The Prospector News

Troilus Drills 6.66 g/t AuEq Over 3m, 1.20 g/t AuEq Over 16m and 1.13 g/t Over 21m, Confirming Down Dip Extension of Mineralization Over 100 Metres Below Pea Pit in Southwest Zone

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Troilus Drills 6.66 g/t AuEq Over 3m, 1.20 g/t AuEq Over 16m and 1.13 g/t Over 21m, Confirming Down Dip Extension of Mineralization Over 100 Metres Below Pea Pit in Southwest Zone

 

 

 

 

 

Troilus Gold Corp. (TSX: TLG) (OTCQB: CHXMF) reports new assay results from the Fall/Winter 2020 drill program at its 100%-owned Troilus Gold Project located in north central Quebec, Canada. The following drill holes were received from the Southwest Zone, a priority growth target which was discovered and drilled in late 2019 and early 2020 (See Figure 1). These results have identified previously unidentified extensions of mineralization at depth, and confirmed continuity of mineralization within previously undrilled areas of the pit proposed in the Preliminary Economic Assessment (“PEA”) (See press release dated August 31, 2020).

 

Highlights include:

 

New higher-grade zones extend known mineralization at least 100 metres below the PEA pit in hole TLG-ZSW20-203 (see Figure 2):
    1.20 g/t AuEq over 16m
    6.66 g/t AuEq over 3m, including 17.92 g/t AuEq over 1m
    1.13 g/t AuEq over 2m, including 2.61 g/t AuEq over 1m, 2.10 g/t AuEq over 1m and 11.76 g/t AuEq over 1m
New high-grade zone outlined within 50 metres of surface within the PEA pit in step-out hole TLG-ZSW20-200 (see Figure 3):
    1.44 g/t AuEq over 6m and 3.35 g/t AuEq over 1m within a broader intersection of 1.07 g/t AuEq over 9m
Several high-grade intersections within broader intervals, located over 100 metres below the pit wall proposed in the PEA in hole TLG-ZSW20-200, including:
    20.42 g/t AuEq over 1m, 2.05 g/t AuEq over 1m, and 2.98 g/t AuEq over 3m, incl. 8.30 g/t AuEq over 1m

 

“We are very pleased with the latest results from the Southwest Zone, which confirmed some targeted down dip extensions and also identified new zones of mineralization outside of the current mineral resource envelope and within the PEA pit,” said Justin Reid, Chief Executive Officer of Troilus. “Furthermore, we continue to encounter higher-grade domains within broader disseminated mineralized zones consistent with the largest ore body at Troilus, Zone Z87, located 2.5 kilometres to the northeast. As we define the scale and extent of the Southwest Zone, we are observing a continuity of mineralization from previously undrilled zones within the PEA pit, and continued expansion well beyond it, which could not only enhance the economics of the project by reducing the strip ratio but also provide an opportunity to increase the production profile in the Pre-Feasibility Study planned later this year. The Southwest Zone remains entirely open to further expansion and will continue to be a priority drill target in 2021.”

 

This Southwest Zone is located approximately 2.5 kilometres southwest of the former mine site and main mineral resource area (See Figure 1). It was initially discovered and drilled in late 2019 and early 2020 following some new geologic modelling work by Troilus’ technical team. A minimal 8,500 metres of drilling in this zone has already outlined an estimated Inferred resource of 580,000 oz of gold equivalent ounces (22.6 Mt, at avg. grade of 0.80 g/t AuEq).

 

Figure 1: Location of New Drill Hole Results in the Southwest Zone


https://www.globenewswire.com/NewsRoom/AttachmentNg/6c2335f2-98b5-47bd-b600-3219e188b5de

 

Figure 2: Section N9525; View of drill hole TLG-ZSW20-203


https://www.globenewswire.com/NewsRoom/AttachmentNg/a5e06285-7c18-48d6-8ef3-e91e28789737

 

Figure 3: Section N9350; View of drill hole TLG-ZSW20-200


https://www.globenewswire.com/NewsRoom/AttachmentNg/fea4f46a-6119-4707-8154-4b2d46409c4f

 

 

Table 1: New Southwest Zone Drill Results Highlights

 

