The Prospector News

Red Pine Intercepts 2.39 g/t Gold over 39.07 m including 7.99 g/t Gold over 6.99 m at the Wawa Gold Project

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Red Pine Intercepts 2.39 g/t Gold over 39.07 m including 7.99 g/t Gold over 6.99 m at the Wawa Gold Project

 

 

 

 

 

Red Pine Exploration Inc. (TSX-V: RPX) (OTCQB: RDEXF) is pleased to announce the most recent assay results from 5 additional drill holes representing 1,211 metres as part of the completed 2022-2024 resource expansion drill program at the Wawa Gold Project, Ontario.

 

Since 2022, Red Pine has completed approximately 67,000 m of diamond drilling. Of this total, approximately 60,300 m of drilling will be used to update the mineral resource estimate with an effective database cut-off date of June 21, 2024. The independent 43-101 resource estimate is expected to be completed in August. The results being announced today, in addition to the remaining results yet to be released from approximately 5,000 m of drill core in 22 drill holes, will not be included in the mid-August resource update, but at a later date.

 

Drilling Highlights and Discussion of Results (Tables 1-2, Figures 1-2):

  • 2.39 grams per tonne gold over 39.07 m, including 7.99 g/t gold over 6.99 m in SD-24-497 in the Jubilee Shear System.

 

The results indicate:

  • The presence of thick zones of significant gold mineralization within the Jubilee Shear;
  • Drilling has continued to increase the size and confirm the continuity of gold mineralization > 2.00 g/t gold in the main segment of the Jubilee Shear;
  • Gold mineralization remains open at depth in the Jubilee Shear down-dip and down-plunge of the existing mineral resource and to a lesser extent within areas of the former mineral resource where gaps in drilling remain; and
  • Drilling continues to better define gold mineralization in both the Hanging Wall (“HW”) and Foot Wall of the Jubilee Shear.

 

Mike Michaud, President and CEO of Red Pine commented: “I am pleased to have now joined, and am looking forward to leading the Red Pine team. Exploration success over the past several years has not only identified high grade mineralization outside of the previously mined zones, but has also confirmed the potential to host a sizeable gold deposit near surface.

 

The latest drill results not only highlight the potential of the Jubilee Shear to host significant gold mineralization over thick sections, but drilling has also confirmed that gold mineralization remains open down dip and down plunge, a priority for future drilling.

 

In addition, we are targeting the updated National Instrument 43-101 Technical Report to be completed in August 2024 and expect the Mineral Resource Estimate component of that report to be press released in advance of that date. Once completed, we will be able to use this resource estimate to better assess various underground and open pit mining and processing scenarios to guide next steps on the project.”

 

Quality Assurance/Quality Control Measures

 

Drill core samples are transported in security sealed bags for analyses to Actlabs in Ancaster, Ontario. Individual samples are labelled, placed in plastic sample bags and sealed. Groups of samples are then placed into durable rice bags and shipped. HQ core assays were obtained by 50-gram fire-assaying-AA finish or by 1-kilogram screen fire assay. The 1-kilogram screen assay method is selected for samples anticipated to contain coarse gold and when the fire-assay-AA finish return results greater or equal to 2.25 g/t gold. The residual coarse reject portions of the samples remain in storage for a minimum 90-day period if further work or verification is needed.

 

As part of its updated and independently reviewed QA/QC program, Red Pine inserts external gold standards (low to high grade) and blanks every 20 samples, and routinely insert blanks immediately after samples with visible gold. Quarter core duplicates are routinely inserted to evaluate the natural variability of gold mineralization. Assay certificates are sent to at least two members of the senior management team, and they are directly accessible from the WebLIMS portal of Actlabs.

