Troilus Drills 78.38 g/t AuEq Over 2 m, Including 153.73 g/t AuEq Over 1 m in the Southwest Zone

Troilus Gold Corp. (TSX: TLG) (OTCQX: CHXMF) (FSE: CM5R) is pleased to announce the final assay results from the Southwest Zone as part of its ongoing 2025 Exploration Program (see February 4, 2025 press release) at its Troilus Project located in northcentral Quebec, Canada. The now concluded Southwest drill program focused on identifying and delineating higher-grade mineralization and enhancing confidence in the block model within the Southwest Zone as outlined in the May 2024 Feasibility Study (see May 14, 2024 press release).

The Southwest drill program produced impactful results that have confirmed and extended the continuity of higher-grade material within the Phase 1 reserve pit, which encompasses years 1 to 5 of the mine plan. All intercepts reported herein lie within the current mine plan and have the potential to support optimization of the early production schedule. All grades are uncut, and true thicknesses are approximately 75% to 90% of drilled length. Please refer to the press releases from April 29, 2025 and May 22, 2025 for additional results from the 2025 Exploration Program.

Southwest Intercept Highlights (see Figure 1):

Hole SW-25-678 intersected 78.38 g/t gold equivalent (“AuEq”) (78.21 g/t Au, 5.95 g/t Ag, 0.06 % Cu) over 2 m, including 153.73 g/t AuEq (153.50 g/t Au, 11.00 g/t Ag, 0.06 % Cu) over 1 m starting at 120m downhole. This narrow yet high grade intercept represents the single best assay from the Southwest zone to date.
Hole SW-25-719 intersected 0.94 g/t AuEq (0.88 g/t Au, 0.39 g/t Ag, 0.03 % Cu) over 73 m, including 2.62 g/t AuEq (2.50 g/t Au, 0.70 g/t Ag, 0.07 % Cu) over 1 m and 15.15 g/t AuEq (15.05 g/t Au, 1.05 g/t Ag, 0.05 % Cu) over 2 m starting at 137 m downhole.
Hole SW-25-703 intersected 0.92 g/t AuEq (0.73 g/t Au, 1.55 g/t Ag, 0.10 % Cu) over 69.3 m, including 20.93 g/t AuEq (20.90 g/t Au, 0.80 g/t Ag, 0.01 % Cu) over 1 m starting at 84 m downhole.

Justin Reid, CEO of Troilus, commented, “The 2025 drill campaign delivered exactly what we set out to achieve in providing greater confidence in the block model and the discovery of additional high grade mineralization. With Phase 1 of mining focused on the Southwest Zone in years 1-5, these newly identified high-grade ounces could be particularly impactful. Our geology team continues to interpret results and is confident in the opportunity for further growth. As we advance toward a construction decision, these results help de-risk the project and reinforces its long-term value.”

*The completed NI 43-101 technical report associated with the Troilus Project FS can be found on SEDAR+ at www.sedarplus.ca under the Company’s issuer profile or on the Company’s website at www.troilusgold.com

Southwest Drilling

Drill hole SW-25-678 returned 78.41 g/t AuEq over 2 metres including 153.80 g/t over 1 metre, which is the single highest assay returned from the Southwest since the start of drilling in 2019. This intercept is hosted within a highly sheared felsic porphyry unit with a visible gold-bearing, foliation-parallel quartz-pyrite-tourmaline vein. These veins are interpreted to be the result of an overprinting orogenic gold event, that also remobilized and redistributed mineralization from earlier volcano-magmatic events. It is this overprinting relationship and long history of mineralizing events that have contributed to the scale of the Troilus resource, which stands at 11.21 Moz AuEq in Indicated category, and 1.80 Moz AuEq in the Inferred category (see October 16, 2023 press release).

Drillholes SW-24-703 and 719 returned 0.92 g/t AuEq over 69.3 m and 0.94 g/t AuEq over 73 m, respectively. Both intercepts are hosted within a distinct brecciated and magnetic volcanic unit that is the dominant host to ore in the Southwest. These results confirm strong continuity of the primary ore zones in the Southwest.

