Ascot Resources Ltd. (TSX: AOT) (OTCQX: AOTVF) is pleased to announce the last remaining assay results from the 2022 exploration drill program at the Company’s Premier Gold Project located on Nisga’a Nation Treaty Lands in the prolific Golden Triangle of northwestern British Columbia. These results are from surface drilling for in-fill and exploration purposes at the Day Zone and the Big Missouri deposit, approximately six kilometres north of the past-producing Premier mill.
Highlights from the drill results include:
Note: True widths are estimated to be between 60% to 80% of reported interval widths.
This release summarizes the fourth and final batch of assay results from 2022 surface drilling at the Big Missouri deposit, as well as all holes drilled at the Day Zone. Twelve holes totaling 1,227 metres were drilled from two pads (BM4/22 and BM5/22) at the Day Zone and four holes totaling 495 metres were drilled from pad BM6/22 at the Big Missouri deposit, just south of the S1 Pit where the underground portal is located. An overview of drill pad and hole locations is shown in Figure 1. Summaries of assay results for the Day Zone and Big Missouri are shown in Tables 1 and 2, respectively.
Derek White, President and CEO of Ascot commented, “Having recently closed our financing for approximately C$200 million to complete construction of the Premier Gold Project, exploration results such as these are much more meaningful as they continue to reveal high gold grades and new zones of mineralization which could be exploited in the early years of the mine life. The headline intercept of 199 grams per tonne is the highest-grade interval Ascot has drilled at the Day Zone since its initial discovery in 2020 and aligned well with the predicted orientation of mineralization. We continue to be impressed with the resource expansion potential and are very excited about the exploration options for 2023 and enhancing the continuity and expansion of resources to the west of Big Missouri.”
Figure 1 – https://www.globenewswire.com/NewsRoom/AttachmentNg/d431de2e-c03b-45a6-87e9-4a4df6f32e75
Day Zone drilling
Figure 2 shows an east-looking 3D cross section of drilling at the Day Zone. Holes drilled from pads BM4/22 and BM5/22 were targeting a 150 metre gap zone between previous drill pads. Drill holes from pad BM5/22 were successful in identifying continuity of mineralized zones from the south, as evidenced by hole P22-2459 which intercepted 198.50 g/t Au over 1.00m and hole P22-2460 which intercepted 43.30 g/t Au over 1.50m – both at similar elevations as previously planned stopes.
Holes drilled from BM4/22 were successful in identifying gold mineralization in a previously undrilled area, as evidenced by hole P22-2449 which intercepted 14.70 g/t Au over 2.00m. Hole P22-2453 intercepted 11.75 g/t Au over 1.00m adjacent to a previously planned stope to the north, implying an extension of mineralization.
In addition to mineralization being identified in the 150 metre gap zone, mineralization at the Day Zone remains open to the north and south.
