The Prospector News

O3 MINING INTERSECTS 6.4 g/t AU OVER 7.5 METRES AT ALPHA

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

O3 MINING INTERSECTS 6.4 g/t AU OVER 7.5 METRES AT ALPHA

 

 

 

 

 

O3 Mining Inc. (TSX-V: OIII) is pleased to provide new results from the ongoing 50,000 metre drilling program on it’s Val D’Or, Quebec properties.

 

Current drilling on the Alpha property continues to show the continuity of the Bulldog zone at depth. New analytical results from the Bulldog zone include 6.4 g/t Au over 7.5 m in hole O3AL-20-290B. This drill hole intersected the Bulldog zone at a vertical depth of 500 m and approximately 200 m east of the previously reported drill hole O3AL-20-287 (See Press Release February 28, 2020).  The Bulldog zone can now be traced over 500 metres vertically and between 100 and 200 metres laterally.  The zone remains open at depth.  Mineralization at the Bulldog zone is associated with sheared, carbonatized, and sericitized wackes and intermediate to felsic dykes containing 1–3% fine disseminated pyrite and 10% dismembered quartz veins. Three drill rigs continue to follow up on significant intercepts on the Alpha property, including one at Bulldog and two at Epsilon.

 

Table 1: Drill Hole Intercepts (only intercepts above 5 g/t Au * m are reported)

 

 

Drill hole ID From
(m)
To
(m)
Interval
(m)
Au uncut
(g/t)
Mineralized
Zone
O3AL-20-286B 521.1 526.2 5.1 2.9 Bulldog
Including 521.1 521.9 0.8 13.0  
O3AL-20-290B 589.9 622.7 32.8 1.9 Bulldog
Including 589.9 597.4 7.5 6.4  
Including 599.9 602.4 2.5 3.2  
Including 619.8 620.8 1.0 5.7  
O3AL-20-299C 43.6 44.1 0.5 14.9 Unassigned
O3AL-20-300 311.5 313.3 1.8 2.1 Bulldog

 

NOTE: True width determination is currently unknown but is estimated at 65-80% of the reported core length interval for the zones.  Results from holes 286B and 299C are partial, Bulldog zone assays results pending. 

 

Table 2: Drill Hole Details

 

 

Drill Hole ID Azimuth (˚) Dip (˚) Length (m) UTM E UTM N
O3AL-20-286B 195 -57 637 297421 5326041
O3AL-20-290B 198 -62 764 297541 5326017
O3AL-20-299C 196 -66 881 297236 5326119
O3AL-20-300 196 -50 516 297577 5325876

 

O3AL-20-286B intersected 2.9 g/t Au over 5.1 m associated to the Bulldog zone. The mineralization is related to alternating, sheared and carbonatized wacke, intermediate sericitized dykes and albitized felsic dykes containing 1% disseminated pyrite.

 

O3AL-20-290B intersected 1.9 g/t Au over 32.8 m associated to the Bulldog zone. The mineralization is related to altered wacke crosscut by an intermediate dyke and three albitized felsic dykes. The intermediate intrusion is strongly sheared and sericitized and contains 5% dismembered quartz veins with 2 to 5% pyrite and returned 6.4 g/t Au over 7.5 m. The three felsic dykes have anomalous gold values while the wacke surrounding those intrusions returned 3.2 g/t Au over 2.5 m and 5.7 g/t Au over 1.0 m.

 

O3AL-20-299C intersected 14.9 g/t Au over 0.5 m associated with a currently unassigned zone. Mineralization is within a granodiorite dyke containing up to 1% coarse grained pyrite.

 

O3AL-20-300 intersected 2.1 g/t Au over 1.8 m associated with the Bulldog zone. The mineralization consists of 1-2% fine to medium grained disseminated pyrite with traces of chalcopyrite and pyrrhotite within a moderately sericitized and carbonated wacke.

 

Figure 1: Alpha Property Map is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/93f80478-0b94-45ff-953c-a3889e2889c6

 

Figure 2: Alpha Property Drilling is available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/0658e10f-c833-4cdd-9187-9d522a13b086

 

Qualified Person

 

The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Sébastien Vigneau. (OGQ #993), Exploration Manager, who is a “qualified person” as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.

 

Quality Control and Reporting Protocols

 

True width determination is currently unknown but is estimated at 65-80% of the reported core length interval for the zones. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Half-core samples are shipped to Agat laboratory in Val D’Or, Quebec and Mississauga, Ontario for assaying. The core is crushed to 75% passing -2 mm (10 mesh), a 250 g split of this material is pulverized to 85% passing 75 microns (200 mesh) and 50 g is analyzed by Fire Assay (FA) with an Atomic Absorption Spectrometry (AAS) finish. Samples assaying >10.0 g/t Au are re-analyzed with a gravimetric finish using a 50 g charge. Commercial certified standard material and blanks are systematically inserted by O3 Mining’s geologists into the sample chain after every 18 core samples as part of the QA/QC program. Third-party assays are submitted to other designated laboratories for 5% of all samples. Drill program design, Quality Assurance/Quality Control and interpretation of results are performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices.

 

About O3 Mining Inc.

 

O3 Mining, an Osisko group of companies, is an emerging consolidator of exploration properties in prospective gold camps in Canada – focused on projects in Quebec and Ontario – with a goal of becoming a multi-million ounce, high-growth company. The Corporation’s goal is to become one of the premier gold exploration companies in Canada.

 

O3 Mining is well-capitalized and holds a 100% interest in a number of properties in Quebec (435,000 hectares) and Ontario (25,000 hectares). O3 Mining controls 61,000 hectares in Val D’Or and over 50 kilometres of strike length of the Cadillac-Larder Lake Faut. O3 Mining also has a portfolio of assets in the James Bay and Chibougamau regions of Quebec and in the Hemlo district in Ontario.

 

Posted March 12, 2020

Share this news article

MORE or "UNCATEGORIZED"


GOLD LINE DRILLS 14.55 METRES OF 2.44 g/t GOLD AT PAUBÄCKEN, INCLUDING 0.85 METRES OF 9.60 g/t GOLD AND 1.10 METRES OF 9.41 g/t GOLD

Gold Line Resources Ltd. (TSX-V: GLDL)  is pleased to announce i... READ MORE

November 24, 2022

Azucar Reports Drilling Results from Lithocap Target, El Cobre Project, Mexico

Azucar Minerals Ltd. (TSX-V: AMZ) (OTCQB: AXDDF) is pleased to an... READ MORE

November 24, 2022

SOMA GOLD RELEASES 2022 Q3 RESULTS

Soma Gold Corp. (TSX-V: SOMA) (WKN: A2P4DU) (OTC: SMAGF) s please... READ MORE

November 24, 2022

Filo Mining Reports 1,356m at 1.09% CuEq, including 424m at 1.54% CuEq

Filo Mining Corp. (TSX: FIL) (Nasdaq First North Growth Market: F... READ MORE

November 24, 2022

Patagonia Gold Quarter 3 2022 Financial Results

Patagonia Gold Corp. (TSX-V: PGDC) announces its financial result... READ MORE

November 24, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News