Uncategorized
SilverCrest Reports Additional La Joya High Grade Intercepts 80m of 78.8 gpt Ag, 0.31 gpt Au, 0.5% Cu (137 gpt Ag Eq(i))
SilverCrest Mines Inc. (TSX VENTURE:SVL)(NYSE MKT:SVLC)(NYSE Amex:SVLC) announce the results of an additional 15 holes (LJ DD12-90 to LJ DD12-104) of the Phase II drill program at its La Joya Property in Durango, Mexico. These are the final results for the Phase II drilling program. Phase II drilling results reported to date have extended the Main Mineralized Trend (“Trend”) beyond the area containing the current Inferred Resource of 101.9 million ounces Ag Eq.(i) (see News releases dated March 20 and May 7, 2012 and attached Figures: http://media3.marketwire.com/docs/svl1221_F1-2.pdf). Drilling and surface sampling has extended the Trend to approximately 2.5 kilometres with an average width of approximately 700 metres. Please reference our website at www.silvercrestmines.com for more information, photos and figures on La Joya.
Eight of the 15 holes reported in the tables and text below continued to test the southern extension of the Trend with the remaining 7 holes focused on the delineation of the Coloradito and Santo Nino Targets (Targets). Silver values in this series of core holes along the Trend and Targets range from 1.9 gpt to 176.0 gpt. Silver equivalent based values range from 14.1 gpt to 411.5 gpt Ag Eq.(i) (0.41 oz/ton to 12.0 oz/ton Ag Eq.). Mineralized intervals range from 7.1 metres to 251.0 metres. True thicknesses of mineralized intercepts can be approximated from cross sections of previously announced drill holes in the respective areas. Intercepts in holes drilled at a 45 degrees angle are at vertical depths considerably less than implied by the core length measurements making many of the intercepts near to surface. Intercepts in holes L J12- 92, 95, 98, 100, and 103, presented below, are examples of near surface, higher grade mineralization that will be considered as part of a potential starter pit. The most significant assay results for this series of holes are shown in the following tables:
Main Mineralized Trend (Ag, Au, Cu)
----------------------------------------------------------------------------
Hole ID From To Interval Ag Au Ag Eq(i)
(Az, Dip) (m) (m) (m) gpt gpt Cu % gpt
----------------------------------------------------------------------------
L J DD12 - 92
(180,-45) 111.0 126.8 15.8 11.9 0.50 0.89 114.0
----------------------------------------------------------------------------
150.5 161.5 11.0 23.8 0.32 0.92 119.4
----------------------------------------------------------------------------
198.0 208.0 10.0 6.9 0.54 0.08 41.5
----------------------------------------------------------------------------
312.0 402.0 90.0 6.6 0.30 0.20 38.3
----------------------------------------------------------------------------
L J DD12 - 95
(0, -45) 44.0 76.0 32.0 29.4 0.08 0.22 52.0
----------------------------------------------------------------------------
174.4 206.8 32.4 17.5 0.12 0.07 29.2
----------------------------------------------------------------------------
273.0 286.5 13.5 75.9 0.16 0.47 124.1
----------------------------------------------------------------------------
318.5 338.0 19.5 7.1 0.37 0.07 31.7
----------------------------------------------------------------------------
406.6 429.4 22.8 20.3 0.19 0.09 38.0
----------------------------------------------------------------------------
L J DD12 - 98
(0, -45) 60.0 93.5 33.5 51.7 0.83 0.34 122.8
----------------------------------------------------------------------------
125.5 135.5 10.0 25.2 0.13 0.03 34.2
----------------------------------------------------------------------------
L J DD12 - 100
(0, -45) 78.6 124.0 45.4 16.2 0.44 0.04 41.9
----------------------------------------------------------------------------
168.0 248.0 80.0 78.8 0.31 0.50 137.2
----------------------------------------------------------------------------
includes 175.4 206.7 31.3 176.0 0.06 1.10 273.9
----------------------------------------------------------------------------
299.5 308.0 8.5 16.4 0.40 0.11 45.8
----------------------------------------------------------------------------