Figure 2 – https://www.globenewswire.com/NewsRoom/AttachmentNg/d2c9aa71-319b-4733-b98d-35107898db83
Figure 3 – https://www.globenewswire.com/NewsRoom/AttachmentNg/81e291f0-753f-4a6e-88e3-d130c685f809
Table 1 – Day Zone drill results
Hole # | Azimuth
/dip |
From
(m) |
To
(m) |
Width
(m) |
Au (g/t) |
Ag (g/t) |
P22-2449 | 88/-43 | 38.00 | 46.00 | 8.00 | 6.13 | 2.95 |
incl. | 38.00 | 40.00 | 2.00 | 14.70 | 4.00 | |
and | 88.00 | 89.53 | 1.53 | 7.84 | 14.80 | |
P22-2450 | 88/-51 | 55.62 | 59.75 | 4.13 | 1.21 | 5.85 |
P22-2451 | 106/-54 | 14.00 | 20.00 | 6.00 | 3.57 | 3.70 |
incl. | 14.00 | 16.00 | 2.00 | 7.74 | 7.30 | |
and | 41.00 | 45.50 | 4.50 | 5.24 | 2.51 | |
incl. | 43.30 | 45.50 | 2.20 | 7.74 | 2.00 | |
P22-2452 | 106/-46 | 51.40 | 54.02 | 2.62 | 5.28 | 6.93 |
incl. | 53.00 | 54.02 | 1.02 | 9.14 | 8.30 | |
and | 74.63 | 75.60 | 0.97 | 2.03 | 4.20 | |
and | 84.00 | 85.13 | 1.13 | 1.97 | 3.50 | |
P22-2453 | 52/-45 | 60.59 | 71.50 | 10.91 | 4.02 | 4.36 |
incl. | 64.50 | 65.50 | 1.00 | 11.75 | 10.70 | |
P22-2454 | 54/-55 | 56.07 | 57.00 | 0.93 | 1.38 | 2.70 |
P22-2455 | 10/-75 | 8.00 | 10.00 | 2.00 | 1.42 | 4.30 |
and | 49.00 | 58.39 | 9.39 | 2.18 | 9.76 | |
incl. | 57.42 | 58.39 | 0.97 | 9.02 | 29.10 | |
P22-2456 | 55/-64 | 9.29 | 10.23 | 0.94 | 1.17 | 2.20 |
and | 52.00 | 54.00 | 2.00 | 6.89 | 5.70 | |
and | 60.35 | 64.35 | 4.00 | 1.43 | 3.33 | |
P22-2457 | 72/-45 | 4.88 | 7.00 | 2.12 | 1.53 | 2.90 |
and | 49.50 | 50.80 | 1.30 | 1.08 | 2.40 | |
and | 76.74 | 77.80 | 1.06 | 1.21 | 4.70 | |
P22-2458 | 93/-45 | 24.86 | 27.00 | 2.14 | 1.10 | 3.80 |
and | 55.00 | 59.00 | 4.00 | 1.23 | 5.53 | |
and | 62.00 | 62.97 | 0.97 | 1.33 | 3.80 | |
and | 69.40 | 71.50 | 2.10 | 1.45 | 4.70 | |
and | 83.00 | 84.55 | 1.55 | 1.21 | 7.60 | |
and | 92.61 | 96.00 | 3.39 | 1.52 | 6.69 | |
P22-2459 | 110/-65 | 32.02 | 33.90 | 1.88 | 1.88 | 14.50 |
and | 42.50 | 50.50 | 8.00 | 26.56 | 10.00 | |
incl. | 42.50 | 43.50 | 1.00 | 198.50 | 59.60 | |
and | 54.50 | 55.50 | 1.00 | 1.89 | 9.90 | |
and | 59.50 | 64.00 | 4.50 | 2.19 | 3.78 | |
P22-2460 | 132/-79 | 39.18 | 40.59 | 1.41 | 2.00 | 7.40 |
and | 43.00 | 45.00 | 2.00 | 1.21 | 0.70 | |
and | 55.00 | 56.50 | 1.50 | 43.30 | 20.90 |
Note: True widths are estimated to be between 60% to 80% of reported interval widths.
Big Missouri drilling
At the end of the 2022 surface drill season at PGP, four drill holes totaling 495 metres were drilled from pad BM6/22 at the Big Missouri deposit. These holes were meant for in-fill and exploration purposes around existing planned stopes. High-grade gold mineralization was intercepted in and near planned stopes, including in hole P22-2464 which intercepted 8.84 g/t Au over 5.07m including 21.40 g/t Au over 1.00m, and hole P22-2462 which intercepted 9.11 g/t Au over 4.19m including 16.95 g/t Au over 1.00m.
