (m) | Ag gram per Tonne |
Au gram per Tonne |
AgEq gram per Tonne |
| TXC26-180 | E Extension | RC/Core | 436.63 | 438.61 | 1.98 | 74.5 | 0.646 | 144.2 |
| TXC26-184 | E Extension | RC/Core | 281.33 | 281.82 | 0.49 | 93.6 | 0.961 | 197.4 |
| TXC26-184 | E Extension | RC/Core | 284.2 | 284.59 | 0.40 | 128 | 1.74 | 315.8 |
| TXC26-184 | E Extension | RC/Core | 296.11 | 296.88 | 0.76 | 431 | 5.61 | 1,036.60 |
| TXC26-184 | E Extension | RC/Core | 305.29 | 305.69 | 0.40 | 387 | 4.54 | 877.1 |
| TXC26-185 | E Extension | RC/Core | 252.22 | 252.59 | 0.37 | 157 | 1.86 | 357.8 |
| TXC26-185 | E Extension | RC/Core | 258.81 | 259.23 | 0.43 | 53 | 0.784 | 137.6 |
| TXC26-186 | E Extension | RC/Core | 478.84 | 479.15 | 0.31 | 75.3 | 0.785 | 160.1 |
| TXC26-186 | E Extension | RC/Core | 491.1 | 491.64 | 0.55 | 126 | 1.28 | 264.2 |
| TXC26-191 | NW Stepout | RC/Core | 648.16 | 648.92 | 0.76 | 71.4 | 0.632 | 139.6 |
| TXC26-192A | NW Stepout | Core | 590.25 | 593.29 | 3.05 | 43.3 | 0.83 | 132.9 |
| TXC26-192A | NW Stepout | Core | 597.29 | 597.71 | 0.43 | 263 | 3.48 | 638.7 |
| TXC26-192A | NW Stepout | Core | 633.83 | 635.81 | 1.98 | 179.5 | 1.514 | 343 |
| TXC26-192A | Including | 635.39 | 635.81 | 0.43 | 553 | 5.2 | 1,114.40 | |
| TXC26-195 | NW Stepout | RC/Core | 259.69 | 260 | 0.31 | 262 | 2.52 | 534.1 |
| TXC26-195 | NW Stepout | RC/Core | 329.19 | 329.79 | 0.61 | 66.7 | 0.689 | 141.1 |
| TXC26-195 | NW Stepout | RC/Core | 332.14 | 332.75 | 0.61 | 58.3 | 0.668 | 130.4 |
| TXC26-195 | NW Stepout | RC/Core | 388.93 | 389.54 | 0.61 | 51.8 | 0.818 | 140.1 |
| TXC26-196 | E Extension | RC/Core | 258.01 | 258.62 | 0.61 | 92.2 | 1.32 | 234.7 |
| TXC26-198 | E Extension | RC/Core | 420.63 | 421.84 | 1.22 | 56.2 | 0.62 | 123.1 |
| TXC26-199 | NW Stepout | RC/Core | 670.74 | 671.93 | 1.19 | 124 | 0.506 | 178.6 |
| TXC26-199 | NW Stepout | RC/Core | 678.61 | 678.91 | 0.31 | 63.8 | 0.773 | 147.3 |
| TXC26-199 | NW Stepout | RC/Core | 686.72 | 687.02 | 0.31 | 66.7 | 0.458 | 116.2 |
| TXC26-199 | NW Stepout | RC/Core | 751.33 | 752.04 | 0.70 | 79.9 | 0.425 | 125.8 |
| TXC26-199 | NW Stepout | RC/Core | 765.96 | 767.18 | 1.22 | 129.3 | 1.53 | 294.5 |
| TXC26-200 | NW Stepout | RC/Core | 673 | 673.49 | 0.49 | 797 | 2.77 | 1,096.00 |
| TXC26-200 | NW Stepout | RC/Core | 707.66 | 708.36 | 0.70 | 250 | 0.867 | 343.6 |
| TXC26-200 | NW Stepout | RC/Core | 716.59 | 717.14 | 0.55 | 56.1 | 0.451 | 104.8 |
| TXC26-200 | NW Stepout | RC/Core | 730.18 | 730.73 | 0.55 | 113 | 0.119 | 125.8 |
| TXC26-200 | NW Stepout | RC/Core | 733.87 | 734.94 | 1.07 | 153 | 0.845 | 244.2 |
| TXC26-200 | NW Stepout | RC/Core | 761.09 | 761.48 | 0.40 | 77.9 | 0.405 | 121.6 |
| TXC26-200 | NW Stepout | RC/Core | 774.16 | 774.71 | 0.55 | 34.6 | 0.719 | 112.2 |
| TXC26-200 | NW Stepout | RC/Core | 835.61 | 836.65 | 1.04 | 43.3 | 1.896 | 248 |
| TXC26-200 | NW Stepout | RC/Core | 840.79 | 841.55 | 0.76 | 265 | 0.496 | 318.5 |