400.0 425.5 25.5 22.0 0.04 0.14 35.8
----------------------------------------------------------------------------
L J DD12 - 101
(180, -45) 18.0 64.0 46.0 10.9 0.22 0.07 28.1
----------------------------------------------------------------------------
161.0 211.0 50.0 6.1 0.46 0.10 37.5
----------------------------------------------------------------------------
239.0 256.0 17.0 12.8 0.13 0.14 31.6
----------------------------------------------------------------------------
L J DD12 - 102
(0, -45) 20.0 27.6 7.6 16.4 0.11 0.15 35.0
----------------------------------------------------------------------------
228.5 250.0 21.5 20.5 0.19 0.14 42.6
----------------------------------------------------------------------------
342.0 354.0 12.0 44.2 0.83 0.29 110.6
----------------------------------------------------------------------------
380.0 394.0 14.0 11.8 0.54 0.17 53.4
----------------------------------------------------------------------------
463 475.8 12.8 16.3 0.14 0.14 35.5
----------------------------------------------------------------------------
542.9 550.0 7.1 85.4 0.19 0.19 111.6
----------------------------------------------------------------------------
L J DD12 -103
(0,-45) 32.0 70.0 38.0 9.6 2.88 0.06 158.3
----------------------------------------------------------------------------
includes 47.7 58.0 10.3 7.8 8.51 0.01 433.9
----------------------------------------------------------------------------
134.0 288.3 154.3 28.1 0.19 0.22 56.8
----------------------------------------------------------------------------
includes 269.0 288.3 19.3 118.3 0.45 0.98 224.6
----------------------------------------------------------------------------
L J DD12 -104
(0,-45) 61.5 145.0 83.5 21.0 0.26 0.12 44.74
----------------------------------------------------------------------------
includes 69.3 79.8 10.5 59.7 0.06 0.51 107.2
----------------------------------------------------------------------------
200.2 229.2 29.0 26.5 0.03 0.15 40.5
----------------------------------------------------------------------------
302.5 395.0 91.0 22.7 0.10 0.14 40.2
----------------------------------------------------------------------------
includes 307.8 322.0 14.2 49.1 0.27 0.53 108.3
----------------------------------------------------------------------------
(i) Silver equivalency includes silver, gold and copper and excludes lead,
zinc, molybdenum, tin and tungsten values. Ag:Au is 50:1, Ag:Cu is 86:1,
based on 5 year historic metal price trends of US$24/oz silver, US$1200/oz
gold, US$3/lb copper. 100% metallurgical recovery is assumed. All numbers
are rounded. Silver Equivalent grades may be converted to ounces per ton by
dividing the Ag Eq values by 34.285.
All sample analyses presented in this news release were completed by ALS Chemex in Zacatecas, Mexico and North Vancouver, BC, Canada. Holes L J DD12-90, 93, and 99 showed no significant mineralization.
Coloradito Target (W, Mo, Cu, Au, Ag)
Four additional holes were drilled on the near-surface portion of the Coloradito Target which is located approximately one kilometre west of the Trend. The Coloradito Target mineralization consists of skarning with stockwork veining and occurs adjacent to intrusive stock and dykes which are exposed at surface. Holes intercepting the Coloradito Target also contain anomalous Pb (lead), Zn (zinc), and Sn (tin).
Partial drilling of the Coloradito Target shows consistent intercepts of wide-spread tungsten (W03), molybdenum (Mo), gold (Au), and silver (Ag) mineralization from near surface to depths up to approximately 250 metres vertically. Drilling to date has identified an area of approximately 600 metre long, 200 metres wide and at least 250 metres deep starting at surface. A detail model of the Coloradito Target is being developed from drill data to provide a guide for further definition of this target which is considered a “potential large bulk tonnage tungsten-molybdenum target” and will be segregated as part of the next resource estimation. The summary of the resource revision is expected to be announced in the next several weeks with the subsequent NI 43-101 Technical Report to follow within 45 days.
