New Found Gold Corp. (TSX-V: NFG) (NYSE-A: NFGC) is pleased to announce the results from thirty-six diamond drill holes that were completed as part of an ongoing systematic drill program exploring a highly prospective segment of the Appleton Fault Zone immediately north of the Keats Zone. New Found’s 100%-owned Queensway project comprises a 1,650km2 area, accessible via the Trans-Canada Highway, 15km west of Gander, Newfoundland and Labrador.
Keats North Highlights:
|Hole No.||From (m)||To (m)||Interval (m)1||Au (g/t)||Zone|
Table 1: Keats North Drilling Highlights
1Note that the host structures are interpreted to be steepling dipping and true widths are unknown at this time. Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional uncertainty in true width. Composite intervals reported carry a minimum weighted average of 1 g/t Au diluted over a minimum core length of 2m with a maximum of 2m consecutive dilution. Included high-grade intercepts are reported as any consecutive interval with grades greater than 10 g/t Au. Grades have not been capped in the averaging and intervals are reported as drill thickness.
Melissa Render, VP of Exploration for New Found stated: “As drilling progresses at Keats North, new domains of high-grade have been encountered in various locations throughout this stretch along the AFZ (Figure 3). The structure in this region is complex but with additional drilling and new data points, the interpretation is evolving, and several high-grade targets have been identified for prompt follow-up. Both high- and low-grade results are mapping out a substantial domain of gold mineralization that we are keen to pursue. Given its proximity to the Keats-Baseline Fault and the connection via structure to the Keats Main Zone, we are very encouraged by the results reported to date and look forward to what the targeted follow-up programs have to bring.”
|Hole No.||From (m)||To (m)||Interval (m)1||Au (g/t)||Zone|
|NFGC-22-596||No Significant Values||Keats N|
|NFGC-22-613||No Significant Values||Keats N|
|NFGC-22-651||No Significant Values||Keats N|
|NFGC-22-652||No Significant Values||Keats N|
|NFGC-22-653||No Significant Values||Keats N|
|NFGC-22-682||No Significant Values||Keats N|
|NFGC-22-692||No Significant Values||Keats N|
|NFGC-22-736||No Significant Values||Keats N|
|NFGC-22-748||No Significant Values||Keats N|
|NFGC-22-754||No Significant Values||Keats W|
Table 2: Summary of composite results reported in this press release for Keats West
1Note that the host structures are interpreted to be steepling dipping and true widths are unknown at this time. Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional uncertainty in true width. Composite intervals reported carry a minimum weighted average of 1 g/t Au diluted over a minimum core length of 2m with a maximum of 2m consecutive dilution. Included high-grade intercepts are reported as any consecutive interval with grades greater than 10 g/t Au. Grades have not been capped in the averaging and intervals are reported as drill thickness. 2Previously reported interval.
|Hole No.||Azimuth (°)||Dip (°)||Length (m)||UTM E||UTM N|
Table 3: Details of the drill hole reported in this press release
Queensway 400,000m Drill Program Update
Approximately 79% of the planned 400,000m program at Queensway has been drilled to date with ~61,442m of the core still pending assay results.
Sampling, Sub-sampling, and Laboratory
True widths of the intercepts reported in this press release have yet to be determined and further exploration is required. Infill veining in secondary structures with multiple orientations crosscutting the primary host structures are commonly observed in drill core which could result in additional variability in true width. Assays are uncut, and composite intervals are calculated using a minimum weighted average of 1 g/t Au diluted over a minimum core length of 2m with a maximum of 2m consecutive dilution. Included high-grade intercepts are reported as any consecutive interval with grades greater than 10 g/t Au.
All drilling recovers HQ core. Drill core is split in half using a diamond saw or a hydraulic splitter for rare intersections with incompetent core.
A geologist examines the drill core and marks out the intervals to be sampled and the cutting line. Sample lengths are mostly 1.0 meter and adjusted to respect lithological and/or mineralogical contacts and isolate narrow (<1.0m) veins or other structures that may yield higher grades.
Technicians saw the core along the defined cutting line. One-half of the core is kept as a witness sample and the other half is submitted for analysis. Individual sample bags are sealed and placed into totes, sealed and marked with the contents.
NFG submits samples for gold determination by fire assay to ALS Canada Ltd.” and by photon assay to MSALABS since June 2022. ALS and MSA operate under a commercial contract with New Found.
Drill core samples are shipped to ALS for sample preparation in Sudbury, Ontario, Thunder Bay, Ontario, or Moncton, New Brunswick. ALS is an ISO-17025 accredited laboratory for the fire assay method.