| TXC26-201 | NW Stepout | RC/Core | 599.54 | 600.06 | 0.52 | 3.6 | 3.46 | 377.1 |
| TXC26-201 | NW Stepout | RC/Core | 625.57 | 625.91 | 0.34 | 64 | 0.64 | 133.1 |
| TXC26-201 | NW Stepout | RC/Core | 630.63 | 631.39 | 0.76 | 133 | 0.74 | 212.9 |
| TXC26-201 | NW Stepout | RC/Core | 739.87 | 740.42 | 0.55 | 76.1 | 0.832 | 165.9 |
| AgEq = Ag + Au/(Factor); where Factor = (Ag Price/Au Price)*(Ag Recovery/Au Recovery or Factor=($35/$3,500)*(88%/96%)=0.009263; True thickness is 40 to 65% of interval thickness based on the modelled vein geometries; Cut-off grade is 100 gpt AgEq; RC/Core = RC pre-collar with core tail. | ||||||||
Andrew Pollard, Blackrock’s President and CEO, stated, “Tonopah is one of the great silver districts in American history, with historic production of 174 million ounces of silver and 1.8 million ounces of gold1. While we move forward on the permitting initiatives that will allow us to systematically de-risk and advance the project, we’re drilling to test the full potential and size of the district. These programs are about addition, not subtraction. Each positive intercept expands the mineralized footprint of the deposit and points the Company toward the project’s next phase of growth. We’ve now tracked high-grade mineralization well beyond the existing resource footprint, 600 metres to the northwest along the Denver vein system. The system keeps going and we’re using the high-grade intercepts to home in on priority targets in real time. The veins appear to be heading toward a mineralized intrusive complex that may be leading us toward the heart of the system. With assays for 12 holes pending and the drills still turning, we’re eagerly awaiting results as our real-time targeting helps us vector in on the best parts of the expanded system. Drilling to the northwest shows much more blue sky is achievable where additional drilling is being contemplated.”
TXC26-190 was completed to a depth of 1,383 metres and terminated in carbonaceous limestones of the Ordovician Palmetto Group. The limestones are altered and contain gold, arsenic and antimony in elevated concentrations at the contact with the volcanic package.
The Company’s eastern expansion drill program at Tonopah West has been more challenging with silver and gold bounded between the Pittsburg-Monarch and the McKane fault systems. These northwest oriented faults bound the high-grade mineralization as reported in TXC26-184, but off-setting the mineralization has proved to be difficult. The Company is evaluating the results received to date under the Eastern Expansion Program to establish the trends of high-grade silver and gold within this fault bounded area. The silver and gold resource area, as reported in the Company’s March 2026 mineral resource estimate, has been expanded, but more geologic diligence is required to fully understand the geometry between the Pittsburg-Monarch and McKane fault systems.

