
NexMetals Mining Corp. (TSX-V: NEXM) (NASDAQ: NEXM) is pleased to report assay results from drill holes SMD-26-217 and SMD-26-216-W1, part of its ongoing surface drilling program at the Selebi Main deposit in Botswana (see Figure 1). The results indicate a newly encountered third mineralized zone below the Lower Zone and extension of the interpreted high-grade trend by approximately 100 metres toward Selebi North, bringing its interpreted length to approximately 1.5 kilometres.
SMD-26-217 intersected three distinct mineralized zones. The Main Zone returned 3.15 metres grading 3.14% Cu and 0.86% Ni. The Lower Zone returned 6.60 metres grading 1.35% Cu and 1.95% Ni including 4.25 metres grading 1.33% Cu and 2.37% Ni. The newly encountered Third Zone returned 6.30 metres grading 2.67% Cu and 1.85% Ni, including 4.30 metres grading 2.98% Cu and 2.38% Ni, with higher copper grades than those of the Lower Zone potentially indicating greater remobilization.
SMD-26-216-W1 was an in-fill hole testing a sparsely drilled area approximately 165 metres north of the High-Grade Trend. The hole intersected 1.00 metre grading 2.98% Cu and 1.07% Ni corresponding to the Main Zone and a Lower Zone interval of 3.45 metres grading 2.86% Cu and 1.52% Ni, including 1.45 metres grading 3.61% Cu and 1.94% Ni. SMD-26-216-W1 infills a gap within the resource model on the northern side of the mineralized trend and supports the interpreted consistency of the High-Grade Trend and lateral continuity of the mineralized zones.
Why This Matters
Sean Whiteford, CEO and Director of the Company, commented: “Our first intersection of the Third Zone returned strong copper and nickel grades below the Lower Zone, providing an additional target for follow-up drilling. Building on the recent 72% increase in Selebi Main’s Inferred Mineral Resource to 32.47 million tonnes grading 1.53% copper and 0.97% nickel, these results point to further growth potential as we continue to test the limits of the deposit. SMD-26-217 extends the interpreted High-Grade Trend toward Selebi North, while SMD-26-216-W1 supports potential lateral continuity. We are advancing technical and trade-off studies to support the preliminary economic assessment, while continuing exploration drilling to test the open system.”

Figure 1: Inclined long section of Selebi Main highlighting the location of drill holes SMD-26-217 and SMD-26-216-W1. The 2026 Inferred Mineral Resource reference in Figure 1 is presented in accordance with NI 43-101, which may not be identical to Inferred Mineral Resource references under Subpart 1300 of Regulation SK.
Table 1: 2026 Surface Drilling Results SMD-26-216-W1 and SMD-26-217
| Hole-ID | From (m) |
To (m) |
Length (m) |
Est. True Thickness1 |
Cu (%) |
Ni (%) |
Co (%) |
Zone |
| SMD-26-216-W1 | 1624.10 | 1625.10 | 1.00 | 0.99 | 2.98 | 1.07 | 0.04 | Main Zone |
| SMD-26-216-W1 | 1683.35 | 1686.80 | 3.45 | 3.40 | 2.86 | 1.52 | 0.06 | Lower Zone |
| including | 1685.35 | 1686.80 | 1.45 | 1.43 | 3.61 | 1.94 | 0.08 | |
| SMD-26-217 | 1931.85 | 1935.00 | 3.15 | 3.11 | 3.14 | 0.86 | 0.04 | Main Zone |
| including | 1931.85 | 1933.80 | 1.95 | 1.93 | 3.36 | 1.28 | 0.06 | |
| SMD-26-217 | 1974.75 | 1981.35 | 6.60 | 6.52 | 1.35 | 1.95 | 0.06 | Lower Zone |
| including | 1974.75 | 1979.00 | 4.25 | 4.20 | 1.33 | 2.37 | 0.11 | |
| SMD-26-217 | 1994.60 | 2000.90 | 6.30 | 6.22 | 2.67 | 1.85 | 0.09 | Third Zone |
| including | 1996.60 | 2000.90 | 4.30 | 4.25 | 2.98 | 2.38 | 0.11 |
1Length refers to drillhole length and not true width. True widths are estimated where density of drilling is sufficient for an estimation.
To view core photos from drill hole SMD-26-217, click here: Selebi Core Samples – NexMetals Mining Corp.