Some of the exploration drill holes from the Southwest drill program served a dual purpose as geotechnical holes, providing valuable data that will be incorporated into the updated pit designs, further de-risking the earliest years of production.

Next Steps

The exploration team is now incorporating these final drill results into the Southwest resource model and is shifting its focus to near-site and regional field targets. A soil sampling program of approximately 3,700 samples is currently underway, and results are pending from a 2,100 line-kilometre versatile time-domain electromagnetic (“VTEM”) survey completed earlier this year.

The next phase of drilling is planned for the third quarter of 2025, targeting futher high-grade extensions in the Southwest and follow-up drilling of conceptual targets that lie outside current mine plans.

Figure 1. Plan map with the reported drill hole locations relative to the Southwest reserve pit

Table 1. Southwest Drill Results

Hole	From (m)	To (m)	Interval (m)	Au Grade (g/t)	Cu Grade (%)	Ag Grade (g/t)	AuEq Grade (g/t)
SW-25-674
	9	13	4	0.29	0.02	0.20	0.33
	21.8	26	4.2	0.55	0.03	0.44	0.64
	32	43	11	0.34	0.01	0.42	0.37
	48.5	62	13.5	0.21	0.05	0.51	0.31
	65	72	7	0.26	0.06	0.21	0.37
	79	94	15	0.46	0.03	0.11	0.49
	103	116	13	0.71	0.11	0.69	0.91
incl	103	104	1	2.13	0.32	3.10	2.71
incl	111	112	1	1.95	0.33	2.30	2.53
	122	179	57	0.63	0.03	0.41	0.69
incl	145	146	1	4.82	0.00	0.00	4.83
incl	153	154	1	2.49	0.11	1.30	2.70
incl	162	163	1	2.92	0.05	3.00	3.04
	207	212	5	3.30	0.04	0.44	3.38
	218	224	6	0.24	0.07	0.24	0.36
	236	239	3	0.17	0.08	0.67	0.32
SW-25-675
	22	101	79	0.53	0.07	0.46	0.66
incl	50	51	1	18.80	0.04	2.90	18.90
	120	124	4	0.35	0.04	0.23	0.42
	131	213	82	0.44	0.03	0.36	0.46
incl	135	136	1	3.46	0.64	7.00	4.62
and	196.9	197.5	0.6	9.50	0.01	0.50	9.52
	230	246	16	0.21	0.07	0.51	0.33
	250	267	17	0.22	0.07	0.73	0.35
SW-25-676
	15	25	10	0.26	0.03	0.45	0.33
	50	65	15	0.27	0.05	0.63	0.36
	79	80	1	2.08	0.10	1.20	2.27
	84	86	2	0.75	0.16	1.45	1.04
	117	161	44	0.36	0.02	0.29	0.40
	204	206.3	2.3	0.80	0.00	0.25	0.81
	212	215.5	3.5	0.17	0.09	1.14	0.33
	244.7	249	4.3	0.79	0.09	1.13	0.96
SW-25-678
	12	14	2	0.76	0.04	0.45	0.84
	28	32	4	0.42	0.01	0.13	0.54
	38	42	4	0.35	0.00	0.15	0.36
	48	60	12	0.32	0.00	0.00	0.33
	80	83	3	0.20	0.12	1.87	0.42
	90	91	1	4.49	0.09	1.30	4.67
	120	122	2	78.21	0.06	5.95	78.38