Figure 1: Drillhole Location Map
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/676/315607_f0c8c20ee40108a5_001full.jpg
The Reverse Circulation pre-collar drilling started in early March 2026 for the Eastern Expansion Program and the NW Step Out Program. To date, a total of 35 pre-collars totalling 8,074 metres were completed to specifications. One pre-collar hole was deemed unusable and re-drilled. The pre collar program was completed at the end of June 2026.
Core tails were initiated in late March 2026 with one core drill and expanded to two core drills in late April 2026. To date, a total 10,032 metres of core tails have been completed in 31 holes, two holes are in process and two holes are awaiting completion. Three core holes from surface are being contemplated to follow up on the NW Step Out Program results.
Table 2: Drillhole Location Data (NAD1927 UTM, Zone 11 Datum)
| Drillhole ID | Area | Type | UTM_NAD27 E | UTM_NAD27 N | Elevation (m) | Azimuth | Dip | Total Depth (Ft) | Total Depth (m) |
| TXC26-180 | Victor | RC/Core | 478803.50 | 4213793.70 | 1801.81 | 180 | -80 | 1739.0 | 530.0 |
| TXC26-181 | Victor | RC/Core | 478752.97 | 4213854.92 | 1798.58 | 170 | -70 | 1595.0 | 486.2 |
| TXC26-182 | Ohio | RC/Core | 478700.94 | 4213524.18 | 1804.46 | 180 | -80 | 1394.0 | 424.9 |
| TXC26-183 | Ohio | RC/Core | 478701.07 | 4213523.21 | 1804.39 | 180 | -65 | 1393.0 | 424.6 |
| TXC26-184 | DPB South | RC/Core | 478340.51 | 4213735.73 | 1785.77 | 180 | -75 | 1365.0 | 416.1 |
| TXC26-185 | DPB South | RC/Core | 478354.80 | 4213710.00 | 1785.61 | 180 | -65 | 1247.0 | 380.1 |
| TXC26-186 | Victor | RC/Core | 478684.02 | 4213979.78 | 1799.42 | 180 | -85 | 1827.0 | 556.9 |
| TXC26-187 | DPB South | RC/Core | 478401.57 | 4213784.47 | 1785.84 | 180 | -70 | 1213.0 | 369.7 |
| TXC26-188 | Ohio | RC/Core | 478657.47 | 4213622.65 | 1800.60 | 180 | -80 | 1142.0 | 348.1 |
| TXC26-189 | DPB South | RC/Core | 478603.28 | 4213598.06 | 1798.21 | 180 | -80 | 998.0 | 304.2 |
| TXC26-190 | NW Stepout | RC/Core | 476219.70 | 4215281.79 | 1723.75 | 0 | -90 | 4537.0 | 1382.9 |
| TXC26-191 | DPB North | RC/Core | 477781.64 | 4214656.31 | 1770.97 | 168 | -74 | 2372.0 | 723.0 |
| TXC26-192 | NW Stepout | RC/Core | 477582.04 | 4214897.11 | 1769.12 | 87 | -87 | 1861.5 | 567.4 |
| TXC26-192A | NW Stepout | Core | 477582.04 | 4214897.10 | 1769.12 | 87 | -87 | 3083.5 | 939.9 |
| TXC26-193 | NW Stepout | RC/Core | 477024.64 | 4214859.61 | 1751.99 | 0 | -90 | 2894.5 | 882.2 |
| TXC26-194 | NW Stepout | RC/Core | 477526.19 | 4214277.86 | 1758.29 | 299 | -72 | 2544.0 | 775.4 |
| TXC26-195 | DPB South | RC/Core | 478403.17 | 4213387.75 | 1792.78 | 180 | -60 | 1301.0 | 396.5 |
| TXC26-196 | DPB South | RC/Core | 478252.74 | 4213492.34 | 1784.29 | 180 | -75 | 1458.0 | 444.4 |
| TXC26-197 | Victor | RC/Core | 478623.17 | 4213856.03 | 1793.30 | 180 | -70 | 1334.0 | 406.6 |
| TXC26-198 | Victor | RC/Core | 478661.38 | 4213874.17 | 1795.84 | 180 | -80 | 1658.0 | 505.4 |
| TXC26-199 | NW Stepout | RC/Core | 477610.92 | 4214648.21 | 1763.62 | 180 | -80 | 2659.5 | 810.6 |
| TXC26-200 | NW Stepout | RC/Core | 477610.82 | 4214647.37 | 1763.65 | 180 | -72 | 2785.0 | 848.9 |
| TXC26-201 | NW Stepout | RC/Core | 477711.79 | 4214601.41 | 1766.68 | 180 | -80 | 2507.0 | 764.1 |
Quality Assurance/ Quality Control
All sampling is conducted under the supervision of the Company’s project geologists, and a strict chain of custody from the project to the sample preparation facility is implemented and monitored. The RC and core samples are hauled from the project site to a secure and fenced facility in Tonopah, Nevada, where they are loaded on to American Assay Laboratory’s flat-bed truck and delivered to AAL’s facility in Sparks, Nevada. A sample submittal sheet is delivered to AAL personnel who organize and process the sample intervals pursuant to the Company’s instructions.