Hole From
(m)
To
(m)
Interval
(m)
Au Grade
(g/t)
Cu Grade
(%)
Ag Grade
(g/t)
AuEq Grade
(g/t)
TLG-ZSW20-200
  33 42 9 1.05 0.006 1.04 1.07
incl. 33 39 6 1.41 0.008 1.31 1.44
incl. 36 37 1 3.30 0.012 3.10 3.35
  50 59 9 0.80 0.001 0.53 0.80
incl. 53 54 1 2.22 0.001 0.90 2.23
  335 336 1 0.98 0.240 1.70 1.31
  410 411 1 20.40 0.002 1.20 20.42
  431 432 1 1.99 0.053 0.25 2.05
  457 460 3 2.91 0.038 2.07 2.98
incl. 459 460 1 8.16 0.067 5.10 8.30
TLG-ZSW20-202
  116 118 2 0.72 1.190 0.85 1.19
  298 313 15 0.68 0.124 0.62 0.85
incl. 299 303 4 1.06 0.166 0.83 1.29
incl. 307 310 3 0.86 0.142 0.85 1.05
  321 326 5 0.74 0.107 0.88 0.89
incl. 325.1 326 0.9 2.87 0.105 3.40 3.04
  546 551 5 1.12 0.038 0.85 1.18
incl. 546 547 1 4.30 0.085 1.70 4.43
  619 621 2 0.28 0.041 83.35 1.22
incl. 620 621 1 0.44 0.046 149.00 2.08
TLG-ZSW20-203
  74 74.82 0.82 2.86 0.048 4.20 2.97
  237 239 2 1.33 0.026 1.35 1.38
  278 286 8 0.67 0.111 3.91 0.85
incl. 279 280 1 2.49 0.487 22.50 3.35
  360 361.7 1.7 2.10 0.123 4.20 2.30
  439 442 3 6.54 0.077 2.13 6.66
incl. 439 440 1 17.80 0.078 1.60 17.92
  451 478 27 0.72 0.054 2.91 0.82
incl. 462 478 16 1.06 0.073 4.42 1.20
incl. 462 470 8 1.73 0.096 4.49 1.90
  485 506 21 1.04 0.041 3.38 1.13
incl. 488 489 1 2.52 0.064 0.80 2.61
incl. 497 498 1 2.08 0.011 0.60 2.10
incl. 504 505 1 11.15 0.117 43.40 11.76

 

*Note drill intervals reported in this news release are down-hole core lengths as true thicknesses cannot be determined with available information.

Quality Assurance and Control

 

During the Southwest Zone drill program in 2020, one metre assay samples were taken from NQ core and sawed in half. One-half was sent for assaying at ALS Laboratory, a certified commercial laboratory, and the other half was retained for results, cross checks, and future reference. A strict QA/QC program was applied to all samples; which included insertion of one certified mineralized standard and one blank sample in each batch of 25 samples. Every sample was processed with standard crushing to 85% passing 75 microns on 500 g splits. Samples were assayed by one-AT (30 g) fire assay with an AA finish and if results were higher than 3.5 g/t Au, assays were redone with a gravimetric finish. For QA/QC samples, a 50 g fire assay was done. In addition to gold, ALS laboratory carried out multi-element analysis for ME-ICP61 analysis of 33 elements four acid ICP-AES.

 

Qualified Person

The technical and scientific information in this press release has been reviewed and approved by Bertrand Brassard, M.Sc., P.Geo., Chief Geologist, who is a Qualified Person as defined by NI 43-101. Mr. Brassard is an employee of Troilus and is not independent of the Company under NI 43-101.

 

About Troilus Gold Corp.

 

Troilus is a Toronto-based, Quebec focused, advanced stage exploration and early-development company focused on the mineral expansion and potential mine re-start of the former gold and copper Troilus mine. The 107,326 hectare Troilus property is located northeast of Chibougamau, within the Frotêt-Evans Greenstone Belt in Quebec, Canada. From 1996 to 2010, Inmet Mining Corporation operated the Troilus project as an open pit mine, producing more than 2,000,000 ounces of gold and nearly 70,000 tonnes of copper.

 

Posted February 9, 2021

Share this news article

MORE or "UNCATEGORIZED"


Elevation Gold Reports Financial Results for Year Ended December 31, 2023, including $66.4M in Total Revenue

Elevation Gold Mining Corporation (TSX-V: ELVT) (OTCQB: EVGDF) i... READ MORE

April 18, 2024

Reunion Gold Announces the Signing of a Mineral Agreement With the Government of Guyana for Its Oko West Project

Reunion Gold Corporation (TSX-V: RGD; OTCQX: RGDFF) is pleased to announ... READ MORE

April 18, 2024

Drilling Confirms 4 km of Favourable Corridor at Lynx Gold Trend

Puma Exploration Inc. (TSX-V: PUMA) (OTCQB: PUMXF) is thrilled to... READ MORE

April 18, 2024

Grid Metals Intersects 7 m at 1.28% Li2O at over 125 m Below the Previously Deepest Drill Holes at Donner Lake; Provides Project Update

Grid Metals Corp. (TSX-V:GRDM) (OTCQB:MSMGF) is pleased to announ... READ MORE

April 18, 2024

Azimut and SOQUEM Cut Thick Spodumene Pegmatites at Galinée, James Bay Region, Quebec

Azimut Exploration Inc. (TSX-V: AZM) (OTCQX: AZMTF) is pleased ... READ MORE

April 18, 2024

Copyright 2024 The Prospector News