The Prospector News

Appia Announces Outstanding Re-Assayed Diamond Drill Results Including 100 Metres Averaging 3,577 PPM TREO at Its PCH Ionic Clay Project, Brazil

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Appia Announces Outstanding Re-Assayed Diamond Drill Results Including 100 Metres Averaging 3,577 PPM TREO at Its PCH Ionic Clay Project, Brazil

 

 

 

 

 

Key Weighted Average TREO Concentrations: 0-100 Metres 3,577 PPM, 0-18 Metres 9,445 PPM, Including 7 Metres 18,275 PPM, 3 Metres 25,317 PPM, and 1.5 Metres 30,642 PPM

 

Appia Rare Earths & Uranium Corp. (CSE: API) (OTCQX: APAAF) (FSE: A0I0) (MUN: A0I0) (BER: A0I0) is pleased to report significant assay results from its discovery Diamond Drill Hole (DDH) PCH-F01, located within the highly prospective Target IV zone at its PCH ionic adsorption clay project in Brazil. Appia has re-assayed the entire hole PCH-F01 as part of its due diligence, and assay results from surface to 18 metres include 9,445 parts per million (ppm) Total Rare Earth Oxide, 2,786 ppm Magnet Rare Earth Oxide (MREO), 787 ppm Heavy Rare Earth Oxide, and 8,658 ppm Light Rare Earth Oxide.

 

DDH PCH-F01, originally drilled vertically to 100 metres depth during the vendors’ exploration campaign in 2021, has been re-assayed and updated with the nomenclature DDH PCH-F01R. This hole intercepted a high-grade mineralized weathered profile to bedrock, spanning from the surface to 18 metres. The re-assaying confirmed the presence of continued high-grade mineralization throughout the intercepted hard rock zone, with the mineralization continuing until the end of drill hole at 100 metres depth.

 

Highlights:

  • Composite results across 100 metres:
    • 3,577 ppm or 0.36% TREO including 968 ppm or 0.10% MREO, 293 ppm or 0.03% HREO, and 3,284 ppm or 0.33% LREO.
  • Composite results from 0-18 metres:
    • 9,445 ppm or 0.94% TREO including 2,786 ppm or 0.28% MREO, 787 ppm or 0.08% HREO, and 8,658 ppm or 0.86% LREO.
  • Composite results 0-7 metres:
    • 18,275 ppm or 1.83% TREO, 5,640 ppm or 0.56% MREO, 1,550 ppm or 0.16% HREO, and 16,725 ppm or 1.67% LREO
      • Including 3 metres at 25,317 ppm or 2.53% TREO, 8,473 ppm or 0.85% MREO, 2,102 ppm or 0.21% HREO, and 23,215 ppm or 2.32% LREO from 1.5m to 4.5m; and
      • Including 1.5 metres at 30,642 ppm or 3.06% TREO, 11,219 ppm or 1.12% MREO, 2,434 ppm or 0.24% HREO, and 28,208 ppm or 2.82% LREO from 2m to 3.5m.

 

