Silver Viper Minerals Corp. (TSX-V: VIPR) is pleased to provide new results from drilling at La Virginia. Of ten drill holes reported, six originate from El Rubi and four from Macho Libre. El Rubi drill hole LV20-245 has intercepted a broad zone of gold-silver mineralization over an interval of 110.5 metres1 core length (55.2 metres estimated true width) averaging 38g/t Ag and 0.76g/t Au, beginning at 75 metres depth. Calculated silver and gold equivalent values for this interval are 92g/t Ag and 1.31 g/t Au using a 70:1 Ag:Au ratio2. In addition, two further broad zones of mineralization were encountered in LV20-245.
Silver Viper is advancing prospective gold-silver exploration targets at the La Virginia project with two diamond drills. One continues systematic exploration northward along trend at the El Rubi prospect, the second has completed work at the Macho Libre prospect and is now testing the Rubi East “El Molino” prospect, 1.2km east of the El Rubi trend. Assay results from two Macho Libre drill holes are still pending.
Ongoing work at El Rubi indicates the presence of thin, high-grade structures, often within a halo of lower grade material within the footwall of the main mineralized structure. The stringers are currently interpreted as high angle secondary structures, adjacent to the main zone and drill hole LV20-245 was designed as a scissor hole, oriented eastward to assist in clarifying this interpretation. The mineralized zones in this hole are represented by breccias and quartz stockwork typical of the intervals encountered elsewhere at El Rubi, and were encountered higher in the hole than expected and were broader. Silver Viper’s interpretation of the true width/orientation of these zones will continue to evolve, as further holes are drilled. Observed vein intersection angles do not suggest the hole was drilled at a low angle to the structures.
Silver Viper’s President and CEO Steve Cope states, “We are extremely pleased to see the second of our scissor holes at El Rubi intercept a long run of mineralization, starting at a depth of 75 metres down hole. The hole was designed to intercept thin but often high-grade stringers we have seen in the footwall of the El Rubi structure. While not unexpected, the length of this interval reached 110 metres of gold-silver mineralization which is a very positive result. This discovery requires rigorous and extensive follow up, but it appears to support our belief that the western zone could reveal itself as a significant part of the El Rubi story.”
Work at El Rubi has focused on a north-northwest trending mineralized zone composed of a steeply-dipping, gold-silver bearing, quartz stockwork/breccia zone, underlain to the west by a series of mineralized structures, currently interpreted as stringers to the main zone. Mineralization at El Rubi has now been intercepted over 500 metres along trend. A second drill mobilized to site in March, provided an early test of the first of three exploration targets, namely Macho Libre. Drilling at Macho Libre is complete, with a total of 11 holes for 2,516 metres drilled over a 1,000-meter-long portion of the Macho Libre trend. The diamond drill has now moved to the second, El Molino (Rubi East) target.
Results tabulated below form part of the ongoing second phase of work at La Virginia. Phase II has advanced steadily from November 2019 up until a pause in late March of 2020, by which time the Company had completed 24 holes for a cumulative 6,955 metres. Work recommenced in June, under comprehensive and strict new COVID-19 safety protocols and monitoring. At time of writing, Phase II totals 26 drill holes for a total of 6,651 metres at El Rubi, Macho Libre and most recently, El Molino.
Tabulations of significant intercepts for the current batch of drill holes from El Rubi and Macho Libre are included below. A drill plan showing the relative locations of the collars is accessible on the Silver Viper website.
|EL RUBI DRILLING SELECTED RESULTS|
|Hole ID||From (m)||To (m)||Interval
|Ag (g/t)||Au (g/t)|
|1 True widths are difficult to estimate at this early stage of exploration. Intervals presented here are calculated for each interval based on current geological interpretation of the mineralized zones. Estimated true widths for hole LV20-245 are estimated as being 50% of drilled core length. Presently the mineralized structures are interpreted as being sub-vertical though this interpretation will be revised as additional data are generated.|
|2The calculation of silver and gold equivalents reported by Silver Viper uses an historical price ratio of 70:1, maintained at this ratio for consistency with previous releases. Calculations are made using the formulas Ag equivalent = Ag grade + (Au grade x 70), Au equivalent = Au grade + (Ag grade / 70).|
Holes LV20-235, LV20-237 and LV20-238 were drilled as part of the systematic campaign at the El Rubi discovery. LV20-325 (Azimuth 240, Dip -500) was drilled on local section 10350N and targeted the zone above (higher elevation) the previously reported LV20-234. LV20-237 (Azimuth 240, Dip -450) and LV20-238 (Azimuth 240, Dip -60) reflect local section 10400N, and intersected mineralization higher in the holes than expected, possibly indicating a slight change in orientation of the mineralization toward the north. While no significant intercepts are reported from LV20-237, a low-grade zone was encountered. Deeper follow-up holes are planned on this section.
Drill hole LV20-241 represents a single hole drilled eastward from a pad near El Rubi. Designed to test a north-south oriented secondary trend. The zone returned 1.0 metre grading 253g/t Ag and 4.19g/t Au. The structure is thought to represent the northern extension of Macho Libre.
Hole LV20-243 (Azimuth 240, Dip -650) was drilled within the El Rubi system and provides further data points for the resource calculation work being compiled by Silver Viper.