incl	120	121	1	2.91	0.07	0.90	3.03
and	121	122	1	153.50	0.06	11.00	153.73
	153	158	5	0.14	0.13	1.68	0.38
SW-25-685
	76	99	23	0.22	0.08	1.36	0.37
SW-25-687
	7.5	20.5	13	0.50	0.04	0.53	0.58
incl	7.5	8.5	1	1.79	0.17	2.10	2.09
	52.5	69.5	17	0.21	0.05	0.77	0.31
	88.5	103.5	15	1.27	0.15	2.10	1.55
incl	99.5	100.5	1	14.70	0.36	10.60	15.44
	109.5	121.5	12	0.18	0.08	0.71	0.31
SW-25-692
	26	28	2	0.49	0.00	0.00	0.50
	41	63	22	0.38	0.01	0.70	0.41
	69	80	11	2.49	0.00	0.05	2.50
incl	75	76	1	23.20	0.00	0.60	23.21
	99	107	8	0.49	0.03	0.66	0.54
	134	150	16	0.52	0.11	0.67	0.71
SW-25-693
	77	84	7	0.28	0.01	0.19	0.31
	99	103	4	0.25	0.05	0.48	0.35
	170	171	1	1.99	0.10	2.60	2.18
	184	189	5	0.31	0.01	0.44	0.34
	195	197	2	2.74	0.24	4.95	3.21
	244	246	2	3.02	0.01	0.00	3.04
SW-25-694
	20	23	3	0.31	0.05	0.63	0.40
SW-25-696
	11	14	3	0.28	0.01	0.33	0.31
	23	43	20	0.27	0.05	0.49	0.36
	54	55	1	1.23	0.12	1.00	1.45
	65	68	3	0.23	0.09	0.77	0.38
	83	96	13	0.26	0.07	0.70	0.39
	113	123	10	0.27	0.14	2.06	0.52
SW-25-698
	42	44	2	0.58	0.01	0.00	0.60
	55	63	8	0.45	0.05	0.39	0.54
	69	73	4	0.33	0.06	0.13	0.45
	84	87	3	0.35	0.01	0.23	0.38
	95	96	1	0.78	0.19	10.70	1.22
	113.6	120	6.4	0.22	0.09	0.95	0.38
	171	192	21	0.23	0.06	0.96	0.34
SW-25-700
	24	28	4	0.33	0.02	0.00	0.38
	63	64	1	1.14	0.02	0.80	1.19
	123.3	157	33.8	0.50	0.08	0.58	0.63
	168.7	187	18.3	0.20	0.09	0.24	0.33
	201	222.55	21.55	0.35	0.12	1.51	0.58
incl	211	212	1	2.69	0.28	4.40	3.21
	232	243	11	0.22	0.10	1.90	0.40
SW-25-703
	17	24	7	0.45	0.08	1.46	0.60
incl	17	18	1	2.43	0.35	9.10	3.13
	30	34	4	0.32	0.01	0.13	0.34
	77	81	4	0.36	0.01	0.00	0.39
	84	153.3	69.3	0.73	0.10	1.55	0.92
incl	93	94	1	3.35	0.22	1.20	3.73
and	111	112	1	20.90	0.01	0.80	20.93
	159	208	49	0.33	0.01	0.09	0.35
	215.3	218	2.8	0.37	0.03	0.27	0.39
	221	226	5	0.51	0.05	0.88	0.59
SW-25-704
	12	24	12	0.52	0.07	0.37	0.64
	31	36	5	0.95	0.04	0.12	1.02
incl	34	35	1	2.50	0.02	0.00	2.54
	82	158	76	0.56	0.04	0.57	0.65
incl	121	122	1	2.59	0.02	0.50	2.64
and	132	133	1	2.44	0.05	0.70	2.53
and	141	147	6	2.38	0.16	2.59	2.67
and	145	146	1	5.91	0.34	5.70	6.55
	170	178	8	0.20	0.09	0.88	0.36
	202.1	204	1.9	0.51	0.28	3.25	1.00
SW-25-705
	7	16	9	0.54	0.01	0.06	0.57
	23	25	2	0.51	0.01	0.00	0.54
	47	54	7	0.96	0.02	0.73	1.01
	71	72	1	1.17	0.00	0.60	1.18
	202	204	2	5.78	0.03	1.30	5.84
incl	202	203	1	11.05	0.05	2.60	11.16
SW-25-711
	49	52	3	0.32	0.04	0.57	0.39
