Reunion Gold Corporation (TSX-V: RGD) is pleased to report new high-grade gold intersections at the Boulanger Project in French Guiana.

A 1,100-meter core drilling program in six drill holes was done in June 2019 at the Central Bief and Carapa prospects (Figure 1) to test targets identified from the 2018 and 2019 induced polarization (IP) geophysical surveys and geological mapping by the Company. Results are reported in Table 1 and Table 2.

Of interest is the Crique Filon target located within the Carapa permit (Figure 2 and Figure 3). Hole CA-19-05 was drilled intending to intercept further east a shear cut in hole CB-19-13 and previous drill holes. The eastern extension of the shearing was cut with two significant intercepts:

• 47 g/t gold over 23 meters. This first high-grade section from 22.5 to 24.1 meter consists of andesite saprolite with quartz tourmaline probably in tension veining and averages 6.68 g/t gold over 3.1 meters. A second section at 9.73 g/t gold from 41.0 to 42.0 meters is at the beginning of a three-meter-thick shear zone.
• 34 g/t Au over 11.14 meters. This high-grade composite runs in a sheared quartz-tourmaline-pyrite vein with visible gold noted at 143.7 m.

Several shear zones straddle across the Carapa PER and Doyle concession limits in the Crique Filon area. The two shear zones intercepted by the recent drilling can be traced over 300 meters and 200 meters, respectively (Figure 2). They remain open on strike and at depth. Several other attractive shear zones are found in the same area that progressively builds up as a very attractive priority target. A follow-up drilling program is being prepared.

The Boulanger Project

The Boulanger Project consists of 38.4 km² of mining concessions (Central Bief, Devez North and South, and Boulanger), the 24 km² Carapa exploration permit, the 1 km² Saint-Michel AEX and the 45.7 km² Chawari permit application. The project is located approximately 40 km south of Cayenne and readily accessible by paved and laterite roads. There has been significant gold production from the project area for over one hundred years.

The Boulanger Project is underlain by Proterozoic rocks consisting of Armina detritic sediments and Paramaca volcano-sediments intruded by granites and metamorphosed to greenschist facies. The Boulanger Project area is cut by various shear zones characterized by intense deformation and hydrothermal alteration. Gold is associated with quartz veins, pyrite and locally intense tourmaline alteration. Geological mapping and soil geochemistry indicate numerous anomalous zones that require follow-up exploration. The Company has an option to acquire a 100% interest in the Boulanger Project from Compagnie Minière de Boulanger.

Quality analysis and quality control

The Company has implemented a quality assurance and quality control (QA/QC) program and chain of custody protocols for all its sampling and particularly for drilling programs. Certified standards and blanks are respectively inserted in average every 20 samples, resulting in the insertion of about 10 percent of control samples. In addition, blanks are inserted after visually identifying mineralized zones to ensure that the results are meaningful. The samples are analyzed for gold by fire assay with atomic absorption finish on 30‐gram pulps by the FILAB-AMSUD laboratory in Surinam. Samples above 10 g/t gold are systematically re‐analyzed with gravimetry finish. FILAB-AMSUD is an accredited laboratory for quality procedure according to ISO 9001(2008) and ISO/IEC 17025.

Qualified Persons

Dr. Dominique Fournier, EurGeol., the exploration manager for Reunion Gold in French Guiana and a qualified person pursuant to National Instrument 43-101, is responsible for the work being done at the Boulanger Project. Carlos Bertoni, P. Geo., a consultant to Reunion Gold and a qualified person pursuant to National Instrument 43-101, has reviewed and approved the scientific and technical data contained in this press release.

About Reunion Gold

Reunion Gold Corporation is a Canadian exploration company focused on acquiring, exploring and developing gold projects in the Guiana Shield, South America. The Company’s shares are listed on the TSX Venture Exchange under the symbol ‘RGD’.

Table 1

(1) It is not possible at this time to determine true widths. All widths of intercepts reported are core length.

Table 2

Details for holes drilled in the Central Bief-Carapa area