Atico Mining Corporation  (TSX-V: ATY) (OTCQX: ATCMF) is pleased to report on the latest results of its 2021 drilling program at the La Plata high-grade volcanogenic massive sulphide project in Ecuador. These latest results confirm additional new zones outside of the known envelopes, more precisely along strike and between North and South Blocks.

La Plata Drilling Highlights Include:

True widths are dependent on uncertainties in the local strike and dip of the mineralization and are estimated to be between 76% and 83% of the drill intercept.

• Hole CMLP-21-189 was drilled as an in-fill through the South Block and confirmed the surrounding robust grades intercepted by previous drilling of VMS mineralization. Copper and gold grades in the hole remain consistent through 9.8 meters of massive sulphide mineralization.
• In this sequence, drilling targeted new extensions to test for mineralization at depth, extending the VMS footprint deeper below the North Block. Recent results, including CMLP-21-190 and CMLP-21-192 confirm that additional mineralization continues at depth. Hole CMLP-21-190 also reported two robust mineralized intercepts. The first intercept is dominated by sphalerite and the second intercept by chalcopyrite. These results indicate the presence of a parallel VMS structure located several meters east of the initial North Block.
• Hole CMLP-21-192 reported grades of 171 g/t silver and 11.9 % zinc over 6.2 meters in addition to strong copper and gold grades.

Positive drilling results justify additional drilling at La Plata

The 2021 drilling campaign has delivered strong results. Drilling results have extended the footprint of the North and South Blocks beyond the known VMS lenses and confirmed the presence of additional mineralized structures parallel to the initial South and North Blocks.

Following the positive results returned by the first 8,000 meter drill program, the Company will extend its drilling efforts to 12,000 meters of diamond drill on the La Plata project.

2021 Regional exploration and Drilling

Earlier this year, Atico reinitiated regional exploration on La Plata. A part of this year’s exploration plan was to restart the regional program and test several targets identified further to the north along the concession’s copper anomaly trend. Previously, the exploration team sampled bedrock in drainages over half a kilometer north of the Guatuza zone. These samples were analyzed and reported up to 4.5 g/t Au, 51.3 g/t Ag, 16.55% Cu, and 5.83% Zn (refer to Toachi Mining’s news release dated January 16^th, 2019).

In addition, The San Pablo target area, located approximately one kilometer north along the copper trend will also be included in this year’s program and where the regional drilling has already begun. The San Pablo target had been historically drilled during a campaign supervised by Dr. Duncan Derry between 1965 and 1967, with results at the time reporting 22 meters of 1.8% copper.

Figure 1 is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/c325efb9-2621-4cbd-8466-dddf349a632c

Drill Program Assay Results:

True widths are dependent on uncertainties in the local strike and dip of the mineralization and are estimated to be between 76% and 83% of the drill intercept.

La Plata Project

Gold-bearing sulphide mineralization at La Plata occurs as compositional banding composed of chalcopyrite, sphalerite and pyrite laminae with barite occurring as clasts and also as layers. The mineralized lenses have also been dislocated by a few faults and dolerite dikes cutting the body.

The La Plata project is amongst the highest-grade gold-copper VMS deposits in which base and precious metal mineralization is interpreted to have formed as part of multiple volcanic episodes that created a stacked volcanic-exhalite hydrothermal sequence considered favorable for hosting additional VMS lenses. The recent drilling results in the southern portion of the deposit have encountered deeper mineralization, and an extension of mineralization to the north has been discovered by recent trenching results.

The La Plata independent Amended and restated NI 43-101 Preliminary Economic Assessment of the La Mina VMS Project Cotopaxi Province, Ecuador originally dated March 30th, 2019, amended and restated July 17, 2019 was prepared by SGS Canada Inc. Mineral Services, Daniel Leroux, M.Sc., P.Geo. Brian Wolfe. M.Sc., MAIG, David Orava, P.Eng., Simon Meik, FAusIMM (CP), Qinghua (Jason) Jin, P.E and pursuant to National Instrument 43-101 (“NI 43-101”) and reports the La Plata inferred resources at 1.9 million tons at an average grade of 4.1 g/t Au, 49.4 g/t silver, 3.3% Cu, 4.5% Zn, 0.6% Pb as available on SEDAR. Preliminary economic assessments are preliminary in nature, that include inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the preliminary economic assessment will be realized. Such projects have increased uncertainty and risk of failure. Mineral resources that are not mineral reserves do not have demonstrated economic viability.

The La Plata project consists of a concession covering a total area of 2,300 hectares along its 9-kilometer length, which contains known mineralization in two VMS lenses and nine priority exploration targets.

The Company has a binding option agreement with a private Ecuadorean company to earn up to 75% in the La Plata project, of which the first option to acquire the initial 60% ownership has been exercised. Please refer to the Company’s MD&A for the year ended December 31, 2019 for further details.

Quality Assurance & Quality Control

Before sampling, a centerline, representing bottom of hole (or a reference line when this is not known) is marked on the drill core. The core is cut and sampled, always sampling the right-hand side of the drill core. Samples are selected based on logged geological features, such as rock type, mineralization, alteration, veining etc. Sample length does not exceed 2.5 m nor is smaller than 20 cm. A total of 10% of the samples submitted are certified blanks and standards and field duplicates with, as a minimum, one blank submitted at the beginning of each sample batch. Certified standards are submitted at an average of 6% of the samples submitted. Field duplicates are taken at a rate of 1 in 20 of the samples taken. For all drill holes, analysis was completed by ALS Chemex in Lima, Peru with sample preparation completed in Quito. The lab is accredited with International Standards ISO/IEC 17025:2005 and ISO 9001:2015. All major ALS Geochemistry analytical laboratories are accredited to ISO/IEC 17025:2005 for specific analytical procedures.

Qualified Control

Dr. Michael Druecker, CPG, is a qualified person under NI 43-101 standards and independent of the company, is responsible for ensuring that the information contained in this news release is an accurate summary of the original reports and data provided to or developed by Atico Mining Corporation. Dr. Druecker has approved the scientific and technical content of this news release.

About Atico Mining Corporation

Atico is a growth-oriented Company, focused on exploring, developing and mining copper and gold projects in Latin America. The Company generates significant cash flow through the operation of the El Roble mine and is developing its high-grade La Plata VMS project in Ecuador. The Company is also pursuing additional acquisition of advanced stage opportunities.