	59	61	2	1.54	0.23	6.65	2.00
	103	104	1	1.21	0.00	0.00	1.22
	113	130	17	0.58	0.01	0.19	0.60
incl	126	127	1	3.22	0.00	0.00	3.23
	167	169	2	0.54	0.00	0.00	0.55
SW-25-714
	12	21	9	0.73	0.01	0.00	0.74
incl	18	19	1	5.14	0.00	0.00	5.15
	39	43	4	0.31	0.01	14.63	0.51
	51	53	2	2.23	0.03	0.00	2.28
	66	67	1	3.45	0.26	5.40	3.95
	76	88	12	0.28	0.04	0.26	0.35
	131	134	3	0.23	0.07	1.00	0.36
	169	172	3	0.17	0.11	2.00	0.37
SW-25-718
	10	37	27	0.40	0.06	0.72	0.51
	46	56	10	0.71	0.03	0.34	0.76
	62	74	12	0.34	0.02	0.09	0.37
	95	113	18	0.18	0.07	0.46	0.30
	125	129	4	0.21	0.06	0.30	0.31
	168	173	5	0.43	0.01	0.10	0.46
	179	180	1	2.19	0.00	0.00	2.20
SW-25-719
	20	67	47	0.70	0.04	0.23	0.77
incl	59	65	6	2.64	0.03	0.10	2.69
	73	75	2	0.57	0.17	1.45	0.87
	92	109	17	0.41	0.05	0.12	0.50
	126	128	2	0.60	0.29	1.80	1.12
	137	210	73	0.88	0.03	0.39	0.94
incl	183	184	1	2.50	0.07	0.70	2.62
and	196	198	2	15.05	0.05	1.05	15.15
	224	225.3	1.3	2.14	0.00	0.00	2.15
	231	239	8	0.19	0.10	0.80	0.38
SW-25-720
	31.1	113	81.9	0.33	0.06	0.39	0.45
	119	122	3	0.25	0.06	0.00	0.36
	136	138	2	0.86	0.00	0.00	0.87
	151	153	2	1.22	0.01	0.00	1.24
	170	197	27	0.40	0.06	0.71	0.52
incl	180	181	1	3.34	0.21	3.10	3.74
	205	244	39	0.51	0.04	0.45	0.60
incl	219	220	1	9.89	0.02	1.10	9.93
SW-25-721
	8	19	11	0.51	0.04	0.67	0.59
	26	44	18	0.37	0.03	0.22	0.42
incl	30	31	1	2.50	0.01	0.00	2.52
	58	67	9	0.41	0.16	1.03	0.69
	73	78	5	0.23	0.07	0.40	0.35
	172	173	1	1.04	0.01	0.00	1.06
SW-25-724
	6	14	8	0.27	0.02	0.31	0.32
	26	33	7	0.66	0.15	2.66	0.95
incl	29	30	1	2.33	0.64	13.00	3.56
	57	64	7	0.22	0.05	0.67	0.32
GT-SW-25-725
	8.8	31	22.3	0.38	0.13	0.53	0.60
	91	92	1	0.66	0.02	14.20	0.87
	113	114	1	1.37	0.16	0.90	1.64
	143	151	8	1.18	0.06	1.69	1.30
incl	147	148	1	5.75	0.00	0.60	5.76
	171	194	23	0.50	0.15	1.19	0.77
incl	172	173	1	2.35	0.20	6.50	2.76
and	183	189	6	0.80	0.32	1.80	1.35
	204	205	1	1.35	0.01	0.25	1.36
	224	252	28	0.57	0.09	0.54	0.74
incl	225	237	12	0.93	0.14	0.73	1.18
GT-SW-25-726
	106	107	1	2.93	0.01	14.70	3.12
	127	138	11	0.35	0.01	0.05	0.38
	149	153	4	0.49	0.03	0.00	0.54
	158.6	179	20.4	0.35	0.05	0.33	0.44
	186	190	4	0.34	0.02	0.00	0.38
	199	200	1	12.80	0.01	0.60	12.82
	206	212	6	0.32	0.05	0.28	0.40
	221	238	17	0.79	0.10	0.42	0.98
incl	232	233	1	7.82	0.15	0.90	8.09
	276	281	5	0.57	0.01	0.00	0.55
	290	300.1	10.1	1.63	0.01	0.00	1.65
incl	292	293	1	3.49	0.03	0.00	3.54
and	298	299	1	7.93	0.01	0.00	7.95