DIAMOND DRILLHOLE PCH-F01R (ASSAY IN OXIDE_PPM, BY SGS LAB)
Interval 0-18m with 0-7m with 1.5-4.5m with 2.0-3.5m 18-100m with 27-47m with 51-78 with 82-100m 0-100m
TREO 9,445         18,275            25,317            30,642              2,289            2,695 2,815   2,165 3,577
MREO 2,786          5,640            8,473             11,219                568  711 680               519  968
LREO   8,658 16,725          23,215          28,208            2,105            2,444 2,600            2,009 3,284
HREO   787 1,550 2,102 2,434      184  251  215 156 293
Magnet  REO
Interval 0-18m with 0-7m with 1.5-4.5m with 2.0-3.5m 18-100m with 27-47m with 51-78 with 82-100m 0-100m
Nd2O3 1,624 3,202    4,440   5,150 361 446 434 333 589
Pr6O11    751      1,627             2,923  4,780 111             134 134 104 226
Sm2O3 246  487         678               786                  58  77   68  52   92
Dy2O3    139 272 361 421       32  45 37  26    51
Tb4O7  27 53      71  82      6                  8  7  5 10
Light – LREO
Interval 0-18m with 0-7m with 1.5-4.5m with 2.0-3.5m 18-100m with 27-47m with 51-78 with 82-100m 0-100m
La2O3 2,167 4,119 5,730  6,784      550      626      683     529   841
CeO2 4,116  7,777 10,122             11,495 1,082 1,237  1,349 1,044 1,628
Pr6O11    751 1,627  2,923 4,780 111     134       134     104       226
Nd2O3 1,624 3,202 4,440  5,150    361    446       434     333    589
Heavy – HREO
Interval 0-18m with 0-7m with 1.5-4.5m with 2.0-3.5m 18-100m with 27-47m with 51-78 with 82-100m 0-100m
Sm2O3  246   487 678  786         58   77  68              52     92
Eu2O3    65      127 175                  202   16     22  19                    14  25
Gd2O3    181 359 492                  565 43    60     50                    37 68
Tb4O7   27   53  71      82     6          8    7  5 10
Dy2O3        139  272 361                  421 32 45  37   26 51
Ho2O3   26    51 66                    76   5  8    6                      4  9
Er2O3 60 117 151                  175 14  19 16     10 22
Tm2O3           7    14  18                    21     1  2       2                      1  3
 Yb2O3 32  63   81   94   8 10     9 6  12
Lu2O3     3   7     8   10          1         1      1       1      1

 

Table 1 – Diamond Drill Hole PCH-F01R Composite Assay Results.

 

Click HERE for a complete listing of the full assay results.

 

“These results from DDH PCH-F01R confirm the presence of an alkaline breccia with significant concentrations of REE throughout the hard rock beneath the clay and saprolite zones,” commented Stephen Burega, President. He continued, “DDH PCH-F01R is situated northeast of the previously reported PCH RC-063 hole, located in the southwest quadrant of Target IV. This Reverse Circulation (RC) hole revealed TREO results as high as 92,758 ppm from 10-to-12 metres, with a total weighted average of 38,655 ppm TREO from 0 to 24 metres, remaining open at depth.” (See press release dated January 16, 2024 HERE)

 

Burega continued, “We have seen remarkable grades across Target IV, spanning from RC to DDH results. Numerous intercepts surpass 10,000 ppm TREO, including PCH-F01R, where the results support the ultra-high grade weathered profile. The team has identified two high-grade zones within Target IV, approximately 300 metres apart, interconnected with mineralization at shallow depths.”

 

Figure 1 – Strip log of DDH PCH-F01R

 

 Map 1 – Map of RC drilling location.

 

 Image 1 – Photograph of Alkaline Breccia from DDH PCH-F01

 

 Table 2 PCH-F01R collar details – SIRGAS 2000 – UTM zone 22S.

 

Appia is committed to transparent communication and will continue to provide timely updates on the progress of our exploration efforts and the development of a maiden Mineral Resource Estimate in partnership with SGS Canada. We are dedicated to sharing advancements in our exploration program and will release assay results from RC, DDH, and auger drilling as they become available.

 

Background on the PCH Project

 

The PCH Project is located within the Tocantins Structural Province in the Brasília Fold Belt, more specifically, the Arenópolis Magmatic Arc. The PCH Project is 40,963.18 hectares in size and located within the Goiás State of Brazil. It is classified as an alkaline intrusive rock occurrence with highly anomalous REE and Niobium mineralization. This mineralization is related to alkaline lithologies of the Fazenda Buriti Plutonic Complex and the hydrothermal and surface alteration products of this complex by supergene enrichment in a tropical climate. The positive results of the recent geochemical exploration work carried out to date indicates the potential for REEs, niobium (Nb), scandium (Sc) and cobalt (Co) within lateritic ionic adsorption clays.

