The Prospector News

Atico Reports Multiple Higher-Grade Intercepts up to 10.20m of 6.26% Cu, 8.50 g/t Au and 10.0m of 6.77% Cu, 3.39 g/t Au and Continues to Extend the Ore Body at El Roble Mine in Colombia

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Atico Reports Multiple Higher-Grade Intercepts up to 10.20m of 6.26% Cu, 8.50 g/t Au and 10.0m of 6.77% Cu, 3.39 g/t Au and Continues to Extend the Ore Body at El Roble Mine in Colombia

Atico Mining Corporation (TSX-V: ATY) (OTCID: ATCMF) is pleased to announce positive results from 21 drill holes completed in 2025 within an area of historical mining, successfully expanding the tonnage at the El Roble mine. The table below highlights some assay results in bold for drill core holes, which include 10.20m of 6.26% Cu, 8.50 g/t Au and 10.00m of 6.77% Cu, 3.39 g/t Au. Ore grade intercepts are reported over widths of 0.27 to 10.3 meters in areas with limited drilling with results highlighting the possibility of further extending the ore body with additional drill programs.

Holes ATD-0329 through ATD-0348 have discovered important new mineralization which are considerably beyond our expectations for the ¨Cuerpo Principal Inferior¨ CP ore body.

“Our ongoing drilling campaign at El Roble continues to deliver important results, intercepting new mineralization while successfully extending the boundaries of historical massive sulfide zones,” said Fernando E. Ganoza, CEO. “These assay results reinforce our confidence that higher-grade copper and gold mineralization extends beyond the historical footprint. The deposit remains open both at depth and along strike, confirming significant potential within and outside the previously defined mineralized shell. The drill campaign is planned to continue throughout 2026.”

Exploration Drilling Results with a 1% copper cutoff Include:

 

Hole From (m) To (m) Interval (m) Cu % Au g/t
ATD-0329 75.00 82.30 7.30 9.93 2.56
ATD-0329 92.90 94.60 1.70 6.54 1.79
ATD-0329 96.30 99.10 2.80 6.56 1.40
ATD-0329 101.00 102.00 1.00 2.91 4.95
ATD-0329 103.00 113.00 10.00 6.77 3.39
ATD-0329 119.60 121.20 1.60 2.20 2.95
ATD-0331 92.00 94.80 2.80 7.26 6.28
ATD-0331 95.40 99.00 3.60 3.51 24.61
ATD-0331 107.80 109.00 1.20 7.45 7.95
ATD-0331 111.80 113.70 1.90 7.30 4.61
ATD-0333 98.30 99.20 0.90 4.92 7.62
ATD-0333 100.00 101.00 1.00 1.76 4.00
ATD-0333 104.00 109.20 5.20 3.40 3.54
ATD-0333 112.00 116.60 4.60 3.60 5.32
ATD-0333 119.50 123.10 3.60 10.14 9.46
ATD-0333 126.00 127.00 1.00 3.35 1.11
ATD-0334 91.60 95.20 3.60 6.27 4.99
ATD-0334 95.70 98.00 2.30 2.63 3.14
ATD-0334 99.50 101.60 2.10 10.65 2.16
ATD-0334 106.80 108.80 2.00 7.70 1.10
ATD-0336 70.14 70.43 0.29 1.47 1.92
ATD-0336 71.00 71.27 0.27 4.34 21.10
ATD-0336 72.40 76.00 3.60 3.91 3.85
ATD-0338 68.44 76.45 8.01 7.02 2.78
ATD-0338 88.90 93.20 4.30 1.58 .60
ATD-0338 101.10 103.00 1.90 6.36 2.09
ATD-0340 93.70 96.00 2.30 4.21 3.98
ATD-0340 98.40 108.70 10.30 3.33 4.21
ATD-0341 86.40 90.90 4.50 5.57 .83
ATD-0341 92.30 93.40 1.10 2.97 1.04
ATD-0342 88.25 91.60 3.35 4.92 14.23
ATD-0343 82.00 84.50 2.50 1.21 1.22
ATD-0343 85.00 89.00 4.00 3.75 3.72
ATD-0344 105.10 106.80 1.70 2.03 1.84
ATD-0346 112.00 122.20 10.20 6.26 8.50
ATD-0347 113.55 119.20 5.65 5.94 8.72
ATD-0347 121.80 122.80 1.00 1.45 24.60
ATD-0347 123.90 124.60 0.70 1.94 31.70
ATD-0348 81.15 82.60 1.45 1.01 5.00
ATD-0348 84.60 86.35 1.75 3.27 18.40
ATDM-070 43.00 47.60 4.60 5.12 3.12
ATDM-071 35.00 37.00 2.00 3.77 5.12
ATDM-071 39.00 43.00 4.00 4.60 2.30
ATDM-073 37.00 40.00 3.00 7.84 5.39
ATDM-075 37.20 45.50 8.30 4.01 3.77
ATDM-078 43.60 46.30 2.70 2.44 12.67
ATDM-081 32.40 33.50 1.10 4.95 4.90
ATDM-081 51.50 54.40 2.90 1.98 1.15

True widths are dependent on uncertainties in the local strike and dip of the mineralization and are estimated to be between 90% and 95% of the drill intercept.

