
Highlights:
Northern Vertex Mining Corp. (TSX-V: NEE) (OTC Nasdaq Intl.: NHVCF) is pleased to announce recent drill results from its multi-phase drilling and resource expansion program at the Moss Mine in NW Arizona. The most notable results are set out above and are taken from 37 new reverse circulation drill holes from the Ruth vein area, which hosts multiple high-grade zones within larger zones of typical Moss Mine bulk-tonnage grade mineralization along the Ruth vein. Three rigs (1 core and two RC) are currently operating within the Company’s Phase II of a multi-phase drill program and the program will transition to target the intersection between the Ruth vein and the Moss vein in the coming months.
Ken Berry, President & CEO stated: “We are pleased to report another round of drilling results, including new high-grade intercepts along with thick low-grade zones, from our resource expansion drill program at the Moss Mine. Drilling at the Ruth Vein, which runs parallel to our Moss Open Pit, continues to encounter encouraging drill intercepts. The Ruth is located just 160 meters off the southern edge of our open pit mine and dips north toward the Moss Vein, which dips to the south, with the two veins intersecting at a contact zone approximately 225 meters below surface. This Ruth/Moss Contact Zone is a prime geological drill target for our ongoing resource expansion program at the Moss Mine.”
Ruth Vein Highlights
Definition drilling along the Ruth vein shows a strike length of greater than 500 meters with multiple high-grade zones intersected. Click the link to view a plan map showing drill-hole locations at the Ruth Vein (figure 1).
The latest intercept comes from hole AR20-350R, which was drilled within 15 meters of the active Center pit crest and returned 15.25 meters @ 3.35 gpt gold and 23.09 gpt silver, within 33.55 meters @ 1.83 gpt gold and 13.49 gpt silver (true thickness approximately 21.3 meters). Also, drill holes AR20-322R (183 meters east of AR20-350R) and AR20-321R (457 meters east of AR20-350R) intercepted zones of high-grade gold and silver including:
AR20-350R specifically targeted the Ruth vein, while hole AR20-355R, drilled from the same platform, targeted the intersection between the Ruth and Moss veins. Click the link to view a cross section of hole AR20-350R (figure 2). Samples from hole AR20-355R are in preparation at Skyline Laboratories and assay results are pending. During this drill program, high-grade (>3.0 gpt gold) zones have been intersected in 14 different drills holes along the 500 meters of defined Ruth vein strike length, confirming that the Ruth vein hosts multiple high-grade zones.
The drilling program continues with two reverse circulation drill rigs and one core drill rig in-filling along the Ruth vein. In the coming months, mining will transition from the Center pit to the West and East pits.
Ruth Vein Detailed Drill Results
Hole ID | Azimuth | Dip | From (m) | To (m) | From (ft) | To (ft) | Length (m) | Length (ft) | Au (g/t) | Ag (g/t) | ||||
AR20-308R | 180 | -85 | 0.00 | 3.05 | 0 | 10 | 3.05 | 10 | 0.435 | 2.6 | ||||
and | 131.15 | 135.73 | 430 | 445 | 4.57 | 15 | 0.654 | 5.8 | ||||||
and | 157.08 | 160.13 | 515 | 525 | 3.05 | 10 | 0.645 | 13.6 | ||||||
and | 172.33 | 201.30 | 565 | 660 | 28.98 | 95 | 0.396 | 8.363 | ||||||
and | 218.08 | 222.65 | 715 | 730 | 4.58 | 15 | 0.419 | 25.6 | ||||||
and | 276.03 | 279.08 | 905 | 915 | 3.05 | 10 | 0.636 | 5.1 | ||||||
AR20-309R | 195 | -88 | 86.93 | 93.03 | 285 | 305 | 6.10 | 20 | 1.131 | 11.375 | ||||
and | 106.75 | 112.85 | 350 | 370 | 6.10 | 20 | 0.232 | 3.15 | ||||||
