Osisko Mining Inc. (TSX:OSK) is pleased to provide new analytical results from the ongoing drill program at its 100% owned Windfall gold project located in the Abitibi greenstone belt, Urban Township, Eeyou Istchee James Bay, Québec.
Significant new analytical results presented below include 27 intercepts in 8 drill holes (1 from surface, 8 from underground) and 8 wedges. Infill intercepts are located inside defined January 2022 mineral resource estimate blocks (see Osisko news release dated January 10, 2022). Expansion intercepts are located outside the January 2022 MRE blocks and either expand resource wireframes or are in a defined zone or corridor but do not yet correlate to a specific wireframe.
Osisko Chief Executive Officer John Burzynski commented: “The infill program at Windfall continues to intercept high-grade mineralization. Today’s wide headline hole comes from Triple Lynx wireframe 3161 which has another wide zone of 41.4 g/t Au over 9.0 metres. Infill at Underdog is also returning intercepts of over one ounce per tonne over more than two meters.”
Selected high-grade intercepts include: 58.9 g/t Au over 14.7 metres in WST-21-0996A; 41.4 g/t Au over 9.0 metres in WST-21-0928; 88.0 g/t Au over 3.0 metres in WST-21-0997; 49.8 g/t Au over 3.9 metres in WST-21-0914; 81.5 g/t Au over 2.0 metres in WST-21-0936A; and 60.0 g/t Au over 2.4 metres in OSK-W-21-2463-W3. Maps showing hole locations and full analytical results are available at www.osiskomining.com. Maps: Long Section_In EN 20220329, PR_EN_20220329_Surface, PR_EN_20220329_UG.
Infill Drilling
Hole No. | From (m) | To (m) | Interval (m) | Au (g/t) uncut | Au (g/t) cut to 100 g/t | Zone | Corridor |
OSK-W-21-1871-W3 | 816.3 | 820.7 | 4.4 | 22.6 | UDD_4101 | Underdog | |
including | 816.3 | 817.0 | 0.7 | 86.0 | |||
and | 820.2 | 820.7 | 0.5 | 60.6 | |||
OSK-W-21-2463-W3 | 971.5 | 973.9 | 2.4 | 60.0 | 47.1 | UDD_4122 | Underdog |
including | 972.8 | 973.9 | 1.1 | 128 | 100 | ||
OSK-W-21-2544-W1 | 791.7 | 794.0 | 2.3 | 4.13 | TLX_3184 | Triple Lynx | |
including | 791.7 | 792.0 | 0.3 | 11.6 | |||
797.7 | 800.0 | 2.3 | 12.2 | TLX_3159 | Lynx HW | ||
including | 798.3 | 798.9 | 0.6 | 45.3 | |||
OSK-W-21-2599 | 702.8 | 705.8 | 3.0 | 4.83 | CA2_2208 | Caribou | |
including | 702.8 | 703.5 | 0.7 | 16.6 | |||
WST-21-0914 | 250.1 | 254.0 | 3.9 | 49.8 | 46.3 | LSW_3500 | Lynx SW |
including | 250.1 | 250.4 | 0.3 | 146 | 100 | ||
WST-21-0928 | 273.1 | 282.1 | 9.0 | 41.4 | 33.0 | TLX_3161 | Triple Lynx |
including | 275.8 | 277.1 | 1.3 | 155 | 96.5 | ||
WST-21-0936A | 527.0 | 529.0 | 2.0 | 81.5 | 25.2 | LX4_3450 | Lynx 4 |
including | 527.8 | 528.3 | 0.5 | 325 | 100 | ||
WST-21-0996A | 146.3 | 161.0 | 14.7 | 58.9 | 32.2 | TLX_3161 | Triple Lynx |
including | 150.6 | 151.3 | 0.7 | 650 | 100 | ||
WST-21-0997 | 589.0 | 592.0 | 3.0 | 88.0 | 43.0 | LX4_3430 | Lynx 4 |
including | 589.7 | 590.7 | 1.0 | 235 | 100 | ||
WST-22-1000 | 166.0 | 168.1 | 2.1 | 5.82 | TLX_3163 | Triple Lynx | |
including | 167.2 | 167.7 | 0.5 | 22.1 | |||
232.8 | 235.0 | 2.2 | 5.09 | TLX_3169 | Triple Lynx | ||
256.4 | 258.6 | 2.2 | 4.43 | TLX_3175 | Triple Lynx | ||
including | 256.4 | 256.9 | 0.5 | 18.1 | |||
372.3 | 374.5 | 2.2 | 4.03 | TLX_3191 | Triple Lynx | ||
including | 373.7 | 374.5 | 0.8 | 9.19 | |||
WST-22-1001 | 503.4 | 506.3 | 2.9 | 6.60 | LX4_3404 | Lynx 4 | |
including | 505.5 | 505.8 | 0.3 | 19.5 | |||
WST-22-1006 | 186.8 | 189.0 | 2.2 | 35.6 | 14.8 | TLX_3121 | Triple Lynx |
including | 186.8 | 187.1 | 0.3 | 252 | 100 | ||
512.0 | 518.3 | 6.3 | 9.22 | LX4_3404 | Lynx 4 | ||
including | 512.3 | 513.5 | 1.2 | 25.7 | |||
and | 517.8 | 518.3 | 0.5 | 39.4 |
Notes: True widths are estimated at 55 – 80% of the reported core length interval. See “Quality Control and Reporting Protocols” below. CA2= Caribou 2, LX4 = Lynx 4, LSW = Lynx Southwest, TLX = Triple Lynx and UDD=Underdog.
