The Prospector News

UNIGOLD ESTABLISHES 800 METERS OF OXIDE MINERALIZATION STRIKE EXTENT AT SURFACE; SIGNIFICANT RESULTS INCLUDE 20.0 METERS AVERAGING 4.07 G/T AU AND 21.0 METERS AVERAGING 1.93 G/T AU

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

UNIGOLD ESTABLISHES 800 METERS OF OXIDE MINERALIZATION STRIKE EXTENT AT SURFACE; SIGNIFICANT RESULTS INCLUDE 20.0 METERS AVERAGING 4.07 G/T AU AND 21.0 METERS AVERAGING 1.93 G/T AU

 

 

 

 

 

Unigold Inc. (TSX-V:UGD) is pleased to announce the following results from 28 vertical drillholes completed in late 2019 that tested the oxide resource potential at its 100% owned Neita Concession in the Dominican Republic. In conjunction with historical drillholes, trenches and the 2018 test pit program, this drill program has confirmed that oxide mineralization extends over an area measuring approximately 800 meters in length and 150 meters in width to depths between 20 to 30 meters (Ref. Figure 1). The oxide appears to be open to the ENE and further exploration drilling is planned to evaluate the potential to expand the oxide footprint. Significant intersections include:

 

Candelones Connector     Candelones Main  
DCZ19-56 23.0 meters @ 1.37 g/t Au   DC19-154 20.0 meters @ 4.07 g/t Au
DCZ19-57 21.0 meters @ 1.08 g/t Au   DC19-153 31.6 meters @ 1.52 g/t Au
DCZ19-58 21.0 meters @ 1.93 g/t Au   DC19-148 30.3 meters @ 1.33 g/t Au

 

A complete summary of all drill results is provided in Table 1.0.

 

Joe Hamilton, Chairman and CEO of Unigold notes: “Our results have confirmed that the oxide mineralization offers a minimum 800 meters of potential strike extent and measures between 150 to 200 meters in width. Intensely oxidized rock extends from surface to depths of 20 to 30 meters. Gold grades throughout the oxide zone are homogenous with few outliers, averaging between 0.75 to 0.95 g/t gold. Previous metallurgical results indicated recoveries in excess of 97% from oxide mineralization collected at the Candelones Main deposit. The 2012 mineral resource estimate included an inferred oxide resource of 112,000 ounces averaging 0.98 g/t Au with a low strip ratio. A test pit program in 2018 demonstrated that the oxide mineralization was free digging to depths of at least five meters, the physical limit of the equipment used during that program. We believe the oxide mineralization offers potential as starter pit, generating early cash flow while underground access is established into higher grade sulphide mineralization. We have collected sufficient material to complete detailed metallurgical testing of the oxide mineralization which should allow process parameters to be established for plant design. Drilling to expand the oxide footprint and establish a measured and indicated mineral resource will be designed when the metallurgical test work is completed. In the meantime, both of our diamond drill rigs are exploring the deeper, higher grade sulphide mineralization at the Candelones Extension deposit.”

 

Figure 1.0 – Longitudinal Plan looking north, Candelones Deposits


https://www.globenewswire.com/NewsRoom/AttachmentNg/6e77a8b6-8aab-4977-a7d9-e3ee0eeb2233

 

The oxide drilling targeted the interpreted center of gravity of the Candelones Main and Connector oxide footprint based on historical surface trenching, diamond drilling and test pits. The Candelones Main oxide strikes WNW and dips to the north at 60 degrees (Ref. Figure 2.0). The Candelones Connector oxide mineralization is interpreted to strike ENE and is currently interpreted to be relatively flat lying (Ref. Figure 2.0).

 

Statistical analyses of the oxide data suggests that the oxide mineralization is relatively homogenous with few extreme outlier values. Over 7000 distinct sample intervals consisting of surface trench samples, drillhole samples and test pit samples fall within the currently interpreted oxide limit. Only six (6), all of which were collected within 2 meters of surface, returned assayed gold grades in excess of 25.0 g/t Au. (Ref. Table 2.0).

 

Table 1.0 – Summary of Candelones Main and Connector Oxide Drilling


https://www.globenewswire.com/NewsRoom/AttachmentNg/f9f0cb78-0a1b-43fe-bff1-8413c9f84be6

 

(1) All intervals are reported as drilled length not true width. The oxide mineralization is currently interpreted to be relatively flat lying and therefore, the drilled interval is estimated to be equivalent to the true width of the oxide mineralization.
(2) Core recovery varies from 20% to 100% and averaged 95% based on geotechnical logging.

 

Table 2.0 – Statistical Summary of Candelones Oxide Data Sources


https://www.globenewswire.com/NewsRoom/AttachmentNg/aed448e5-fb80-4394-9966-eff6904a747a

 

Figure 2.0 – Compilation Plan of the Candelones Connector Oxide Target


https://www.globenewswire.com/NewsRoom/AttachmentNg/d2f9a501-e9b7-41d8-99b8-eceb0bd87745

 

At the Candelones Connector, eight (8) holes were completed along section A – A’ (Ref. Figures 2.0 and 3.0), the interpreted strike of the oxide trend at the Candelones Connector. Five of the eight holes intersected mineralization associated with brecciated dacite volcanics and volcanoclastics that have been intensely oxidized. The three holes to the west (DCZ19-64, 65 and 66) intersected andesite volcanics and volcanoclastics that were not mineralized (Ref. Figure 3.0).