Coloradito and Santo Nino Targets (W, Mo, Cu, Au, Ag)
----------------------------------------------------------------------------
Ag
Hole ID From To Interval Ag Au Eq (i)
(Az, Dip) (m) (m) (m) gpt gpt Cu % Mo % WO3 % gpt
----------------------------------------------------------------------------
Coloradito
----------------------------------------------------------------------------
L J DD12 -
91 (0,
-50) 9.6 198.0 188.4 7.9 0.08 0.02 0.042 0.074 13.7
----------------------------------------------------------------------------
includes 71.0 97.0 26.0 17.0 0.22 0.02 0.080 0.105 30.1
----------------------------------------------------------------------------
L J DD12 -
94 (0,-
50) 0.0 251.0 251.0 6.1 0.08 0.04 0.013 0.064 13.8
----------------------------------------------------------------------------
includes 168.0 251.0 83.0 10.9 0.10 0.02 0.017 0.101 17.1
----------------------------------------------------------------------------
L J DD12 -
96 (45,-
50) 60.0 111.0 51.0 1.9 0.24 0.02 0.002 0.013 15.5
----------------------------------------------------------------------------
Santo Nino
----------------------------------------------------------------------------
L J DD12 -
97 (315,
-45) 53.5 98.0 44.5 15.0 0.04 0.08 0.016 0.044 23.4
----------------------------------------------------------------------------
157.0 184.2 27.2 5.9 0.04 0.48 0.002 0.066 48.9
----------------------------------------------------------------------------
(i) Silver equivalency includes silver, gold and copper and excludes lead,
zinc, molybdenum, tin and tungsten values. Ag:Au is 50:1, Ag:Cu is 86:1,
based on 5 year historic metal price trends of US$24/oz silver, US$1200/oz
gold, US$3/lb copper. 100% metallurgical recovery is assumed. All numbers
are rounded.
All sample analyses were completed by ALS Chemex in Zacatecas, Mexico and
North Vancouver, BC, Canada.
Santo Nino Target (W, Mo, Cu, Au, Ag)
Holes L J DD12-97 and 99 were drilled to further test the Santo Nino Target approximately 1 kilometre east of the Trend’s eastern boundary. Hole 97 intercepted 27.2 metres of semi-massive sulphides grading 5.9 gpt Ag, 0.07 gpt Au, 0.48% Cu and 0.066% WO3. This hole encountered an extension of the massive sulphide mineralization (Santo Nino) reported in the discovery Hole L J DD12-74 which intercepted 35.2 metres grading 52.2 gpt Ag, 0.05 gpt Au, 1.6% Cu and 0.037% WO3. The mineralization is believed to be associated with a substantial east-west structure that cross cuts the width of the Trend mineralization to the west. Holes L J DD12-99 was located near the Santo Nino target but was off the target and intercepted no significant values.
The Phase II drill program was designed to test approximately 2.5 kilometres of the Trend which includes at least 8 near-vertical structures/stockwork zones, 14 near-horizontal, stacked mantos plus the Contact Zone which is adjacent to the underlying intrusive. Drilling on the southern extension of the Trend and Contact Zone has been completed and two of the three core drill rigs have been released. A reverse circulation drill is expected to commence drilling on exploratory targets in the area in January 2013. Based on Company surface mapping, sampling and historic drill hole results, the southern area is still believed to be potentially the highest grade area along the Trend. The Company is currently examining the potential for a potential near-surface, higher grade, low strip open pit as a conceptual “starter pit” that will be evaluated in a Preliminary Economic Assessment in 2013.
Phase III drill program has begun with core samples for holes L J DD12-105 to L J DD12-107 currently being logged, sampled or are in the laboratory for analyzes. This program has approximately 30 core holes and will include the 20 RVC holes uncompleted in Phase II. The next phase, planned for the first half of 2013, will further expand resources, in-fill higher grade defined areas, and test geophysical anomalies within the Company’s concessions. Several holes contain anomalous molybdenum, tungsten, tin, lead and zinc values over significant widths in the skarn. Extensive metallurgical test work is underway to examine the amenability and potential metallurgical recoveries of Ag, Au, Cu, W, Mo, Sn, Zn and Pb. Metallurgical test work results will be presented in the NI 43-101 Technical Report in early 2013.
