The Prospector News

U.S. Gold Corp. Drills 244 m (800 ft) of Continuous Mineralization, Including 78.3 Meters (257 ft) of 5.708 g/t AuEq from Surface for its Fourth Metallurgical Hole at the CK Gold Project in Wyoming

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

U.S. Gold Corp. Drills 244 m (800 ft) of Continuous Mineralization, Including 78.3 Meters (257 ft) of 5.708 g/t AuEq from Surface for its Fourth Metallurgical Hole at the CK Gold Project in Wyoming

 

 

 

 

 

U.S. Gold Corp. (NASDAQ: USAU) a gold exploration and development company, is pleased to announce additional results of the recent twenty-nine hole drilling program for its CK Gold Project, an advanced stage gold and copper exploration and development project located just outside of Cheyenne, Wyoming.

 

George Bee, President and CEO of U.S. Gold Corp. commented, “We believe that hole CK20-04cB results returned an outstanding intercept of higher-grade gold and copper mineralization from the core of the CK Gold deposit. Perceptions in the past have been that CK Gold is just a low-grade deposit but our drilling to date verifies a higher-grade component, with attractive grades at the core of the deposit. As detailed in our previous releases, this is some of the first material that would be mined in any potential future mining operation and could lead to a quicker payback period after mine construction, should a positive PFS and FS be produced for the project. Metallurgical work is currently in progress on a composite created from holes CK20-04cA and 04cB at KCA of Reno, Nevada.”

 

CK Gold Project 2020 drilling results summary table:

 

https://www.usgoldcorp.gold/properties/ck-gold-project/2020-drilling/hole-4-ck-2020-drill-hole-intercepts-table

 

Assumptions: Grades quoted represent contained metal as assayed. The calculation of equivalent gold grade assumes the spot prices for gold, silver and copper as quoted at Kitco.com on December 10, 2020 and does not account for metallurgical recoveries. Future press releases will utilize these same metal prices for all gold-equivalent value calculations.

 

3D Visualization

 

A VRIFY 3D model of the CK Gold Project including the drill results announced today is available through the following

 

link:

 

https://vrify.com/embed/decks/2020-12-29-US-Gold-Copper-King-PR

 

CK20-04cB assay intervals:

 

www.usgoldcorp.gold/properties/ck-gold-project/2020-drilling/hole-4b-assay-intervals

 

Comments on hole CK20-04cB results:

 

  • Shows continuous, attractive gold and copper grades for the length of the hole and verifies historic drill results in the core of the deposit
  • Drilled vertical in known mineralization, parallel to strike and along steep dip in the center of a historically drill defined higher-grade zone that appears open at depth to the northwest (see VRIFY deck)
  • Terminated at planned depth in lower-grade mineralization for priority metallurgical purposes

 

 

Image 1: Native copper in core from CK20-04cA

 

Image 2: Hole CK20-04cA core is similar to the top 100 feet of CK20-04cB (shown)

 

Geologic observations:

 

Results from hole CK20-04cB continue to demonstrate the continuity of attractive gold and copper mineralization within this part of the CK Gold Project deposit. The higher-grade material starting at surface to approximately 100 feet depth is characterized by strongly foliated-gneissic granodiorite showing abundant iron oxides, native copper and green secondary copper minerals. This is followed at depth by a thin zone of mixed iron oxides, pyrite, chalcocite and chalcopyrite, and gives way at further depth to primary mineralization dominated by chalcopyrite with some bornite. Previous operators interpreted this highly sheared zone to be silicified but the Company’s work shows much of the silicification to be quartz segregations in gneissic fabric. To date, intensity of shearing seems to visually correlate with sulfide content. See the links above which provide a cross section of hole CK20-04cB and a link to U.S. Gold’s VRIFY deck which shows all holes released to date relative to historical drilling.

 

QA/QC Procedure

 

U.S. Gold Corp. employs a rigorous QA/QC protocol on all aspects of sampling and analytical procedure. Drill core is checked, logged, marked for sampling and sawn in half. One-half of each drill core is maintained for future reference and the other half of each drill core is sent to Bureau Veritas an ISO 17025 accredited laboratory in Reno, Nevada to complete all sample preparation and assaying. Samples are analyzed employing fire assaying with atomic absorption finish for gold and four acid ICP-MS analysis for silver and copper. For QA/QC purposes, certified standards, blank samples and sample duplicates are inserted into the sample stream. U.S. Gold Corp. also periodically submits sample pulps to another independent laboratory for check analysis.

 

 

COVID-19 Policy

 

U.S. Gold Corp. recognizes the heightened health risks associated with the current pandemic. At this stage of the CK Gold Project development, focusing largely on the gathering of information from the field, our personnel, contractors and consultants do not need to come into close contact with others apart from work within individual pods such as the drill crew and core logging personnel. Much of our work is conducted outdoors and physically separated. Meetings are conducted from remote locations using available video conferencing software. When it is necessary for individuals to meet or visit facilities, health guidelines are followed to avoid and minimize the risk of spreading the COVID-19 virus. We take the health and safety all those associated with our activities very seriously. If necessary, we will suspend activities and observe quarantine regimens until any health uncertainty passes.

 

Note on Qualified Person

 

QP Review: This statement has been reviewed by Kevin Francis, P Geo, SME Registered Member, Principle of Mineral Resource Management LLC who has inspected the data furnished in this announcement and has knowledge of the activities outlined in the CK Gold Project update. Acting within the scope of his expertise, Mr. Francis as a Qualified Person, has reviewed the information provided and finds it to be accurate and reflecting facts.

 

About U.S. Gold Corp.

 

U.S. Gold Corp. is a publicly traded, U.S. focused gold exploration and development company. U.S. Gold Corp. has a portfolio of exploration properties. Copper King, now the CK Gold Project, is located in Southeast Wyoming and has a Preliminary Economic Assessment (PEA) technical report, which was completed by Mine Development Associates available on the US. Gold Corp. website. Keystone and Maggie Creek are exploration properties on the Cortez and Carlin Trends in Nevada.  The Challis Gold Project is located in Idaho.

 

 

 

Posted December 29, 2020

Share this news article

MORE or "UNCATEGORIZED"


Goliath Resources Closes Upsized Brokered Private Placement for Gross Proceeds of C$9.65 Million

Goliath Resources Limited (TSX-V: GOT) (OTCQB: GOTRF) (Frankfurt:... READ MORE

May 18, 2023

Vendetta Reports High Grade Exploration Intersections in Zone 2 and 3 at the Pegmont Lead-Zinc Project, Queensland

Vendetta Mining Corp. (TSX-V: VTT) is pleased to announce the dri... READ MORE

May 18, 2023

Guanajuato Silver Drills 4.89 metres True Width of 359 g/t AgEq at San Ignacio

Results Deepen Previous Hi-Grade Drill Intercepts Guanajua... READ MORE

May 18, 2023

North Arrow Closes $2.42M Private Placement Financing and Sale of Royalty Interests in Loki Project, NWT

North Arrow Minerals Inc. (TSX-V-NAR) is pleased to announce it h... READ MORE

May 18, 2023

Luminex Hits Long High-Grade Intercept in New Breccia Pipe at Cuyes; 33 Metres of 5.4 g/t Au Eq

Cuyes West Drilling Highlights: CU23-25 – 203.0 metres grading ... READ MORE

May 18, 2023

Copyright 2023 The Prospector News