* AuEq = Au + 1.6823 x Cu + 0.0124 x Ag

Quality Assurance and Control

During the drill program, one meter assay samples were taken from NQ core and sawed in half. One-half was sent for assaying at ALS Laboratory, a certified commercial laboratory, and the other half was retained for results, cross checks, and future reference. A strict QA/QC program was applied to all samples; which included insertion of one certified mineralized standard and one blank sample in each batch of 25 samples. Every sample was processed with standard crushing to 85% passing 75 microns on 500 g splits. Samples were assayed by one-AT (30 g) fire assay with an AA finish and if results were higher than 3.5 g/t Au, assays were redone with a gravimetric finish. For QA/QC samples, a 50 g fire assay was done. In addition to gold, ALS laboratory carried out multi-element analysis for ME-ICP61 analysis of 33 elements four acid ICP-AES.

Qualified Person

The technical and scientific information in this press release has been reviewed and approved by Nicolas Guest, P.Geo., Exploration Manager, who is a Qualified Person as defined by NI 43-101. Mr. Guest is an employee of Troilus and is not independent of the Company under NI 43-101.

AuEq Disclosure

The formulas used to calculate equivalent values for resources are as follows, for 87 Pit AuEq = Au + 1.5628*Cu +0.0128 *Ag, for J Pit AuEq = Au + 1.5107*Cu +0.0119 *Ag, for SW Pit AuEq = Au + 1.6823*Cu +0.0124 *Ag, for X22 Pit AuEq = Au + 1.5628*Cu +0.0128 *Ag. AuEq was calculated using metal prices of $1,850/oz Au; $4.25/lb Cu and $23.00/oz Ag.

About Troilus Gold Corp.

Troilus Gold Corp. is a Canadian development-stage mining company focused on the systematic advancement of the former gold and copper Troilus Mine towards production. Troilus is located in the tier-one mining jurisdiction of Quebec, Canada, where it holds a large land position of 435 km² in the Frôtet-Evans Greenstone Belt. A Feasibility Study completed in May 2024 supports a large-scale 22-year, 50ktpd open-pit mining operation, positioning it as a cornerstone project in North America.

Posted June 17, 2025

Return to Home page

MORE or "UNCATEGORIZED"

Bonterra Announces Closing of Upsized Brokered Private Placement for Proceeds of $10.5M

Bonterra Resources Inc. (TSX-V: BTR) (OTCQX: BONXF) (FSE: 9BR2) i... READ MORE

June 30, 2025

ESGold Expands Montauban Mine Building to 4,000 sq. ft. Ahead of Key Operational Milestones

Increased facility footprint reflects advanced construction progr... READ MORE

June 30, 2025

ARIS MINING COMPLETES INSTALLATION AND COMMISSIONING OF SECOND MILL AT SEGOVIA, ON TIME AND ON BUDGET

Aris Mining Corporation (TSX: ARIS) (NYSE-A: ARMN) announces the... READ MORE

June 30, 2025

Zodiac Gold Expands Arthington Discovery with Broad Gold Intercepts

Zodiac Gold Inc. (TSXV: ZAU) a West-African gold exploration co... READ MORE

June 30, 2025

Appia Announces Final Closing of Its Non-Brokered Private Placement

Appia Rare Earths & Uranium Corp. (CSE: API) (OTCQB: APAAF) (... READ MORE

June 30, 2025

The Prospector News