The La Joya Deposit (Main Mineralized Trend) currently has estimated Inferred Resources of:
----------------------------------------------------------------------------
CUT OFF
GRADE
(AG EQ. TONNES AG AU
CATEGORY (ii) (i) GPT) (000's) GPT GPT CU %
----------------------------------------------------------------------------
INFERRED (iii) 15 57,940 28.0 0.18 0.21
------------------------------------------------------------
30 35,500 39.0 0.22 0.30
----------------------------------------------------------------------------
----------------------------------------------------------------------------
CONTAINED
CONTAINED CONTAINED CONTAINED AG EQ.
AG OZ AU OZ CU LBS OZ(i)
CATEGORY (ii) (000's) (000's) (000's) (000's)
----------------------------------------------------------------------------
INFERRED (iii) 51,348 333.4 270,296 101,918
------------------------------------------------------------
44,300 246.0 237,500 86,400
(i) Silver equivalency includes silver, gold and copper and excludes lead,
zinc, molybdenum and tungsten values. Ag:Au is 50:1, Ag:Cu is 86:1, based
on 5 year historic metal price trends of US$24/oz silver, US$1200/oz gold,
US$3/lb copper. 100% metallurgical recovery is assumed.
(ii) Classified by EBA, A Tetra Tech Company and conforms to NI 43-101, 43-
101CP, and CIM definitions for resources. All numbers are rounded. Inferred
Resources have been estimated from geological evidence and limited sampling
and must be treated with a lower level of confidence than Measured and
Indicated Resources.
(iii) Mineralization boundaries used in the interpretation of the geological
model and resource estimates are based on cutoff grades of 15 gpt Ag Eq and
30 gpt Ag Eq using the metal price ratios described above.
Please refer to the January 4, 2012 news release and to the La Joya NI 43-101 Technical Report dated February 20, 2012 for further details of the Inferred Resource estimate.
The target size of the La Joya mineralization and the potential subsequent estimated resources based on the current geologic model, drilling and sampling from the Phase II 2012 program suggests the possibility of target resources that may be 50 to 100% greater than the current resources. This potential increase in quantity of resources is conceptual in nature and insufficient exploration has been completed to define with certainty a mineral resource of this size. It is uncertain that further exploration will result in the target being delineated as a mineral resource.
The Qualified Person under National Instrument (NI 43-101) Standards of Disclosure for Mineral Projects for this News Release is N. Eric Fier, CPG, P.Eng, and Chief Operating Officer for SilverCrest Mines Inc., who has reviewed and approved its contents.
SilverCrest Mines Inc. (TSX VENTURE:SVL)(NYSE MKT:SVLC)(NYSE Amex:SVLC) is a Canadian precious metals producer headquartered in Vancouver, BC. SilverCrest’s flagship property is the 100%-owned Santa Elena Mine, located 150 km northeast of Hermosillo, near Banamichi in the State of Sonora, Mexico. The mine is a high-grade, epithermal gold and silver producer, with an estimated life of mine cash cost of US$8 per ounce of silver equivalent (55:1 Ag:Au). SilverCrest anticipates that the 2,500 tonnes per day facility should recover approximately 4,805,000 ounces of silver and 179,000 ounces of gold over the life of the current open pit at the Santa Elena Mine. A three year expansion plan is underway to double metals production at the Santa Elena Mine (open pit and underground) and exploration programs are rapidly advancing the definition of a large polymetallic deposit at the La Joya property in Durango State.
