The Prospector News

O3 Mining Intersects 9.7 g/t Au Over 1.8 Metres At East Cadillac, And Provides Drilling Update

You have opened a direct link to the current edition PDF

Open PDF Close

Share this news article

O3 Mining Intersects 9.7 g/t Au Over 1.8 Metres At East Cadillac, And Provides Drilling Update






O3 Mining Inc. (TSX-V:OIII) is pleased to provide an update on Phase 1 drilling at its East Cadillac property, located 40 km East of Val D’Or, Quebec. The drilling is part of the companies 50,000 m drilling program on it’s Val D’Or properties.


Drilling commenced on January 7th 2020, and to date 12,260 m (including 6,427 m within the Globex option) out of 15,000 m have been completed in 25 drill holes. Before the suspension due to COVID-19, two drill rigs were targeting the Simon West, Nordeau West, Nordeau East and North Contact targets on the East Cadillac Property. The focus of this first phase of drilling was to expand known mineralization at the different zones as well as fence drilling on both sides of the historic Chimo Mine, to gain a better understanding of the mineralization and underlying stratigraphy of the units.


The East Cadillac property covers approximately 20 km of a prolific segment of the easternmost part of the Cadillac Larder Lake Fault (CLLF) corridor and surrounding the Chimo gold mine, with a historic production of 379,000 oz Au with an average grade of 4.0 g/t Au. Significant intercepts have been obtained by previous explorers on the East Cadillac property, associated with mineralization styles similar to the ore zones present at the Chimo mine. Two mineralized corridors (Figure 1) have been identified on the East Cadillac property. Both are splays of the CLLF. The northern corridor contains the North Contact zone, and the southern corridor contains the Simon West, the Nordeau West and the Nordeau East zones.


Drilling Highlights


  • North Contact:  Located along the northern splay of the CLLF. Three holes were drilled to follow up on the historical intercept of 1.1 g/t Au over 23.5 m including 6.86 g/t Au over 2.0 m (See Press Release May 31, 2018). Best intercepts include 3.1 g/t Au over 7.0 metres including 4.6 g/t Au over 2.9 metres and including 5.3 g/t Au over 1.5 metres, in drill hole O3EC-20-007. These three holes were drilled 100 meters apart, testing lateral and depth extensions of the historical hole.  The North Contact zone was recognized in all three drill holes and thus remains open in all directions.
  • Simon West: Located west of the former Chimo mine. One fence was drilled to target several stacked mineralized zones. Best intercepts include 9.7 g/t Au over 1.8 metres in hole O3EC-20-002 and 8.9 g/t Au over 2.0 metres including 18.9 g/t Au over 0.5 metres in drill hole O3EC-20-003. These intercepts warrant follow up as they are at least 100 meters from any previous hole, are partially open laterally and fully open at depth. The Simon west intercepts are shallow, 200-300 metres depth, respectively.
  • Nordeau West: Located east of the former Chimo mine. One fence was drilled to target the same volcanic package found at Simon West and five holes were targeting down-dip and lateral extensions of the Nordeau West zone. Best intercepts include 10.2 g/t Au over 0.5 metres in O3EC-20-008 and 10.1 g/t Au over 0.6 metres in hole O3EC-20-012.
  • Nordeau East: Located 1.7 km east of Nordeau West. Six holes were drilled approximately 200 m apart to test the down-dip extension of mineralization near surface. Best intercepts include 29.7 g/t Au over 0.5 metres in drill hole O3EC-20-018, and 8.3 g/t Au over 1.3 metres in drill hole O3EC-20-016.


O3 Mining President and CEO, Jose Vizquerra commented: “The drill intercepts at the North Contact and Simon West expanded the historic intercepts with superior grade intervals and remained open laterally and at depth. These results demonstrate a significant potential to build economic zones in terms of size, grade and at shallow depth. Once the Quebec government lifts the suspension, we will complete what is remaining of the 15,000 meters program. These positive results increase our confidence in the potential for gold mineralization in East Cadillac and will help focus our drilling for Phase 2.”


Table 1: Drill Hole Intercepts (only intercepts above 5 g/t Au * m are reported)



Drill Hole ID From (m) To  (m) Length (m) Au (g/t)   uncut Mineralized Zone
O3EC-20-001 231.9 235.8 3.9 2.0 North Contact
O3EC-20-007 319.0 326.0 7.0 3.1
including 319.0 321.9 2.9 4.6
Including 324.5 326.0 1.5 5.3
O3EC-20-009 185.0 189.3 4.3 1.8
O3EC-20-002 161.0 162.8 1.8 9.7 Simon West