The RC samples are lined out at the lab and logged in to AAL’s system. The core samples are cut using core saws and personnel at AAL’s facility in Sparks, Nevada according to the Company’s instructions delivered with each core hole.
All samples are dried, crushed to 85% passing 10 mesh (2mm) and a 250-gram sub-sample split is collected and pulverized to 200 mesh (74 micron) in a ring and puck pulverizer. Then the pulverized material is digested and analyzed for gold using fire assay fusion and an Induced Coupled Plasma finish on a 30-gram assay split (FA-PB30-ICP). Silver is determined using five-acid digestion and ICP analysis (ICP-5AM48). Over limits for gold and silver are determined using a gravimetric finish (GRAVAU30 and GRAVAG30). Data verification of the assay and analytical results are completed to ensure accurate and verifiable results. Blackrock personnel insert a blind prep blank, lab blank or a certified reference material approximately every 15th to 20th sample.
Qualified Persons
Blackrock’s exploration activities at Tonopah West are conducted and supervised by Mr. William Howald, Executive Chairman of Blackrock. Mr. William Howald, AIPG Certified Professional Geologist #11041, is a Qualified Person as defined under National Instrument 43-101 – Standards of Disclosure for Mineral Projects. He has reviewed and approved the contents of this news release.
About Blackrock Silver Corp.
Blackrock Silver Corp. (TSX-V: BRC) (OTCQX: BKRRF) (FSE: AHZ0) is an American-focused emerging primary silver developer systematically advancing the high-grade Tonopah West project in west-central Nevada, a jurisdiction consistently ranked among the top mining regions globally. The Company is focused on unlocking the value of one of the highest-grade undeveloped silver projects in the industry and delivering a secure, domestic source of a metal critical to the U.S. energy and defense supply chains.
Additional information on Blackrock Silver Corp. can be found on its website at www.blackrocksilver.com and by reviewing its profile on SEDAR+ at www.sedarplus.ca.
For further information, please contact:
Sean Thompson, Head of Investor Relations
Blackrock Silver Corp.
Phone: 1-800-380-1530
Email: sean@blackrocksilver.com
Andrew Pollard, President and Chief Executive Officer
Blackrock Silver Corp.
Phone: (604) 817-6044
info@blackrocksilver.com
SAGA Metals Corp. (TSX-V: SAGA) (OTCQX: SAGMF) (FSE: 20H), a North American exploration company foc... READ MORE
Fredonia Mining Inc. (TSX-V: FRED) is pleased to announce that it has closed its previously announce... READ MORE
Legacy Gold Mines Ltd. (TSX-V: LEGY) is pleased to report assay results from core holes LG26-017 an... READ MORE
Inventus Mining Corp. (TSX-V: IVS) is pleased to report results from 100 drill holes from its now-... READ MORE
Abcourt Mines Inc. (TSX-V: ABI) (OTCQB: ABMBF) is pleased to present its operational report for the ... READ MORE