
Exploration Drilling Returns High-Grade: 97.9 g/t Au over 1.5 Metres
VIOR INC. (TSX-V: VIO) (OTCQB: VIORF) (FRA: VL51) is pleased to announce that a significant new high-grade gold discovery has been made south of the past-producing Belleterre gold mine from its flagship Belleterre Project in the Abitibi-Témiscamingue region of Quebec. The newly received results also include a new mineralized zone at depth in the Hoskin Zone located north of the former Belleterre mine.
Mathieu Savard, President and Chief Executive Officer of Vior, commented: “These high-grade results arrive just in time as we’re expecting to start our second phase of drilling in the coming weeks. This new discovery at the Lac Guillet shear zone confirms the merits of this high potential area where close to 20,000 meters of systematic drilling is planned during the second half of the year“.
New High-Grade Gold Discovery at Lac Guillet Deformation Zone
Drillhole BV25-141, collared along the Lac Guillet Deformation Zone, intersected:
This interval is located on strike with the QFP-A surface gold showing, approximately 100 metres to the east, originally identified by Vior in 2022 and 2 km south of the former Belleterre Mine. The mineralization is hosted in brecciated volcanic rocks with moderate silicification alteration, accompanied by trace to 0.5% pyrite and pyrrhotite. The result highlights the gold-bearing potential on the north margin of the Lac Guillet corridor, a 250-metre-wide ductile deformation zone with limited historic drilling. Follow-up work is planned to test for lateral and vertical continuity of this zone.
New Gold Zone Discovered at Hoskin Zone
Drillhole BV25-143, targeting the Hoskin Zone, intersected a previously untested gold-bearing interval at approximately 400 metres vertical depth, returning:
The mineralization is hosted in Smokey Grey quartz veins within a biotite-altered mafic volcanic unit, with trace to 3% blebby pyrite and clusters of chalcopyrite and sphalerite. This zone remains open in all directions and demonstrates the potential for depth extension within the Hoskin structural corridor.
These new zones are located within a North-East striking deformation structure, reinforcing the importance of structural control in the development of high-grade gold systems at Belleterre.
Maps showing hole locations and full analytical results are available at www.vior.ca
Table 1 – Drill Core Assay Results
Drill Hole Number |
Interval From (m) |
Interval To (m) |
Interval Width (m) |
Au (g/t) uncut |
Zone |
BV25-141 | 118.5 | 120.0 | 1.5 | 97.9 | Lac Guillet Shear – QFP-A |
BV25-143 | 476.0 | 480.3 | 4.3 | 3.0 | Hoskin |
Including | 478.3 | 479.3 | 1.0 | 10.6 | Hoskin |
Table 2 – Drill Hole Collar Locations
Drill Hole Number |
Azimuth (°) | Dip (°) | Drill Hole Length (m) |
UTM Easting |
UTM Northing |
BV25-141 | 180 | -70 | 258.1 | 674954 | 5251964 |
BV25-143 | 300 | -50 | 492.1 | 675464 | 5254694 |
Advancing Toward Phase 2 Drill Program
With the completion of this first phase of drilling anticipated in the coming weeks, Vior has now drilled over 69,000 metres across the Belleterre district since 2021. The Corporation is preparing to commence its second phase of drilling, which will prioritize follow-up at both Lac Guillet and Hoskin, in addition to testing several high-potential regional and brownfield targets. In the past few weeks Vior received part of its drill permit authorizations and plans to ramp up its drilling activities back to four rigs by the beginning of August.
Quality Control
True widths are estimated at 65-80% of the reported core length intervals. Assays are uncut except where indicated. All NQ core assays reported were obtained by either 1-kg screen fire assay or standard 50 gram fire-assaying-AA finish or gravimetric finish at ALS Laboratories in Val d’Or, Québec or Sudbury, Ontario. The 1-kg screen assay method is used when samples contain coarse gold intervals. Selected samples are also analyzed for multi-elements using an Aqua Regia-ICP-AES method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control (“QA/QC”), and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples to adhere to strict QA/QC guidelines and protocols by the Corporation and the lab.
Qualified Person
The technical content disclosed in this press release was reviewed and approved by Pascal Simard, Vice-President Exploration at Vior, Qualified Person as per NI 43-101.
About Vior Inc.
Vior is a junior mineral exploration corporation based in the province of Quebec, Canada, whose corporate strategy is to generate, explore, and develop high-quality mineral projects in the proven and favourable mining jurisdiction of Quebec. Through the years, Vior’s management and technical teams have demonstrated their ability to discover several gold deposits and many high-quality mineral projects.
Vior is rapidly advancing its flagship Belleterre Gold Project which is a promising district-scale project that includes Quebec’s past-producing high-grade Belleterre gold mine. Vior has conducted extensive surface and compilation exploration at the Belleterre Gold Project and is currently executing on a 100,000 metre drill program.
Figure 1 : Plan map of the Belleterre Project (CNW Group/Vior Inc.)
Altiplano Metals Inc. (TSX-V: APN) (WKN: A2JNFG) is pleased to re... READ MORE
Opus One Gold Corp (TSX-V: OOR) is pleased to announce that dril... READ MORE
Nova Pacific Metals Corp. (CSE: NVPC) (OTCQB: NVPCF) (FSE: YQ10)... READ MORE
Minaurum Gold Inc. (TSX-V: MGG) (OTCQX: MMRGF) (FSE: 78M) i... READ MORE
Eco Earth to acquire the Nord East and Nord West Projects for a t... READ MORE