and | 126.58 | 131.15 | 415 | 430 | 4.58 | 15 | 0.417 | 2.8 | ||||||
and | 138.78 | 143.35 | 455 | 470 | 4.57 | 15 | 0.275 | 1.9 | ||||||
and | 157.08 | 164.70 | 515 | 540 | 7.63 | 25 | 0.266 | 1.62 | ||||||
and | 172.33 | 175.38 | 565 | 575 | 3.05 | 10 | 0.361 | 0.6 | ||||||
AR20-319R | No significant results | |||||||||||||
AR20-320R | No significant results | |||||||||||||
AR20-321R | 180 | -85 | 125.05 | 129.63 | 410 | 425 | 4.58 | 15 | 0.249 | 0.767 | ||||
and | 201.30 | 211.98 | 660 | 695 | 10.68 | 35 | 1.369 | 20.814 | ||||||
including | 205.9 | 208.9 | 675 | 685 | 3.0 | 10 | 3.82 | 56.00 | ||||||
and | 222.7 | 227.2 | 730 | 745 | 4.6 | 15 | 1.08 | 22.67 | ||||||
AR20-322R | 180 | -88 | 54.9 | 83.9 | 180 | 275 | 29.0 | 95 | 0.75 | 7.15 | ||||
including | 68.6 | 70.2 | 225 | 230 | 1.5 | 5 | 8.74 | 80.10 | ||||||
AR20-323R | No significant results | |||||||||||||
AR20-324R | No significant results | |||||||||||||
AR20-325R | No significant results | |||||||||||||
AR20-326R | No significant results | |||||||||||||
AR20-327R | 180 | -85 | 143.4 | 146.4 | 470 | 480 | 3.1 | 10 | 0.44 | 0.95 | ||||
AR20-328R | 180 | -65 | 0.0 | 3.1 | 0 | 10 | 3.1 | 10 | 0.52 | 4.75 | ||||
and | 35.1 | 41.2 | 115 | 135 | 6.1 | 20 | 0.52 | 0.18 | ||||||
and | 47.3 | 51.9 | 155 | 170 | 4.6 | 15 | 0.29 | 0.70 | ||||||
AR20-329R | 180 | -85 | 0.00 | 12.20 | 0 | 40 | 12.20 | 40 | 0.27 | 3.18 | ||||
and | 54.90 | 56.43 | 180 | 185 | 1.53 | 5 | 1.40 | 5.80 | ||||||
AR20-330R | No significant results | |||||||||||||
AR20-331R | 150 | -45 | 16.78 | 25.93 | 55 | 85 | 9.15 | 30 | 0.23 | 2.13 | ||||
and | 38.13 | 44.23 | 125 | 145 | 6.10 | 20 | 0.52 | 12.78 | ||||||
AR20-332R | 230 | -65 | 10.68 | 15.25 | 35 | 50 | 4.58 | 15 | 0.81 | 7.43 | ||||
AR20-333R | 180 | -85 | 0.0 | 4.6 | 0 | 15 | 4.6 | 15 | 1.01 | 10.60 | ||||
and | 18.30 | 30.50 | 60 | 100 | 12.20 | 40 | 0.31 | 9.04 | ||||||
and | 39.65 | 57.95 | 130 | 190 | 18.30 | 60 | 0.60 | 2.56 | ||||||
including | 39.65 | 48.80 | 130 | 160 | 9.15 | 30 | 0.94 | 2.08 | ||||||
and | 71.68 | 79.30 | 235 | 260 | 7.63 | 25 | 0.26 | 1.94 | ||||||
and | 97.60 | 102.18 | 320 | 335 | 4.58 | 15 | 0.39 | 5.93 | ||||||
and | 117.43 | 122.00 | 385 | 400 | 4.58 | 15 | 0.26 | 3.47 | ||||||
AR20-334R | 140 | -70 | 10.68 | 25.93 | 35 | 85 | 15.25 | 50 | 0.72 | 7.04 | ||||
including | 15.25 | 16.78 | 50 | 55 | 1.53 | 5 | 3.30 | 28.60 | ||||||
and | 70.15 | 82.35 | 230 | 270 | 12.20 | 40 | 0.35 | 5.75 | ||||||
and | 93.03 | 105.23 | 305 | 345 | 12.20 | 40 | 0.55 | 3.59 | ||||||
AR20-335R | No significant results | |||||||||||||
AR20-336R | No significant results | |||||||||||||
AR20-337R | 180 | -85 | 123.53 | 131.15 | 405 | 430 | 7.63 | 25 | 1.16 | 2.66 | ||||
AR20-338R | 165 | -45 | 67.10 | 70.15 | 220 | 230 | 3.05 | 10 | 0.57 | 2.25 | ||||
AR20-339R | No significant results | |||||||||||||
AR20-340R | 120 | -80 | 117.43 | 129.63 | 385 | 425 | 12.20 | 40 | 0.78 | 5.51 | ||||
AR20-341R | 180 | -45 | 0.00 | 10.68 | 0 | 35 | 10.68 | 35 | 0.29 | 2.97 | ||||
AR20-342R | No significant results | |||||||||||||
AR20-343R | No significant results | |||||||||||||
AR20-344R | No significant results | |||||||||||||
AR20-345R | 250 | -70 | 42.70 | 45.75 | 140 | 150 | 3.05 | 10 | 0.42 | 0.65 | ||||
AR20-346R | No significant results | |||||||||||||
AR20-347R | 180 | -88 | 51.85 | 74.73 | 170 | 245 | 22.88 | 75 | 0.24 | 3.39 | ||||
including | 56.43 | 57.95 | 185 | 190 | 1.53 | 5 | 1.00 | 5.10 | ||||||
AR20-348R | 0 | -45 | 6.10 | 24.40 | 20 | 80 | 18.30 | 60 | 0.41 | 2.26 | ||||
35.08 | 42.70 | 115 | 140 | 7.63 | 25 | 0.40 | 2.60 | |||||||
59.48 | 65.58 | 195 | 215 | 6.10 | 20 | 0.26 | 8.25 | |||||||