FORWARD-LOOKING STATEMENTS
This news release contains “forward-looking statements” within the meaning of Canadian securities legislation and the United States Securities Litigation Reform Act of 1995. Such forward-looking statements concern the Company’s anticipated results and developments in the Company’s operations in future periods, planned exploration and development of its properties, plans related to its business and other matters that may occur in the future. These statements relate to analyses and other information that are based on expectations of future performance, including silver and gold production and planned work programs. Statements concerning reserves and mineral resource estimates may also constitute forward-looking statements to the extent that they involve estimates of the mineralization that will be encountered if the property is developed and, in the case of mineral reserves, such statements reflect the conclusion based on certain assumptions that the mineral deposit can be economically exploited.
Forward-looking statements are subject to a variety of known and unknown risks, uncertainties and other factors which could cause actual events or results to differ from those expressed or implied by the forward-looking statements, including, without limitation: risks related to precious and base metal price fluctuations; risks related to fluctuations in the currency markets (particularly the Mexican peso, Canadian dollar and United States dollar); risks related to the inherently dangerous activity of mining, including conditions or events beyond our control, and operating or technical difficulties in mineral exploration, development and mining activities; uncertainty in the Company’s ability to raise financing and fund the exploration and development of its mineral properties; uncertainty as to actual capital costs, operating costs, production and economic returns, and uncertainty that development activities will result in profitable mining operations; risks related to reserves and mineral resource figures being estimates based on interpretations and assumptions which may result in less mineral production under actual conditions than is currently estimated and to diminishing quantities or grades of mineral reserves as properties are mined; risks related to governmental regulations and obtaining necessary licenses and permits; risks related to the business being subject to environmental laws and regulations which may increase costs of doing business and restrict our operations; risks related to mineral properties being subject to prior unregistered agreements, transfers, or claims and other defects in title; risks relating to inadequate insurance or inability to obtain insurance; risks related to potential litigation; risks related to the global economy; risks related to the Company’s status as a foreign private issuer in the United States; risks related to all of the Company’s properties being located in Mexico and El Salvador, including political, economic, social and regulatory instability; and risks related to officers and directors becoming associated with other natural resource companies which may give rise to conflicts of interests. Should one or more of these risks and uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those described in the forward-looking statements. The Company’s forward-looking statements are based on beliefs, expectations and opinions of management on the date the statements are made. For the reasons set forth above, investors should not place undue reliance on forward-looking statements.
The information provided in this news release is not intended to be a comprehensive review of all matters and developments concerning the Company. It should be read in conjunction with all other disclosure documents of the Company. The information contained herein is not a substitute for detailed investigation or analysis. No securities commission or regulatory authority has reviewed the accuracy or adequacy of the information presented.
J. Scott Drever, President
SILVERCREST MINES INC.
Neither TSX Venture Exchange nor its Regulation Services Provider (as defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Posted December 22, 2012
MORE or "UNCATEGORIZED"
Elevation Gold Reports Financial Results for Year Ended December 31, 2023, including $66.4M in Total Revenue
Elevation Gold Mining Corporation (TSX-V: ELVT) (OTCQB: EVGDF) i... READ MORE
April 18, 2024
Reunion Gold Announces the Signing of a Mineral Agreement With the Government of Guyana for Its Oko West Project
Reunion Gold Corporation (TSX-V: RGD; OTCQX: RGDFF) is pleased to announ... READ MORE
April 18, 2024
Drilling Confirms 4 km of Favourable Corridor at Lynx Gold Trend
Puma Exploration Inc. (TSX-V: PUMA) (OTCQB: PUMXF) is thrilled to... READ MORE
April 18, 2024
Grid Metals Intersects 7 m at 1.28% Li2O at over 125 m Below the Previously Deepest Drill Holes at Donner Lake; Provides Project Update
Grid Metals Corp. (TSX-V:GRDM) (OTCQB:MSMGF) is pleased to announ... READ MORE
April 18, 2024
Azimut and SOQUEM Cut Thick Spodumene Pegmatites at Galinée, James Bay Region, Quebec
Azimut Exploration Inc. (TSX-V: AZM) (OTCQX: AZMTF) is pleased ... READ MORE
April 18, 2024