Image 1: Mineralized shells based on historical massive and new bodies at the El Roble Mine with intercepts from the current drill program

 

Image 2: Detailed view of mineralized shells based on historical massive and new bodies at the El Roble Mine with intercepts from the current drill program

 

Exploration Drilling Program

The goal of the 2025 underground drilling program at the El Roble mine is to define zones of mineralization within the extent of the main historic massive sulphide body that were not exploited by previous operators, to expand the historically identified resource and explore for new massive sulfide bodies. The Company began this drill infill program to test the main mineralized body and the immediately adjacent area during the first quarter of 2023 and has continued the program with over 5,000 meters of drilling during 2025.

All intervals include only assays of greater than 1% Cu and higher-grade intervals within these sections do not occur.

El Roble Mine

The El Roble mine is a higher grade, underground copper and gold mine with nominal processing plant capacity of 1,000 tonnes per day, located in the Department of Choco in Colombia. Its commercial product is a copper-gold concentrate.

Since obtaining control of the mine on November 22, 2013, Atico has upgraded the operation from a historical nominal capacity of 400 tonnes per day.

El Roble’s reserves estimate, with an effective date of March 12, 2024, includes Proven and Probable mineral reserves of 828 thousand tonnes averaging 2.49% Cu, 2.20 g/t Au and a life of mine until Q1-2027. A full NI 43-101 technical report is available on SEDAR+. For more information on the reserves estimate refer to SEDAR+ and on the Company’s website.

Mineralization is open at depth and along strike and the Company plans to further test the limits of the deposit. On the larger land package, the Company has identified a prospective stratigraphic contact between volcanic rocks and black and grey pelagic sediments and cherts that has been traced by Atico geologists for ten kilometers. This contact has been determined to be an important control on VMS mineralization on which Atico has identified numerous target areas prospective for VMS type mineralization occurrence, which is the focus of the current surface drill program at El Roble.

 

About Atico Mining Corporation

Atico is a growth-oriented Company, focused on exploring, developing and mining copper and gold projects in Latin America. The Company generates significant cash flow through the operation of the El Roble mine and is developing its high-grade La Plata VMS project in Ecuador. The Company is also pursuing additional acquisition of advanced stage opportunities. For more information, please visit www.aticomining.com.

ON BEHALF OF THE BOARD

Fernando E. Ganoza
CEO
Atico Mining Corporation

Trading symbols: TSX.V: ATY | OTCID: ATCMF

Investor Relations
Igor Dutina
Tel: +1.604.633.9022

Posted January 28, 2026

Share this news article

MORE or "UNCATEGORIZED"


Skeena Gold & Silver Secures the BC Mines Act Permit Following the Receipt of the Environmental Assessment Certificate for Eskay Creek

Skeena Resources Limited (TSX: SKE) (NYSE: SKE) is pleased to announce the receipt of its British Co... READ MORE

January 28, 2026

Spanish Mountain Gold Drilling Intersects 133.57 Metres Grading 1.35 g/t Gold With a Higher-Grade Subset of 25.47 Metres of 4.28 g/t Gold

Spanish Mountain Gold Ltd. (TSX-V: SPA) (FSE: S3Y) (OTCQB: SPAUF) is pleased to report additi... READ MORE

January 28, 2026

Minera Alamos Announces Secondary Market Purchase of its Shares by Group of Strategic Investors

Minera Alamos Inc. (TSX-V: MAI) (OTCQX: MAIFD) today announces that a subsidiary of Equinox G... READ MORE

January 28, 2026

Altamira Gold Intersects High Grade Gold Mineralization within the Cajueiro Mineral Resource and Commences Drilling at the Untested Mombaque and Guillermo Porphyry Targets, Brazil

Altamira Gold Corp. (TSX-V: ALTA) (FSE: T6UP) (OTCQB: EQTRF), is pleased to report assay res... READ MORE

January 28, 2026

Copyright 2026 The Prospector News