 

QA/QC

 

The historic diamond drill holes, including DDH-PCHF01, are NQ size (47.6 mm diameter) vertical and reported intervals are true widths. It has been sampled at approximately one metre intervals, resulting in average sample sizes of approximately 1 – 5 kg. Drill core is geologically logged, photographed, marked for sampling and cut by diamond saw. One half of the core is taken for sampling at Appia’s logging facility, bagged in a resistant plastic bag, labeled, photographed, and stored for shipment. The remaining half is stored at Appia’s secure core storage facility.

 

Appia re-assayed the entire hole using pulp from original samples and updated nomenclature to PCH-F01R. The samples were sent to the SGS laboratory in Vespasiano, Minas Gerais. In addition to the internal QA/QC of the SGS Lab, Appia has used its own control samples in each batch sent to the laboratory.

 

Quality control samples, such as blanks, duplicates, and standards (CRM) are inserted into each analytical run. For all analysis methods, the minimum number of QA/QC samples is one standard, one duplicate and one blank, introduced every batch. The rigorous procedures implemented during the sample collection, preparation, and analysis stages underscore the robustness and reliability of the analytical results obtained.

 

All analytical results reported herein have passed internal QA/QC review and compilation. All assay results of DDH samples were provided by SGS Geosol, an ISO/IEC 17025:2005 certified laboratory, which performed their measure of the concentration of rare earth elements (REE) analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analytical methods.

 

The technical content in this news release was reviewed and approved by Mr. Don Hains, P.Geo, Consulting Geologist, and a Qualified Person as defined by National Instrument 43-101.

 

About Appia Rare Earths & Uranium Corp. (Appia)

 

Appia is a publicly traded Canadian company in the rare earth element and uranium sectors. The Company is currently focusing on delineating high-grade critical rare earth elements and gallium on the Alces Lake property, as well as exploring for high-grade uranium in the prolific Athabasca Basin on its Otherside, Loranger, North Wollaston, and Eastside properties. The Company holds the surface rights to exploration for 113,837.15 hectares (281,297.72 acres) in Saskatchewan. The Company also has a 100% interest in 13,008 hectares (32,143 acres), with rare earth elements and uranium deposits over five mineralized zones in the Elliot Lake Camp, Ontario. Lastly, the Company holds the right to acquire up to a 70% interest in the PCH Project (See June 9th, 2023 Press Release – Click HERE) which is 40,963.18 ha. in size and located within the Goiás State of Brazil. (See January 11th, 2023 Press Release – Click HERE)

 

Appia has 136.3 million common shares outstanding, 144.1 million shares fully diluted.

Posted February 8, 2024

Share this news article

MORE or "UNCATEGORIZED"


McEwen Mining Announces Closing of Flow-Through Financing

McEwen Mining Inc. (NYSE: MUX) (TSX: MUX) is pleased to report it... READ MORE

June 14, 2024

FRONTIER LITHIUM INTERSECTS 136.7M OF 1.32% Li2O AND EXTENDS SPARK PEGMATITE

Frontier Lithium Inc. (TSX-V: FL) (FRA: HL2) (OTCQX: LITOF) is pl... READ MORE

June 14, 2024

ALX Resources Corp. Receives Analytical Results from the Gibbons Creek Uranium Project, Athabasca Basin, Saskatchewan

ALX Resources Corp. (TSX-V: AL) (FSE: 6LLN) (OTC: ALXEF) is pleas... READ MORE

June 13, 2024

enCore Energy Commences Uranium Production at its Second South Texas Project

enCore Energy Corp. (NASDAQ: EU) (TSXV: EU) announced the succes... READ MORE

June 13, 2024

West Red Lake Gold Pours Gold Bar From Madsen Mill Cleanup

West Red Lake Gold Mines Ltd. (TSX-V: WRLG) (OTCQB: WRLGF) is ple... READ MORE

June 13, 2024

Copyright 2024 The Prospector News