The Prospector News

Auro Intersects 679.9m Grading 0.44 g/t Au and 0.14% Copper in Previously Untested Target at the Santa Barbara Gold-Copper Project, Ecuador

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Auro Intersects 679.9m Grading 0.44 g/t Au and 0.14% Copper in Previously Untested Target at the Santa Barbara Gold-Copper Project, Ecuador

 

 

 

 

 

Auro Metals Inc. (TSX-V: AURO) (OTCQB: AURFF) is pleased to announce assay results for the first batch of drillholes from the 2026 Phase II Drill Program at the Santa Barbara Gold-Copper Project located in the Zamora-Chinchipe Province in southeastern Ecuador. This news release contains the assay results of four drillholes (DSB-76 through DSB-79) from Phase II and hole DSB-74 from the Phase I Drill Program (Figure 1 for drillhole locations).

 

SUMMARY OF DRILL RESULTS

 

Step-out holes:

  • Drillhole DSB-79, a discovery hole, intersected 679.9 metres (“m”) grading 0.44 grams per tonne (“g/t”) gold (“Au”) and 0.14% copper (“Cu”) from 0.0m to 679.9m.
    • Approximately 380m step-out from historical hole DSB-35. Drilled in the untested Santa Barbara Central area, hole DSB-79 expands the gold-copper porphyry system and converts what was largely waste material into mineralized gold-copper material within the pit shell as defined by the Mineral Resource Estimate update effective March 23, 2026 (Figure 2).
  • Drillhole DSB-74, drilled in Santa Barbara South, intersected 669.14m grading 0.55 g/t Au and 0.09% Cu from 72.53m to 741.67m in the northern portion of Santa Barbara South.
    • Approximately 70m step-out to the east of hole DSB-73, intersected much broader mineralization than up-dip holes DSB-63 and DSB-73 (Figure 3).

 

In-fill/down-dip extension holes, Santa Barbara South:

  • Drillhole DSB-76 intersected 622.9m grading 0.67 g/t Au and 0.12% Cu from 299.5m to 922.4m, including 92.0m grading 1.39 g/t Au and 0.18 g/t Cu from 396.0m to 488.0m and 33.36m grading 1.45 g/t Au and 0.22% Cu from 830.31m to 863.67m.
    • Tested the down-dip extension of holes DSB-67 and DSB-71, intersecting broader and higher-grade mineralization (Figure 4).
  • Drillhole DSB-77 intersected 234.0m grading 0.62 g/t Au and 0.09% Cu from 28.0m to 262.0m, including 108.0m grading 1.03 g/t Au and 0.11% Cu from 56.0m to 164.0m (Figure 9 for section).
  • Drillhole DSB-78 intersected 360.5m grading 0.81 g/t Au and 0.12% Cu from 52.0m to 412.5m, including 221.9m grading 1.02 g/t Au and 0.13% Cu from 184.6m to 406.5m in the southern portion of Santa Barbara South (Figure 11 for section).

 

“This latest batch of drillholes expands the gold-copper system from Santa Barbara South to Central with a 380m step-out hole,” said Victor Feng, CEO of Auro. “Hole DSB-79 has revealed resource expansion potential within what is currently classified as waste material inside the pit shell and could improve the economic potential of the gold-copper system. Testing this newly discovered area will be one of the areas of focus for the Phase II program.”

 

The Phase II Drill Program is ongoing with three additional drill rigs mobilized to site, bringing the total number of drill rigs to seven. To date, a total of 7,042m has been completed in nine holes, out of the 20,000m – Phase II Program.

 

Assay results for the five holes are listed in Table 1. Drillhole specifications are listed in Table 2 and hole locations are shown in Figure 1.