 

Table 1 –Jubilee Shear System (Figures 1 to 2)

 

Hole From To Length Gold Zone
(#)  (m)  (m) (m)*  (g/t)  (name) 
SD-24-497 181.00 220.07 39.07 2.39 Jubilee Shear
including 191.01 198.00 6.99 7.99  
Including 191.01 193.01 2.00 11.29  
and 194.03 196.04 2.01 8.43  
and 197.00 198.00 1.00 13.20  
including 218.15 219.00 0.85 5.49  
SD-24-503A 397.36 400.21 2.85 1.54 FW Jubilee Shear
  424.66 426.00 1.34 2.00  
SD-24-507 239.90 247.29 7.39 1.14 Jubilee Shear
Including 241.09 242.32 1.23 4.40  
SD-24-513 164.00 168.08 4.08 1.05 Jubilee Shear
Including 164.00 165.38 1.38 2.21  
SD-24-516 146.00 150.00 4.00 0.57 Jubilee Shear
  209.75 210.75 1.00 1.03 FW Jubilee Shear
*Intercepts are calculated using a 0.40 g/t gold cut-off and a maximum of 6 m of internal dilution with no capping applied and are reported over core lengths. True widths are estimated to vary between 75 to 95% of the reported core length.

Table 2 – Drill hole location

 

Hole (#)  UTM E
(m)
UTM N
(m)
Elevation
(masl)
Azimuth
(°)
Inclination (°) Length (m)
SD-24-497 668168 5316127 366 346 52 345.00
SD-24-503A 668585 5316354 380 332 58 465.00
SD-24-507 668146 5315995 363 125 77 380.50
SD-24-513 668254 5316414 373 141 81 307.71
SD-24-516 668262 5316408 372 315 54 258.00

Qualified Person

 

Jean-Francois Montreuil, P.Geo. and Vice President, Exploration of Red Pine and the Qualified Person, as defined by National Instrument 43-101, has reviewed and approved the technical information contained in this news release.

 

About Red Pine Exploration Inc.

 

Red Pine Exploration Inc. is a gold exploration company headquartered in Toronto, Ontario, Canada. The Wawa Gold Project is in the Michipicoten Greenstone Belt of Ontario, a region that has seen major investment by several producers in the last five years. The Company’s land package hosts numerous historic gold mines and is over 7000 hectares in size. Red Pine is building a strong position as a major mineral exploration and development player in the Michipicoten region.

 

 

Figure 1 – Location of Diamond Drilling Results

 

 

Figure 2 – 3D View of Diamond Drilling Results

 

Posted July 18, 2024

Share this news article

MORE or "UNCATEGORIZED"


Goldshore intersects 79.0m of 1.28g/t Au at the Southwest Zone of the Moss Deposit: Extends mineralization from current resource model in the top 100 meters from surface

Goldshore Resources Inc. (TSX-V: GSHR) (OTCQB: GSHRF) (FWB: 8X00), is pleased to announce the first... READ MORE

January 17, 2025

Alphamin Announces Record FY2024 and Q4 2024 Tin Production FY2025 Production Guidance Exploration Success

Alphamin Resources Corp. (TSX-V:AFM) (JSE AltX:APH) is pleased to provide the following update for t... READ MORE

January 17, 2025

Winshear Reports Drilling Results from the Coritiri Zone, Gaban Gold Project in Peru

Winshear Gold Corp. (TSX-V: WINS) is pleased to report the results of its 2024 maiden drill program... READ MORE

January 16, 2025

Hudbay Celebrates Major Milestone with Millionth Ounce of Gold Recovered from Lalor Mine

Hudbay Minerals Inc. (TSX: HBM) (NYSE: HBM) is pleased to announce that it has surpassed a total of... READ MORE

January 16, 2025

Azimut’s Initial Drill Results Indicate an Extensive Antimony Zone on the Wabamisk Gold Property, Quebec, Canada

Azimut Exploration Inc. (“Azimut” or the “Company”) (TSXV: AZM) (OTCQX: AZMTF) is pleased... READ MORE

January 16, 2025

Copyright 2025 The Prospector News