Talisker Resources Ltd. (TSX: TSK) (OTCQX: TSKFF) is pleased to announce high-grade results on a shallow portion of the 55 Vein within the Bralorne West block.

Key Points:

• Hole SB-2022-013 is located within the Bralorne West block and focuses on near surface mineralization within the 55 vein.
• Highlighted by 31.44 g/t Au over 3.9 metres within a larger mineralized envelope of 11.84 g/t Au over 12.45 metres.
• The vein intersection is from 85.55 metres to 98 metres below the surface and increases the known mineralized envelope on the 55 vein (>3 gram x metres) to 450 metres x 480 metres.
• The total mineralized drill intercepts on the 55 vein to date is 29.
• Talisker drilling to date at the Bralorne Gold Project has produced 367 vein intersections with a combined weighted average diluted grade of 9.01 g/t over an average intersection length of 1.75 metres.

Matt Filgate, Vice President, Corporate Development of Talisker, commented, “Today’s results highlight the growth potential of the current veins, demonstrating the excellent grade continuity and the ability for rapid resource expansion within the known veins. As we continue to expand our drilling along strike and down plunge of known mineralization, we expect to see the mineralizing footprint grow rapidly.”

Three diamond drills are now operating at the Bralorne Gold Project. A total of 138,741 metres (284 holes) has been drilled since Talisker initiated drilling at the Project in February 2020. Currently, there are 2420 samples at the assay laboratory, which are expected to be received by the Company shortly.

SB-2022-013 Hole Description:

• Complete assay results received.
• Located in the Bralorne West block and hosted in dioritic intrusive and ultramafics.
• 55 vein intersected from 90.6 to 98.0 metres with visible gold and a mineralized hanging wall halo from 85.55 to 90.60 metres.

Major vein structures intersected are considered classic Bralorne crack-seal quartz-carbonate veins with densely banded sulphide septae. Crack-seal septae host fine-grained arsenopyrite and pyrite mineralization.  Alteration halos consist of strong silica-sericite±mariposite alteration halos.

All reported drill assay results are available on the Company’s website at the following link: https://taliskerresources.com/bralorne-gold-project-released-drill-results/.

Qualified Person

The technical information contained in this news release relating to the drill results at the Bralorne Gold Project has been approved by Leonardo de Souza (BSc, AusIMM (CP) Membership 224827), Talisker’s Vice President, Exploration and Resource Development, who is a “qualified person” within the meaning of National Instrument 43-101, Standards of Disclosure for Mineral Projects.

About Talisker Resources Ltd.

Talisker is a junior resource company involved in the exploration of gold projects in British Columbia, Canada. Talisker’s projects include two advanced stage projects, the Bralorne Gold Complex and the Ladner Gold Project, both advanced stage projects with significant exploration potential from historical high-grade producing gold mines, as well as its Spences Bridge Project where the Company holds ~85% of the emerging Spences Bridge Gold Belt and several other early-stage Greenfields projects. With its properties comprising 304,931 hectares over 500 claims, three leases and 197 crown grant claims, Talisker is a dominant exploration player in the south-central British Columbia.

Sample Preparation and QAQC

Drill core at the Bralorne Gold Project is drilled in HQ to NQ size ranges (63.5mm and 47.6mm, respectively). Drill core samples are a minimum of 50 cm and a maximum of 160 cm long along the core axis. Samples are focused on an interval of interest, such as a vein or zone of mineralization.  Shoulder samples bracket the interval of interest such that a total sampled core length of not less than 3m both above and below the interval of interest must be assigned. Sample QAQC measures of unmarked certified reference materials (CRMs), blanks, and duplicates are inserted into the sample sequence and makeup 9% of the samples submitted to the lab for holes reported in this release. ALS Global performs sample preparation and analyses in North Vancouver, British Columbia.  Drill core sample preparation includes drying in an oven at a maximum temperature of 60°C, fine crushing of the sample to at least 70% passing less than 2 mm, sample splitting using a riffle splitter, and pulverizing a 250 g split to at least 85% passing 75 microns (ALS code PREP-31). Gold in diamond drill core is analyzed by fire assay and atomic absorption spectroscopy (AAS) of a 50g sample (ALS code Au-AA26), while multi-element chemistry is analyzed by 4- Acid digestion of a 0.25 g sample split with detection by inductively coupled plasma mass spectrometer (ICP-MS) for 48 elements (Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn, Zr). Gold assay technique (ALS code Au-AA26) has an upper detection limit of 100 ppm. Any sample that produces an over-limit gold value via the gold assay technique is sent for gravimetric finish (ALS method Au-GRA22) which has an upper detection limit of 10,000 ppm Au.

Figure 1: SB-2022-013 hole location within the Bralorne West block. (CNW Group/Talisker Resources Ltd)

Figure 2: SB-2022-013 cross section with vein intersections and grade. (CNW Group/Talisker Resources Ltd)

Figure 3: Vein 55 long section. (CNW Group/Talisker Resources Ltd)