Hole LV20-245 (Azimuth 090, Dip -450) represents a scissor hole through El Rubi. Previous news releases refer to a series of thin, often well mineralized zones occurring in the footwall of and to the west of the main El Rubi zone. Hole LV20-245 was designed to pass through this stringer zone and then the main Rubi zone from the western side. Several mineralized intervals are reported from this hole, including a 110.5 metre zone between 75 metres and 185.5 metres downhole as well as a 22.5 metre zone between 239 metres and 261.5 metres and a 13 metre zone between 284.5 metres and 297.5 metres down hole. The results reported indicate the possibility of a broader than expected western zone. Further exploration of this area is warranted. The current data is being incorporated into the developing exploration resource calculation models.
|MACHO LIBRE SELECTED DRILLING RESULTS|
|Hole ID||From (m)||To (m)||Interval
|Ag (g/t)||Au (g/t)|
Drilling at Macho Libre tested a 1.0 km long portion of an elongate north-south structure, demonstrated to host gold and silver mineralization, at several points along its trend. The northernmost drilling at Macho Libre is situated 600 metres south of the southernmost Rubi drilling.
The reconnaissance holes reported herein targeted a mineralized structure mapped at surface, and it is possible that in most cases the structure was not intercepted at the optimal depth. Mineralization at Macho Libre is related to silicified and oxidized breccia hosting fine quartz veining. Sample results related to two additional drill holes have yet to be returned from the laboratory.
El Molino is a visibly oxidized and silicified zone, hosting fine quartz veinlets, in tight stockwork and breccia zones, oriented in steeply dipping northwest-southeast oriented structures, within andesitic host rocks of the lower volcanic sequence. The target is roughly parallel to and located approximately 1.2 km east of the El Rubi trend. The location is characterized by reddish coloured, sheer cliffs and a coincident multi-point gold and silver soil geochemical anomaly measuring 800 metres x 250 metres.
About the Project
La Virginia is located 220 km east-northeast of Hermosillo, Sonora. It is a large exploration area, primarily prospective for fault-controlled, low-sulphidation epithermal precious metal mineralization. The Property and historical exploration database were acquired by way of option agreements made with two distinct parties. Gold and silver mineralization at La Virginia occurs within breccias, veins and stockworks, hosted primarily by andesitic volcanics, often in close spatial association to, or cross-cutting pre-mineral dacite dykes and controlled by fractures and faults that define the regional structural trend. Originally 37,700 hectares in size, Silver Viper’s reconnaissance program has identified key targets and trends which are of primary interest. The Company has filed reductions of the large concessions to better focus efforts on the high priority trends.
At La Virginia, Silver Viper’s Phase I drilling comprised work over five target areas totaling 4,753 metres in 20 drill holes. Phase II drilling was paused in March of 2020 at a meterage of 6,955 metres in 24 holes. Work recommenced in mid-June and is expected to continue for the coming months. Hermosillo-based drill contractor, Globexplore Drilling Corp., has provided the drilling services. Drilling by the Company to date builds upon a sizeable database including 52,635 metres of drill core from 188 diamond drill holes, generated by the efforts of previous operators between 2010 and 2013. Silver Viper is expanding upon this work by continuing exploration northward into prospective untested ground. A recently completed airborne survey was flown by Geotech Ltd.
Analytical results of drilling intercepts reported by Silver Viper represent samples of halved diamond drill core submitted by Silver Viper staff directly to Bureau Veritas, Hermosillo, Sonora, Mexico. Samples were crushed, split and pulverized as per Bureau Veritas method PRP70-250, then analysed for gold by lead collection fire assay fusion on a 30g split with AAS finish, and for a multi-element suite including silver by multi-acid digestion with ICP-ES/MS finish. Samples triggering precious metal over-limit thresholds of 10g/t Au or 200g/t Ag were retested by lead collection fire assay fusion with a gravimetric finish. Silver Viper monitors QA/QC using commercially sourced standards and locally sourced blank materials inserted within the sample sequence at regular intervals.
Dale Brittliffe, P.Geo., Vice President of Exploration, is the ‘Qualified Person’ under National Instrument 43-101 and has approved the scientific and technical information contained in this news release. Ongoing verification of scientific and technical information is achieved by direct involvement in the exploration work.
About the Company
Silver Viper Minerals Corp., is a Canadian-based junior mineral exploration company focused on precious metals exploration in the northwestern Mexican state of Sonora. The Company currently operates the La Virginia Gold-Silver Project. Silver Viper has 100% ownership of the La Virginia concessions acquired from the most recent operator, Pan American Silver Corp., and has an option to acquire a 100% interest in the Rubi-Esperanza group of claims internal to those concessions. Silver Viper is under management provided by the Belcarra Group, which is comprised of highly qualified mining professionals.
Highlights Indicative term sheets received from eight European, A... READ MORE
Filo Mining Corp. (TSX: FIL) (Nasdaq First North Growth Market: ... READ MORE
Candente Copper Corp. (TSX:DNT) (BVL:DNT) is pleased to announce ... READ MORE
Oroco Resource Corp. (TSX-V: OCO, OTC: ORRCF) announces assay res... READ MORE
TinOne Resources Inc. (TSX-V: TORC) (OTCQB: TORCF) is pleased t... READ MORE
We acknowledge the [financial] support of the Government of Canada.