 

Table 1 Summary of Drill Intercepts

 

12

0

Hole_ID Depth_from Depth_to Interval_m Au_g/t Cu_% AuEq_g/t
DSB-74 72.53 741.67 669.14 0.55 0.09 0.58
DSB-76 299.50 922.40 622.90 0.67 0.                                                                                                                                                     .70
incl. 396.00 488.00 92.00 1.39 0.18 1.44
incl. 830.31 863.67 33.36 1.45 0.22 1.50
DSB-77 28.00 262.00 234.00 0.62 0.09 0.64
incl. 56.00 164.00 108.00 1.03 0.11 1.06
DSB-78 52.00 412.50 360.50 0.81 0.12 0.84
incl. 184.60 406.50 221.90 1.02 0.13 1.05
DSB-79 0.00 679.90 679.90 0.44 0.14 0.48

 

Notes:

  1. Drill location, altitude, azimuth, and dip of drillholes are provided in Table 2.
  2. Drill intercept is core length, and grade is length weighted. True width of mineralization is unknown.
  3. A cut-off of 0.2 g/t Au is applied for calculation of drill intercept.
  4. Calculation of gold equivalent (“AuEq”) is defined as AuEq (g/t) = Au (g/t) + Cu (%) x 0.259, based on a gold price of US$3,200/oz, and copper price of US$12,000/t metal, assuming average processing recoveries of 85.5% Au and 19.6% Cu. It is the Company’s view that all elements in the metal equivalent calculations have a reasonable potential to be recovered and sold. Rounding may cause minor discrepancies in the AuEq column.

 

 Figure 1: Plan view of drillholes

 

 Figure 2: Section E-E’ showing drillhole DSB-79 in relation to mineralized blocks and waste material within the resource pit shell

 

DESCRIPTION OF HOLES

 

Hole DSB-74 is a step-out about 70m east from DSB-73 testing the down-dip extension of mineralization intercepted in holes DSB-63 and DSB-73. This hole intersected 669.14m (from 72.53m to 741.67m) grading 0.55 g/t Au and 0.09% Cu (Figure 3). Partial assay results from the upper 645.0m were reported in the previous release (please refer to the Company’s news release on October 7, 2026). Results from this hole demonstrate that mineralization gets wider in the down-dip direction of holes DSB-63 and DSB-73.

 

Figure 3: Section A-A’

 

Hole DSB-76 was drilled more than 100m below hole DSB-71, testing the down-dip extension of mineralization in the central area of Santa Barbara South. This hole intersected 622.9m (from 299.5m to 922.4m) grading 0.67 g/t Au and 0.12% Cu, including 92.0m (from 396.0m to 488.0m) grading 1.39 g/t Au and 0.18% Cu (Figure 4) and 33.36m (from 830.31m to 863.67m) grading 1.45 g/t Au and 0.22% Cu. The drill results from this hole demonstrate that high grade mineralization continues at depth and the limit is not yet defined from drill data available to date.

 

Lithology in the first 71m from the drill collar is post mineralization conglomerate and volcanoclastic sediments from 71m to 412m. From 412m to 687.5m, lithology is dominated by dark basaltic andesite locally cut by diorite porphyry and both rock types are strongly altered and mineralized (Figure 5 and 6). From 687.5m to the end of hole at 1007.7m, lithology is dominated by diorite porphyry and hornblende diorite locally intercalated with dark basaltic andesite intervals and mineralization is well developed in andesite intervals and nearby diorite (Figure 7 and 8).

 

Figure 4: Section B-B’

 

Figure 5: Core photo of DSB-76, Box 154, from 432.48m to 435.42m, mineralized diorite porphyry. 

 

 Figure 6: Core photo of DSB-76, Box 224, from 627.7m to 630.4m, mineralized dark basaltic andesite cut by quartz veining, with pyrite and chalcopyrite in forms of dissemination and veinlets as well as patches of brownish secondary biotite. 

 

 Figure 7: Core photo of DSB-76, Box 297, from 836.96m to 839.73m, mineralized dark basaltic andesite cut by quartz veining, with pyrite and chalcopyrite in forms of dissemination and veinlets.

 

 Figure 8: Core photo of DSB-76, Box 304, from 856.63m to 859.35m, mineralized diorite porphyry cut by quartz veining, with pyrite and chalcopyrite in forms of dissemination and veinlets.

 

Hole DSB-77 is an infill hole between hole DSB-58 and DSB-34 at the north end of Santa Barbara South. This hole intersected 234.0m (from 28.0m to 262.0m) grading 0.62 g/t Au and 0.09% Cu, including 108.0m (from 56.0m to 164.0m) grading 1.03 g/t Au and 0.11% Cu (Figure 9). The upper portion until a depth of 195.8m is dominated by dark basaltic andesite and is well mineralized (Figure 10). Lithology further down until the end of the hole is mainly hornblende diorite where the intensity of mineralization decreased.