Figure 4 – https://www.globenewswire.com/NewsRoom/AttachmentNg/d65415b4-1957-4a4b-bffd-3c39ea4d7a21
Table 2 – Big Missouri drill results
Hole # | Azimuth
/dip |
From
(m) |
To
(m) |
Width
(m) |
Au (g/t) |
Ag (g/t) |
P22-2461 | 261/-66 | 95.44 | 97.10 | 1.66 | 1.13 | 1.50 |
and | 129.00 | 130.15 | 1.15 | 1.83 | 1.50 | |
P22-2462 | 275/-66 | 73.90 | 75.29 | 1.39 | 5.57 | 10.60 |
and | 92.43 | 96.62 | 4.19 | 9.11 | 10.88 | |
incl. | 92.43 | 93.57 | 1.14 | 16.95 | 20.90 | |
P22-2463 | 275/-55 | 83.08 | 84.08 | 1.00 | 3.96 | 2.40 |
and | 86.08 | 87.08 | 1.00 | 2.67 | 4.50 | |
and | 101.35 | 102.35 | 1.00 | 6.97 | 5.70 | |
P22-2464 | 285/-57 | 84.04 | 85.06 | 1.02 | 3.16 | 5.20 |
and | 87.93 | 93.00 | 5.07 | 8.84 | 10.45 | |
incl. | 91.00 | 92.00 | 1.00 | 21.40 | 20.10 | |
and | 104.00 | 109.75 | 5.75 | 4.47 | 4.90 | |
incl. | 106.33 | 108.51 | 2.18 | 8.73 | 6.50 |
Note: True widths are estimated to be between 60% to 80% of reported interval widths.
Table 2 – Drill pad locations
Pad # | UTM N | UTM E | Elevation (masl) | Hole no. |
BM4/22 | 435816 | 6219436 | 926.0 | 2449-2454 |
BM5/22 | 435845 | 6219375 | 933.0 | 2455-2460 |
BM6/22 | 436464 | 6219232 | 1,014.0 | 2461-2464 |
Qualified Person
Lawrence Tsang, P.Geo., the Company’s Senior Geologist provides the field management for the PGP exploration program. John Kiernan, P.Eng., Chief Operating Officer of the Company is the Company’s Qualified Person (QP) as defined by National Instrument 43-101 and has reviewed and approved the technical contents of this news release.
Quality Assurance/Quality Control
Analytical work is being carried out by ALS Canada Ltd. Ascot’s quality-assurance and quality-control program includes the use of analytical blanks to monitor for cross contamination, certified reference material standards to assess analytical accuracy, and duplicate samples to quantify sampling precision. This is in addition to the internal quality assurance program employed by ALS.
Samples are dried and weighed by ALS. They are then crushed to 75% passing 2mm, with 250g split and pulverized to 85% passing 75µm. Samples are processed at the ALS preparation lab in Terrace and sent to ALS in North Vancouver for analysis. There, all samples are dissolved using four acid digestion with an ICP-AES finish and fire assay with AA finish for gold. Samples over 100ppm silver are digested with aqua regia and then volumetrically diluted before an ICP-AES or AA finish (up to 1,500ppm). Samples over 1,500ppm silver are fire assayed with a gravimetric finish. Samples over 10ppm gold are fire assayed with a gravimetric finish. Identified or suspected metallic gold or silver are subjected to “metallics” assays. Sampling and storage is located at the Company’s secure facility in Stewart, British Columbia.
About Ascot Resources Ltd.
Ascot is a Canadian junior exploration and development company focused on re-starting the past producing Premier gold mine, located on Nisga’a Nation Treaty Lands, in British Columbia’s prolific Golden Triangle. Concurrent with progressing the development of Premier, the Company continues to successfully explore its properties for additional high-grade underground resources. Ascot is committed to the safe and responsible development of Premier in collaboration with Nisga’a Nation as outlined in the Benefits Agreement.
Red Pine Exploration Inc. (TSX-V: RPX) (OTCQB: RDEXF) is pleased ... READ MORE
F3 Uranium Corp. (TSX-V: FUU) (OTC Pink: FUUFF) is pleased to ann... READ MORE
Collective Mining Ltd. (NYSE: CNL) (TSX: CNL) is pleased to ann... READ MORE
Aris Mining Corporation (TSX: ARIS) (NYSE-A: ARMN) announces t... READ MORE
Staffing in place and operations shakedown underway Rare E... READ MORE