Table 2: Surface Drilling Collar Information
| Hole-ID | UTM East | UTM North | Elevation | Dip | True North Azimuth | Hole Length (m) |
Comment |
| SMD-26-216-W1 | 582793.8 | 7563698.8 | 902.0 | -73.0 | 105.4 | 1763.6 | Surveyed collar |
| SMD-26-217 | 582546.8 | 7564008.6 | 906.0 | -73.9 | 92.7 | 2050.9 | Surveyed collar |
Qualified Person
All scientific and technical information in this news release has been reviewed and approved by Sharon Taylor, V.P. Geophysics of the Company, MSc, P.Geo, and a “qualified person” for the purposes of National Instrument 43-101 and Subpart 1300 of Regulation S-K.
Quality Control and Data Verification
The program is being executed using three Company-owned underground Zinex U5 drills which were converted into surface A5 drills, and two Marcotte HTM2500 drills purchased by the Company capable of drilling to depths of 2,550 metres (NQ core).
Drill core samples are either NQ (47.75 mm diameter) or BQ (36.40 mm diameter). All samples are ½ core samples cut by a diamond saw on site and the remaining half of the core is retained for reference purposes. Samples are generally 1.0 to 1.5 metre intervals or less at the discretion of the site geologists. Sample preparation and lab analysis were completed at ALS Geochemistry in Johannesburg, South Africa. Commercially prepared blank samples and certified Cu/Ni sulphide analytical control standards with a range of grades are inserted in every batch of 20 samples or a minimum of one set per sample batch. Analyses for Ni, Cu and Co are completed using a peroxide fusion preparation and ICP-AES finish (ME-ICP81). Analyses for Pt, Pd, and Au are by fire assay (30 grams nominal sample weight) with an ICP-AES finish (PGM-ICP23).
Holes are numbered as follows: SMD (Selebi Main Deposit) + year + hole number starting at 201.
The Qualified Person has verified the data disclosed in this news release, including the sampling, analytical and test data underlying the information, through contribution to the core handling and sampling procedures, visits to the drill and core processing facilities, monitoring of core logging results and sample selection, review of core assay and QA/QC results.
For further information regarding the effective date of the 2026 Inferred Mineral Resource Estimate at Selebi Main and the key assumptions, parameters and methods used in its estimation, please refer to the technical report comprising the estimates for the Selebi Main and Selebi North deposits entitled “NI 43-101 Technical Report – October 2026 Mineral Resource Estimate, Selebi Mines Copper-Nickel-Cobalt Project, Botswana“, prepared by The MSA Group (Pty) Ltd. with an effective date of October 16, 2026. The technical report has been filed under the Company’s profile on SEDAR+ at www.sedarplus.ca, furnished under the Company’s profile on EDGAR at www.sec.gov and is also available on the Company’s website. The Company has also filed a related Regulation S-K 1300-compliant technical report summary as an exhibit to its Quarterly Report on Form 10-Q for the period ended September 30, 2026.
BHEM Surveys
The BHEM surveys at Selebi utilize the Crone PEM system operated by local Botswana staff. Survey data is collected using a 3-component fluxgate probe collecting full waveform data. Surveys have been collected using timebases between 50 and 1000ms (0.25 Hz to 5 Hz). The data has been processed to a calculated residual step response to better quantify the conductive sources. This added processing has proven to be highly valuable because of the size of the highly conductive mineralized system.
About NexMetals Mining Corp.
NexMetals Mining Corp. is a TSX.V and NASDAQ listed mineral exploration and development company focused on redeveloping the past-producing Selebi copper-nickel-cobalt mines in Botswana and the Selkirk copper-nickel-cobalt-platinum group element mines in Botswana. NexMetals has confirmed the scale of mineralization is larger than historical estimates, supported by NI 43-101 and Regulation S-K 1300-compliant resource estimates, with ongoing down-hole geophysics, drilling, and metallurgical programs aimed at expanding resources and supporting future economic studies. The Company is led by an experienced management and technical team with a proven track record in global mineral projects, emphasizing disciplined execution, transparent governance, and long-term stakeholder value creation.
PE-26-042 INTERSECTS 2.92 g/t over 7.30 m (70.00 m to 77.30 m) In... READ MORE
Carlin Gold Corporation (TSX-V: CGD) (OTCQB: CGDCF) (FSE: YG20)Â... READ MORE
Final assays from 2026 RC Program Continue to Expand Deposit̵... READ MORE
Cabral Gold Inc. (TSX-V: CBR) (OTCQX: CBGZF) is pleased to announ... READ MORE