184.53 | 201.30 | 605 | 660 | 16.78 | 55 | 0.24 | 0.86 | |||||||
and | 218.08 | 231.80 | 715 | 760 | 13.73 | 45 | 0.44 | 4.66 | ||||||
including | 219.60 | 222.65 | 720 | 730 | 3.05 | 10 | 1.08 | 15.55 | ||||||
AR20-349R | No significant results | |||||||||||||
AR20-350R | 205 | -85 | 102.18 | 108.28 | 335 | 355 | 6.10 | 20 | 0.27 | 2.48 | ||||
and | 125.05 | 158.60 | 410 | 520 | 33.55 | 110 | 1.83 | 13.49 | ||||||
including | 128.10 | 143.35 | 420 | 470 | 15.25 | 50 | 3.35 | 23.09 | ||||||
AR20-351R | 205 | -70 | 0.00 | 3.05 | 0 | 10 | 3.05 | 10 | 0.42 | 2.25 | ||||
and | 106.75 | 123.53 | 350 | 405 | 16.78 | 55 | 0.23 | 1.21 | ||||||
AR20-353R | 230 | -45 | 0.00 | 4.58 | 0 | 15 | 4.58 | 15 | 0.32 | 1.67 | ||||
and | 13.73 | 16.78 | 45 | 55 | 3.05 | 10 | 0.35 | 1.45 | ||||||
and | 89.98 | 93.03 | 295 | 305 | 3.05 | 10 | 0.29 | 0.60 | ||||||
and | 106.75 | 112.85 | 350 | 370 | 6.10 | 20 | 0.32 | 0.93 | ||||||
and | 143.35 | 146.40 | 470 | 480 | 3.05 | 10 | 0.37 | 9.80 | ||||||
AR20-354R | 10 | -80 | 193.68 | 219.60 | 635 | 720 | 25.93 | 85 | 0.37 | 4.26 | ||||
* Note: estimated true widths range from 65 to 90% depending on dip of the vein and inclination of the drill-hole |
QA/QC
Samples of drill cuttings were collected by the drilling crew using a wet rotary splitter to ensure a representative sample of each five-foot interval. Field notes were recorded for each sample documenting what was sampled and how the sample was taken. Samples were collected in bags with a sample tag inserted and delivered to a secure on-site location prior to pick-up by Skyline Labs, a commercial laboratory in Tucson, Arizona. Skyline Labs is an ISO 9001:2008 qualified assay lab that uses and makes available internal assaying controls. Quality control consisted of one certified gold standard, one blank, and one duplicate sample inserted into every twenty samples submitted to Skyline Laboratories.
At the lab, rock samples are dried, crushed and pulverized to 85% passing through a 200-mesh sieve. The pulps are assayed for gold using a 30 g split, Fire Assay and Atomic Absorption finish. Over limit assays for both gold and silver (10 gpt for gold and 100 gpt for silver) were rerun using a gravimetric procedure. Rejects and pulps are stored at Golden Vertex’s warehouse in Bullhead City for future reference.
Qualified Person
The foregoing technical information contained in this news release has also been reviewed and verified by Mr. Joseph Bardswich, P.Eng., a director of the Company and a Qualified Person for the purpose of National Instrument 43-101 (Disclosure Standards for Mineral Projects).
About Northern Vertex Mining Corp.
Northern Vertex Mining Corp. is focused on low cost gold and silver production at its 100% owned Moss Mine in NW Arizona. The Company has experience across all areas of operations, mine development, exploration, acquisitions, and financing of mining projects. With operations at the flagship Moss Mine achieving commercial production the Company intends to consolidate additional producing or near-term production gold assets within the Western US. Through mergers and acquisitions Northern Vertex’s corporate goal is to become a mid-tier gold producer.
Moss Mine and Ruth Vein Plan Map and Long-section (CNW Group/Northern Vertex Mining Corp.)
American Lithium Corp. (TSX-V:LI) (NASDAQ:AML) (Frankfurt:5LA1) a... READ MORE
Treasury Metals Inc. (TSX: TML) (OTCQX: TSRMF) is pleased to anno... READ MORE
Results continue to confirm the existence and continuity o... READ MORE
Adventus Mining Corporation (TSX-V: ADZN) (OTCQX: ADVZF) and Salazar Res... READ MORE
Madison Metals Inc. (CSE: GREN) (OTCQB: MMTLF) is pleased to anno... READ MORE