Zone 2

and 173.5 174.5 1.0 5.4
O3EC-20-004 173.0 186.5 13.5 1.0 Simon West

Zone 6

including 177.0 180.5 3.5 2.4
O3EC-20-003 527.0 529.0 2.0 8.9
including 527.5 528.0 0.5 18.9
O3EC-20-008 89.0 89.5 0.5 10.2 Nordeau West
O3EC-20-012 412.9 413.5 0.6 10.1
O3EC-20-016 365.0 365.7 0.7 9.7 Nordeau East
and 375.5 376.8 1.3 8.3
O3EC-20-018 342.5 343.0 0.5 29.7
O3EC-20-019 477.6 479.0 1.4 3.6
CH-19-54 358.4 358.9 0.5 16.3 Unassigned


NOTE: True width determination is currently unknown but is estimated at 65-80% of the reported core length interval for the zones. Results from hole O3EC-20-001 and O3EC-20–003 are partial, Simon West zones 2 and 6 assays results pending.


The North Contact zone is within the northern splay of the CLLF, at or near the contact of a small unit of mafic volcanic rocks with the surrounding wacke. Holes O3EC-20-007 and O3EC-20-009 were drilled 100 m apart. In hole O3EC-20-007, the mineralized zone consists of up to 1% arsenopyrite within quartz-tourmaline-sericite veining at the contact between wacke and mafic volcanics and returned 3.1 g/t Au over 7.0 metres including 4.6 g/t Au over 2.9 metres and including 5.3 g/t Au over 1.5 metres.  Hole O3EC-20-009 intersected 1.8 g/t Au over 4.3 metres and the mineralization appears as 1% disseminated arsenopyrite, locally up to 5%, associated with quartz-tourmaline veining in a unit of mafic volcanic close to the contact with the sediments. The same horizon was also intersected in hole O3EC-20-001, located 5 km west of hole O3EC-20-007 and 300 m north of the Simon West zones. In hole O3EC-20-001 the mineralization consists of 1% arsenopyrite as clusters and disseminated associated with quartz veining within wacke occurring at the contact with the volcanic unit and return 2.1 g/t Au over 3.9 metres


The Simon West area is located just west of the former Chimo mine and consists of a stacking of several mineralized zones within or near a 600 m-thick mafic volcanic unit. The current drilling intersected Simon West zone 2 and 6 which are located inside the volcanic package near respectively the northern and southern contact with the surrounding wacke. Hole O3EC-20-002 intersected two intervals within the Simon West Zone 2, the first interval intersected 9.7 g/t Au over 1.8 metres and consists of visible gold and up to 1% pyrrhotite within a smoky quartz-chlorite vein hosted in wacke. The second interval intersected traces of finely disseminated arsenopyrite within wacke, returning 5.4 g/t Au over 1.0 metres.


The Simon West Zone 6 was intersected in hole O3EC-20-003 and O3EC-20-004, located 150 m apart. In hole O3EC-20-003, the mineralization appears as up to 3% pyrite, up to 2% arsenopyrite and up to 1% pyrrhotite, and visible gold as clusters and disseminated within an albitized basalt, containing up to 20% millimetric smoky quartz-tourmaline-fuschite veinlets and returned 8.2 g/t Au over 2.0 metres including 17.1 g/t Au over 0.5 metres. Hole O3EC-20-004 intersected 1.0 g/t Au over 13.5 metres including 2.4 g/t Au over 3.5 metres. Mineralization consists of finely disseminated pyrite and arsenopyrite associated with quartz-chlorite veinlets within a strongly to moderately albitized basalt


The Nordeau West zone is located just east of the former Chimo mine. The mineralization is located near the northern contact of the same mafic volcanic package found at Simon West, in line with the Simon West Zone 2. In hole O3EC-20-008, the mineralization is associated with a decimetric wide smoky quartz-tourmaline vein hosted in a mafic volcanic unit, with traces of disseminated arsenopyrite and pyrrhotite and returned 10.2 g/t Au over 0.5 metres. Hole O3EC-20-012 intersected  10.1 g/t Au over 0.6 metres and the mineralization consists of visible gold occurring within a quartz-tourmaline veinlet and traces of arsenopyrite hosted at the sheared contact between a basalt and mudrock with a weak sericite and biotite alteration.


The Nordeau East zone is located 1.7 km east of the Nordeau West zone, within the wacke north of the mafic volcanic package related to the Simon West and Nordeau West zones. The mineralization is related to altered iron formation bands and surrounding wacke. Six holes were drilled on the Nordeau East zone approximately 200 m apart, to test the down-dip extension of mineralization found near the surface. Hole O3EC-20-016 intersected two main intervals. The first interval intersected 9.7 g/t Au over 0.7 metres and consists of 5% pyrite stringers with a decimetric wide quartz vein hosted in an iron formation. The second interval intersected 8.2 g/t Au over 1.3 metres. The mineralization is associated with a 50 cm wide quartz vein containing up to 10% disseminated pyrite within its selvage, crosscutting an iron formation. Hole O3EC-20-018 intersected 29.7 g/t Au over 0.5 metres with the mineralization appearing as up to 3% pyrite and pyrrhotite clusters along the selvage of smoky-quartz veins hosted in an iron formation. The mineralization in hole O3EC-20-019 consists of up to 3% pyrite and arsenopyrite stringers at the contact between an iron formation and wacke and it returned 3.6 g/t Au over 1.4 metres.