Expansion Drilling
Hole No. | From (m) | To (m) | Interval (m) | Au (g/t) uncut | Au (g/t) cut to 100 g/t | Zone | Corridor |
OSK-W-21-2540-W3 | 1280.0 | 1282.0 | 2.0 | 17.7 | LX4 | Lynx 4 | |
including | 1281.4 | 1282.0 | 0.6 | 58.6 | |||
OSK-W-21-2540-W9 | 1192.0 | 1194.0 | 2.0 | 3.68 | LX4 | Lynx 4 | |
1202.0 | 1208.0 | 6.0 | 7.68 | LX4 | Lynx 4 | ||
including | 1207.0 | 1208.0 | 1.0 | 32.9 | |||
1230.0 | 1232.0 | 2.0 | 15.3 | LX4 | Lynx 4 | ||
1282.7 | 1287.8 | 5.1 | 4.94 | LX4 | Lynx 4 | ||
including | 1287.0 | 1287.8 | 0.8 | 19.3 | |||
OSK-W-21-2646-W1 | 1067.0 | 1070.0 | 3.0 | 3.95 | TLX | Triple Lynx | |
OSK-W-22-2540-W12 | 867.4 | 869.5 | 2.1 | 6.29 | LNX | Lynx | |
including | 868.4 | 868.7 | 0.3 | 39.5 | |||
OSK-W-22-2540-W13 | 879.5 | 881.8 | 2.3 | 7.40 | LNX | Lynx | |
including | 879.5 | 880.4 | 0.9 | 18.8 | |||
940.0 | 942.0 | 2.0 | 6.01 | TLX | Triple Lynx | ||
including | 940.0 | 940.5 | 0.5 | 23.3 | |||
WST-22-1006 | 609.0 | 611.1 | 2.1 | 8.40 | LX4 | Lynx 4 | |
including | 609.9 | 610.6 | 0.7 | 24.8 |
Notes: True widths are estimated at 55 – 80% of the reported core length interval. See “Quality Control and Reporting Protocols” below., LNX = Lynx, LX4 = Lynx 4 and TLX = Triple Lynx.
Drill hole location
Hole Number | Azimuth (°) | Dip (°) | Length (m) | UTM E | UTM N | Elevation | Section |
OSK-W-21-1871-W3 | 331 | -56 | 906 | 452496 | 5434397 | 402 | 2475 |
OSK-W-21-2463-W3 | 339 | -65 | 1299 | 452617 | 5434447 | 402 | 2600 |
OSK-W-21-2540-W3 | 117 | -60 | 1470 | 453465 | 5435640 | 410 | 3925 |
OSK-W-21-2540-W9 | 117 | -60 | 1349 | 453465 | 5435640 | 410 | 3925 |
OSK-W-21-2544-W1 | 128 | -50 | 1140 | 452960 | 5435539 | 419 | 3425 |
OSK-W-21-2599 | 328 | -62 | 774 | 452787 | 5434526 | 397 | 2800 |
OSK-W-21-2646-W1 | 109 | -58 | 1236 | 453326 | 5435648 | 413 | 3800 |
OSK-W-22-2540-W12 | 117 | -60 | 885 | 453465 | 5435640 | 410 | 3925 |
OSK-W-22-2540-W13 | 117 | -60 | 911 | 453465 | 5435640 | 410 | 3925 |
WST-21-0914 | 148 | -59 | 502 | 453105 | 5435066 | 231 | 3325 |
WST-21-0928 | 154 | -70 | 391 | 453507 | 5435327 | -7 | 3800 |
WST-21-0936A | 137 | -48 | 570 | 453257 | 5435209 | 96 | 3525 |
WST-21-0996A | 143 | -45 | 427 | 453358 | 5435297 | -149 | 3675 |
WST-21-0997 | 119 | -45 | 640 | 453506 | 5435326 | -90 | 3800 |
WST-22-1000 | 139 | -45 | 447 | 453359 | 5435297 | -149 | 3675 |
WST-22-1001 | 124 | -46 | 637 | 453506 | 5435326 | -90 | 3800 |
WST-22-1006 | 122 | -45 | 610 | 453506 | 5435326 | -90 | 3800 |
Caribou Zone
Mineralization most commonly occurs in gold-bearing pyrite stockworks as well as semi-massive pyrite replacement zones associated with phyllic alteration (sericite-pyrite ± silica) with sulphides, pyrite dominated with minor chalcopyrite and sphalerite ranging from trace to up to 20%, and local visible gold. Mineralization is hosted in rhyolites or mafic-intermediate volcanics frequently at or near faults or the contact with felsic porphyritic intrusions.