 

Figure 9: Section C-C’

 

 Figure 10: Core photo of DSB-77, Box 37, from 116.76m to 119.45m, dark basaltic andesite cut by andesite porphyry (the 2nd and the 3rd tray in the box) and both well mineralized with pyrite and chalcopyrite in forms of dissemination and veinlets. 

 

Hole DSB-78 is an infill hole between DSB-57, and DSB-23 and DSB-68 in the southern portion of Santa Barbara South. This hole intersected 360.5m (from 52.0m to 412.5m) grading 0.81 g/t Au and 0.12% Cu, including 221.9m (from 184.6m to 406.5m) grading 1.02 g/t Au and 0.13% Cu (Figure 11). The hole was completed to a depth of 786.0m, with lithology in the upper portion dominated by dark basaltic andesite cut by dykes of diorite porphyry, and the lower portion until the end of hole in volcano-sedimentary rock with shear zone between the two rock types. Mineralization is very strong in the upper andesite (Figure 12) but drops sharply beyond the shear structure into the lower sediments.

 

Figure 11: Section D-D’

 

 Figure 12: Core photo of DSB-78, Box 78, from 216.28m to 219.06m, mineralized dark basaltic andesite cut by quartz veining, with pyrite and chalcopyrite in forms of dissemination and veinlets.

 

Hole DSB-79 demonstrates the existence of porphyry style mineralization in the Santa Barbara Central area and could expand the economic potential of the Project. Similar to holes in Santa Barbara South, the rock type in hole DSB-79 is mainly dark basaltic andesite cut by intrusive dykes of diorite porphyry and hornblende diorite, with abundant patches of secondary biotite (potassic alteration), chalcopyrite, pyrite and pyrrhotite in forms of both dissemination and veinlets (Figure 13).

 

Figure 13: Core photo of DSB-79, Box 113, from 335.2m to 337.84m, mineralized dark basaltic andesite cut by quartz veining, with pyrite and chalcopyrite in forms of dissemination and veinlets.

 

Table 2 Summary of Drillholes of Santa Barbara Gold-Copper Project

 

Hole_ID Easting Northing Altitude Depth_m Azimuth (°) Dip (°) Assay Results
DSB-54 765463.70 9544445.53 931.38 705.70 260 -82 complete
DSB-55 765539.93 9544383.21 940.76 285.50 240 -45 complete
DSB-56 765417.68 9544434.13 960.10 274.85 260 -47 complete
DSB-57 765541.01 9544245.95 973.91 315.70 240 -60 complete
DSB-58 765488.12 9544749.44 920.64 274.80 260 -63 complete
DSB-59 765466.41 9544269.27 1030.67 706.55 60 -80 complete
DSB-60 765434.27 9544155.26 1060.67 802.65 60 -60 complete
DSB-61 765557.28 9544184.88 990.14 720.60 236 -77.5 complete
DSB-62 765394.10 9544671.12 892.48 200.00 260 -55 complete
DSB-63 765384.50 9544605.71 891.07 253.90 260 -60 complete
DSB-64 765356.92 9544537.66 924.00 199.35 260 -60 complete
DSB-65 765463.12 9544268.74 1030.43 379.80 240 -70 complete
DSB-66 765427.24 9544493.67 909.15 312.15 260 -60 complete
DSB-67 765258.71 9544399.36 1040.33 599.00 80 -52 complete
DSB-68 765596.09 9544275.58 983.66 1282.00 240 -85 complete
DSB-69 765556.17 9544523.38 922.05 490.05 260 -63 complete
DSB-70 765402.13 9544550.79 900.61 306.60 260 -60 complete
DSB-71 765258.66 9544399.40 1040.63 745.00 80 -63 complete
DSB-72 765493.47 9544499.79 905.72 400.90 260 -60 complete
DSB-73 765509.76 9544622.40 927.82 485.65 260 -60 complete
DSB-74 765592.12 9544640.03 961.68 856.95 260 -60 complete
DSB-75 765549.35 9544694.97 935.42 449.65 260 -65 complete
DSB-76 765180.64 9544385.58 1014.68 1007.70 80 -66 complete
DSB-77 765574.10 9544756.84 953.32 322.80 260 -63 complete
DSB-78 765596.09 9544275.58 983.66 786.00 240 -70 complete
DSB-79 765514.47 9544910.49 921.63 987.65 120 -50 complete
DSB-80 765598.35 9544276.79 983.88 1002.90 60 -78 pending
DSB-81 765671.41 9544713.25 997.57 739.70 260 -72 pending
DSB-82 765331.43 9544045.85 1045.56 1156.05 60 -60 pending
DSB-83 765514.80 9544910.43 921.36 578.45 120 -78 pending
DSB-87 765511.08 9544912.45 921.39 461.20 300 -45 pending
Total 18089.80