 

Figure 3.0 – Section A – A’ Candelones Connector – Parallel to Strike


https://www.globenewswire.com/NewsRoom/AttachmentNg/9cc0af34-2dc5-408f-8228-2728cf54acfd

 

Gold grades appear to increase to the ENE. The completed holes establish 250 meters of oxide strike length. The drilling indicates the oxide extends from surface to an average depth of 18.6 meters with an average grade of 0.82 g/t Au at a cutoff grade of 0.00 g/t Au.

 

A total of six  holes were completed along section B – B’ (Ref. Figures 2.0 and 4.0). As with the drilling along strike, the six holes all intersected mineralized dacite volcanics and / or volcanoclastics that have been intensely brecciated and oxidized. The drilling establishes a width of approximately 250 meters. Oxidation in this area extends from surface to an average depth of 18.4 meters with an average gold grade of 0.93 g/t Au at a cutoff grade of 0.00 g/t Au (Ref. Figure 4.0).

 

Figure 4.0 – Section B – B’ Candelones Main and Connector – Perpendicular to Strike


https://www.globenewswire.com/NewsRoom/AttachmentNg/94d5cd82-b201-47c4-ae6f-5c42a3a14528

 

Finally, a total of eleven holes were completed along section C – C’ (Ref. Figures 2.0 and 5.0), the interpreted strike of the oxide trend at the Candelones Main. Approximately 75% of the historical surface trenching and diamond drill results originate within the Candelones Main oxide footprint.

 

The eleven holes all intersected intensely brecciated and oxidized dacite volcanics and volcanoclastics from surface to an average depth of 25.4 meters. The holes define approximately 550 meters of strike length and return an average gold grade of 1.07 g/t Au at a cutoff grade of 0.00 g/t Au (Ref. Figure 5.0).

 

Several planned holes to test the lateral extent of the Candelones Main oxide footprint were postponed to a future date. In part this was a result of seasonal inaccessibility but primarily, the decision was driven by a desire to extend the high grade sulphide mineralization at Candelones Extension. 

 

Figure 5.0 – Section C – C’ Candelones Main – Parallel to Strike


https://www.globenewswire.com/NewsRoom/AttachmentNg/718fdb3a-3e37-481d-ae30-749e4e8eb66c

 

QA/QC

 

Oxide diamond drilling provides HQ (63.5 mm) diameter core for logging and sampling. Core is received at the on-site logging facility where it is, received, cleaned, rotated, logged for geotechnical and geological data and marked up for sampling. The core is then photographed. Normally, samples are split by wet diamond saw, and half the core is sent for assay with the remaining half stored on site. For the initial metallurgical sample program, the core is being sampled whole as there is sufficient half core in the core library for reference and the additional core from the planned infill program will be split and stored providing additional reference material. A minimum sample length of 0.3 meters and a maximum sample length of 2.0 meters is employed with most samples being approximately 1.0 meters in length except where geological contacts dictate. Certified Reference Materials are randomly inserted into the sample stream and constitute approximately 5-10% of the sample stream. Samples are shipped to a sample preparation facility in the Dominican Republic operated by Bureau Veritas. Assaying is performed at Bureau Veritas Commodities Canada Ltd.’s laboratory in Vancouver, B.C. Canada. All samples are analyzed for gold using a 50 gram lead collection fire assay fusion with an atomic adsorption finish.

 

Wes Hanson P.Geo., Chief Operating Officer of Unigold has reviewed and approved the contents of this press release.

 

About Unigold Inc. – Discovering Gold in the Caribbean

 

Unigold is a Canadian based mineral exploration company traded on the TSX Venture Exchange, focused primarily on exploring and developing its gold assets in the Dominican Republic.

 

Posted January 22, 2020

Share this news article

MORE or "UNCATEGORIZED"


VIZSLA SILVER AGREES TO ACQUIRE NEWLY CONSOLIDATED PAST-PRODUCING SILVER DISTRICT IN THE EMERGING SILVER-GOLD-RICH PANUCO - SAN DIMAS CORRIDOR IN MEXICO

Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) i... READ MORE

March 28, 2024

Additional Drill Results Highlighted by Hole D-380 in Block 6 at Oko West, Intersecting 39.7 m Grading 5.27 g/t Au Including 2.8 m @ 14.18 g/t Au and 13.0 m Grading 10.50 g/t Au

Reunion Gold Corporation (TSX-V: RGD) (OTCQX: RGDFF) is pleased t... READ MORE

March 28, 2024

STLLR Gold’s Tower Gold Project Infill Drilling Continues to Confirm Mineralization at the Jonpol Deposit

STLLR Gold Inc. (TSX: STLR) (OTCQX: STLRF) (FSE: O9D) announces ... READ MORE

March 28, 2024

Hudbay Provides Annual Reserve and Resource Update and Production Outlook

Consolidated copper production is expected to average 153,000i to... READ MORE

March 28, 2024

Aya Gold & Silver: Record 2023 Production, Revenue and Operating Cash Flow

Aya Gold & Silver Inc. (TSX: AYA) (OTCQX: AYASF) is pleased t... READ MORE

March 28, 2024

Copyright 2024 The Prospector News