Lynx Zone
Mineralization occurs as grey to translucent quartz-carbonate-pyrite-tourmaline veins and pyrite replacement zones and stockworks. Vein-type mineralization is associated with haloes of pervasive sericite-pyrite ± silica alteration and contain sulphides (predominantly pyrite with minor amounts of chalcopyrite, sphalerite, galena, arsenopyrite, and pyrrhotite) and local visible gold. Replacement mineralization is associated with strong pervasive silica-sericite-ankerite ± tourmaline alteration and contains disseminated pyrite from trace to 80% with local visible gold. Pyrite stockworks can form envelopes that reach several tens of metres in thickness. Fuchsite alteration is common and is spatially constrained to near the gabbros. Mineralization occurs at or near geological contacts between felsic porphyritic or fragmental intrusions and the host rhyolites or gabbros and locally can be hosted along the gabbro-rhyolite contact.
Underdog
Mineralization most commonly occurs in gold-bearing quartz-pyrite (± tourmaline) veins and as disseminated, stringer, semi-massive to massive pyrite with minor sphalerite, chalcopyrite and molybdenite associated with strong sericite and silica alteration. Mineralization is hosted along the intrusive contacts of a three-phase composite felsic porphyritic unit which cross-cuts felsic and mafic volcanic sequences.
Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Louis Grenier, M.Sc.A., P.Geo. (OGQ 800), Director of Exploration for Osisko’s Windfall gold project, who is a “qualified person” as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”).
Quality Control and Reporting Protocols
True width determination is estimated at 55-80% of the reported core length interval for the zone. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Reported intervals include minimum weighted averages of 3.5 g/t Au diluted over core lengths of at least 2.0 metres. NQ core assays were obtained by either 1-kilogram screen fire assay or standard 50-gram fire-assaying-AA finish or gravimetric finish at (i) ALS Laboratories in Val d’Or, Québec, Vancouver, British Colombia, Lima, Peru or Vientiane, Laos (ii) Bureau Veritas in Timmins, Ontario. The 1-kilogram screen assay method is selected by the geologist when samples contain coarse gold or present a higher percentage of pyrite than surrounding intervals. Selected samples are also analyzed for multi-elements, including silver, using a Four Acid Digestion-ICP-MS method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples for QA/QC purposes by the Corporation as well as the lab. Approximately 5% of sample pulps are sent to secondary laboratories for check assay.
About the Windfall Gold Deposit
The Windfall gold deposit is located between Val-d’Or and Chibougamau in the Abitibi region of Québec, Canada. The Mineral Resource Estimate defined by Osisko, as disclosed in the news release dated January 10, 2022 is supported by the technical report entitled “Mineral Resource Estimate Update for the Windfall Project” dated February 10, 2022 (with an effective date of October 21, 2021), and assuming a cut-off grade of 3.50 g/t Au, comprises 565,000 tonnes at 11.6 g/t Au (210,000 ounces) in the measured mineral resource category, 8,907,000 tonnes at 10.5 g/t Au (2,994,000 ounces) in the indicated mineral resource category and 13,035,000 tonnes at 8.6 g/t Au (3,585,000 ounces) in the inferred mineral resource category. The key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in the January 10, 2022, news release, certain of which are described in the January 10, 2022, news release, are further described in the full technical report for this updated mineral resource estimate in accordance with NI 43-101 and is available on SEDAR (www.sedar.com) under the Corporation’s issuer profile. The Windfall gold deposit is currently one of the highest-grade resource-stage gold projects in Canada and has world-class scale. Mineralization occurs in three principal zones: Lynx, Main Zone, and Underdog. Mineralization is generally comprised of sub-vertical zones following intrusive porphyry contacts plunging to the northeast. The resources are defined from surface to a depth of 1,600 metres as it now includes the Triple 8 (T8) zone. The resources excluding T8 are defined from surface to a depth of 1,200 metres. The deposit remains open along strike and at depth. Mineralization has been identified at surface in some areas and as deep as 2,625 metres in others with significant potential to extend mineralization down-plunge and at depth.
About Osisko Mining Inc.
Osisko is a mineral exploration company focused on the acquisition, exploration, and development of gold resource properties in Canada. Osisko holds a 100% interest in the high-grade Windfall gold deposit located between Val-d’Or and Chibougamau in Québec and holds a 100% undivided interest in a large area of claims in the surrounding Urban Barry area and nearby Quévillon area (over 2,500 square kilometres).
Red Pine Exploration Inc. (TSX-V: RPX) (OTCQB: RDEXF) is pleased ... READ MORE
F3 Uranium Corp. (TSX-V: FUU) (OTC Pink: FUUFF) is pleased to ann... READ MORE
Collective Mining Ltd. (NYSE: CNL) (TSX: CNL) is pleased to ann... READ MORE
Aris Mining Corporation (TSX: ARIS) (NYSE-A: ARMN) announces t... READ MORE
Staffing in place and operations shakedown underway Rare E... READ MORE