 

Notes:

  1. Drill collar coordinate system is PSAD56 UTM Zone 17S.
  2. Coordinate of drill collar is picked with Real Time Kinematics (RTK) GPS.

 

QUALITY ASSURANCE AND QUALITY CONTROL

 

All samples in respect of the exploration program at the Project discussed in this news release were shipped in securely-sealed bags by a chartered commercial truck, directly from the field to the sample preparation facilities of SGS in Guayaquil, Ecuador for preparation, and to SGS in Lima, Peru for geochemical analysis. SGS is a global leader in inspection, verification, testing, and certification. It is an ISO/IEC 17025 accredited laboratory independent from Auro. All samples go through fire assay (SGS code FAA313) for gold and multi-acid digestion ICP-AES multi-element assay (SGS code ICP40B) for other elements. Certified reference materials, various types of blank samples and duplicate samples are inserted into normal drill core sample sequences prior to delivery to laboratory for preparation and analysis. The overall ratio of quality control samples in sample sequences is approximately 20%.

 

QUALIFIED PERSON

 

The scientific and technical information contained in this news release has been reviewed and approved by Alex Zhang, P. Geo., a Director of the Company, who is a Qualified Person for the purposes of National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”). The Qualified Person has verified the information disclosed herein, including the sampling, preparation, security and analytical procedures underlying such information, and is not aware of any significant risks and uncertainties that could be expected to affect reliability or confidence in the information discussed herein.

 

ABOUT AURO METALS INC.

 

Auro Metals Inc. is a mineral exploration company which holds a 100% interest in the Santa Barbara Gold-Copper Project in the Zamora Copper-Gold Belt of southeastern Ecuador. The Santa Barbara Project is a large-scale porphyry system comprising Indicated resources of 29.8 million tonnes grading 0.73 grams per tonne gold and 0.1% copper containing 697,000 ounces gold and 68 million pounds copper, and Inferred resources of 205.7 million tonnes grading 0.52 grams per tonne gold and 0.09% copper containing 3,418,000 ounces gold and 426 million pounds copper. For more detail, see the Company’s Mineral Resource Estimate prepared in accordance with NI 43-101 by SRK Consulting, effective March 23, 2026 which can be found on SEDAR+ and the Company’s website.

 

Posted November 18, 2026

Share this news article

MORE or "UNCATEGORIZED"


UK Export Finance to Consider Export Credit Loan Support of up to CAD $220 Million for First Phosphate Mining Project

First Phosphate Corp. (NASDAQ: PHOS) (CSE: PHOS) (OTCQX: FRSPF) ... READ MORE

November 18, 2026

McFarlane intersects 163 metres grading 0.68 grams per tonne gold at Golden Lake Deposit

Gold Mineralization extended below resource pit shell at Golden L... READ MORE

November 18, 2026

Contango Silver & Gold Intersects 62.97 g/t Gold over 3.92 Meters and Advances Underground Exploration at Lucky Shot

Contango Silver and Gold Inc. (NYSE American: CTGO) (TSX: CTGO) a... READ MORE

November 18, 2026

Goldgroup Reports Third Quarter 2026 Results: Revenue up More than 15-Fold, Cash Reaches $168 Million Following Merger and Financing

Goldgroup Mining Inc. (NYSE American: GORO) (TSX-V: GORO) is plea... READ MORE

November 18, 2026

Midnight Sun Expands Higher-Grade Copper Mineralization Across Dumbwa’s Northern Block

Latest Drilling Intersects 46 Metres at 0.42% Copper including 1... READ MORE

November 18, 2026

Copyright 2026 The Prospector News