Drill core samples are also submitted to MSA in Val-d’Or, Quebec. MSA operates numerous laboratories worldwide and maintains ISO-17025 accreditation for many metal determination methods. Accreditation of the photon assay method at the MSA Val D’Or laboratory is in progress.
At ALS, the entire sample is crushed to approximately 70% passing 2mm. A 3,000-g split is pulverized. “Routine” samples do not have visible gold (VG) identified and are not within a mineralized zone. Routine samples are assayed for gold by 30-g fire assay with an inductively-couple plasma spectrometry (ICP) finish. If the initial 30-g fire assay gold result is over 1 g/t, the remainder of the 3,000-g split is screened at 106 microns for screened metallics assay. For the screened metallics assay, the entire coarse fraction (sized greater than 106 microns) is fire assayed and two splits of the fine fraction (sized less than 106 microns) are fire assayed. The three assays are combined on a weight-averaged basis. Samples that have VG identified or fall within a mineralized interval are automatically submitted for screened metallic assay for gold.
At MSA, the entire sample is crushed to approximately 70% passing 2mm. For “routine” samples that do not have VG identified and are not within a mineralized zone, the samples are riffle split to fill two 450g jars for photon assay. The assays reported from both jars are combined on a weight-averaged basis. If one of the jars assays greater than 1 g/t, the remaining crushed material is weighed into multiple jars and are submitted for photon assay.
For samples that have VG identified or are within a mineralized zone, the entire crushed sample is weighed into multiple jars and are submitted for photon assay. The assays from all jars are combined on a weight-averaged basis.
All samples prepared at ALS or MSA are also analyzed for a multi-element ICP package (ALS method code ME-ICP61) at ALS Vancouver.
Drill program design, Quality Assurance/Quality Control and interpretation of results are performed by qualified persons employing a rigorous Quality Assurance/Quality Control program consistent with industry best practices. Standards and blanks account for a minimum of 10% of the samples in addition to the laboratory’s internal quality assurance programs.
Quality Control data are evaluated on receipt from the laboratories for failures. Appropriate action is taken if assay results for standards and blanks fall outside allowed tolerances. All results stated have passed New Found’s quality control protocols.
New Found’s quality control program also includes submission of the second half of the core for approximately 5% of the drilled intervals. In addition, approximately 1% of sample pulps for mineralized samples are submitted for re-analysis to a second ISO-accredited laboratory for check assays.
The Company does not recognize any factors of drilling, sampling or recovery that could materially affect the accuracy or reliability of the assay data disclosed.
The assay data disclosed in this news release have been verified by the Company’s Qualified Person against the original assay certificates.
The Company notes that it has not completed any economic evaluations of its Queensway Project and that the Queensway Project does not have any resources or reserves.
The scientific and technical information disclosed in this press release was reviewed and approved by Greg Matheson, P. Geo., Chief Operating Officer, and a Qualified Person as defined under National Instrument 43-101. Mr. Matheson consents to the publication of this press release dated December 5, 2022, by New Found. Mr. Matheson certifies that this press release fairly and accurately represents the scientific and technical information that forms the basis for this press release.
About New Found Gold Corp.
New Found holds a 100% interest in the Queensway Project, located 15km west of Gander, Newfoundland and Labrador, and just 18km from Gander International Airport. The project is intersected by the Trans-Canada Highway and has logging roads crosscutting the project, high voltage electric power lines running through the project area, and easy access to a highly skilled workforce. The Company is currently undertaking a 400,000m drill program at Queensway, now approximately 79% complete. The Company is well funded for this program with cash and marketable securities of approximately $48 million as of December 2022.
Figure 1. Keats, Keats West, and Keats North inclined 3-D plan view map (Photo: Business Wire)
Figure 2: Photos of mineralization from: Left: at ~250m in NFGC-22-728, Right: at ~235m in NFGC-22-796 ^Note that these photos are not intended to be representative of gold mineralization in holes NFGC-22-728 and NFGC-22- 796. (Photo: Business Wire)
Figure 3. Keats – Lotto North plan view map (Photo: Business Wire)
Awalé Resources Limited (TSX-V: ARIC) a junior explorer focused ... READ MORE
Silver Hammer Mining Corp. (CSE: HAMR) is pleased to announce tha... READ MORE
Velocity Minerals Ltd. (TSX-V: VLC) has closed its previously ann... READ MORE
Sitka Gold Corp. (CSE: SIG) (FSE: 1RF) (OTCQB: SITKF) is pleased... READ MORE
Argonaut Gold Inc. (TSX: AR) is pleased to announce that it has c... READ MORE