Table 2: Drill Hole Details



Drill Hole ID Azimuth (˚) Dip (˚) Length (m) UTM E UTM N
O3EC-20-001 191 -45 574 330637 5320828
O3EC-20-002 189 -47 402 330470 5320599
O3EC-20-003 186 -44 588 330444 5320378
O3EC-20-004 190 -45 336 330311 5320093
O3EC-20-006 190 -45 354 330264 5319836
O3EC-20-007 197 -55 417 335598 5320288
O3EC-20-008 190 -45 384 333826 5319414
O3EC-20-009 198 -53 312 335669 5320164
O3EC-20-010A 186 -45 348 333835 5319639
O3EC-20-012 190 -45 450 333851 5319804
O3EC-20-013 190 -45 324 333827 5319152
O3EC-20-014 190 -45 327 333760 5318913
O3EC-20-015 180 -56 459 335655 5319542
O3EC-20-016 181 -71 606 335950 5319571
O3EC-20-017 184 -68 954 333673 5320163
O3EC-20-018 181 -72 706 335746 5319653
O3EC-20-019 180 -65 617 336136 5319489
O3EC-20-021 180 -59 543 336304 5319244
CH-19-54 200 -82 875* 332674 5320415


NOTE: CH-19-54 was drilled by Cartier Resources, the length reported corresponds to the length drilled into the East Cadillac property.


Figure 1 accompanying this announcement is available at


Figure 2 accompanying this announcement is available at


Qualified Person


The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Sébastien Vigneau. (OGQ #993), Exploration Manager, who is a “qualified person” as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.


Quality Control and Reporting Protocols


True width determination is currently unknown but is estimated at 65-80% of the reported core length interval for the zones. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Half-core samples are shipped to Agat laboratory in Val D’Or, Quebec and Mississauga, Ontario for assaying. The core is crushed to 75% passing -2 mm (10 mesh), a 250 g split of this material is pulverized to 85% passing 75 microns (200 mesh) and 50 g is analyzed by Fire Assay (FA) with an Atomic Absorption Spectrometry (AAS) finish. Samples assaying >10.0 g/t Au are re-analyzed with a gravimetric finish using a 50 g charge. Commercial certified standard material and blanks are systematically inserted by O3 Mining’s geologists into the sample chain after every 18 core samples as part of the QA/QC program. Third-party assays are submitted to other designated laboratories for 5% of all samples. Drill program design, Quality Assurance/Quality Control (“QA/QC”) and interpretation of results are performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices.


About O3 Mining Inc.


O3 Mining, an Osisko group of companies, is an emerging consolidator of exploration properties in prospective gold camps in Canada – focused on projects in Quebec and Ontario – with a goal of becoming a multi-million ounce, high-growth company. The Corporation’s goal is to become one of the premier gold exploration companies in Canada.


O3 Mining is well-capitalized and holds a 100% interest in a number of properties in Quebec (435,000 hectares) and Ontario (25,000 hectares). O3 Mining controls 61,000 hectares in Val D’Or and over 50 kilometres of strike length of the Cadillac-Larder Lake Faut. O3 Mining also has a portfolio of assets in the James Bay and Chibougamau regions of Quebec and in the Hemlo district in Ontario.


Posted April 9, 2020

Share this news article


K92 Mining Closes CAN$50 Million Bought Deal Financing

K92 Mining Inc. (TSX: KNT) is pleased to announce that, further t... READ MORE

July 6, 2022

NMG Issues Results of Feasibility Study for its Integrated Ore-to-Anode-Material Model Projected to be North America’s Largest Natural Graphite Operation with Attractive Economics

This news release constitutes a “designated news release” for... READ MORE

July 6, 2022


Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) i... READ MORE

July 6, 2022

Brixton Metals Drills 64m of 5.74 g/t Gold Including 28.95m of 10.36 g/t Gold at its Trapper Target on its Thorn Project

Brixton Metals Corporation (TSX-V: BBB) (OTCQB: BBBXF) is pleased... READ MORE

July 6, 2022

1911 Gold Intersects Gold Mineralization in First-Pass Drilling at the Apex Property, Manitoba

1911 Gold Corporation (TSX-V: AUMB) (OTCQX: AUMBF) is pleased t... READ MORE

July 6, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News