The Prospector News

Moneta Intercepts 1.93 m @ 34.36 g/t Gold, 3.00 m @ 5.38 g/t Gold, and 3.00 m @ 5.73 g/t Gold At South West

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Moneta Intercepts 1.93 m @ 34.36 g/t Gold, 3.00 m @ 5.38 g/t Gold, and 3.00 m @ 5.73 g/t Gold At South West

 

 

 

 

 

Moneta Porcupine Mines Inc. (TSX:ME) (OTC:MPUCF) (XETRA:MOP) is pleased to announce the results from seven additional diamond drill holes completed on the South West Deposit located within the Company’s Golden Highway Project (located 110 km east of Timmins, Ontario, see Figure 1).

 

 

Highlights:

 

Step-out drilling at South West has continued to extend the strike and depth extent of the vein structures and extend the size of the mineralized shoots. One new vein, Walnut has been confirmed by drilling, increasing the total number of veins to seventeen.

 

 

Vein array

 

•     Cedar Vein Drill hole MGH17-081 confirmed the northern and up-dip extensions of the Cedar vein intersecting 1.93 metres (“m”) @ 34.36 grams per tonne gold (“g/t Au”) including 1.03 m @ 65.10 g/t Au
     
•   Birch Vein Birch was intersected in drill hole MGH17-081 returning 3.00 m @ 5.38 g/t Au extending the vein up-dip     
     
•     Walnut Vein Drill hole MGH17-083 intersected the new Walnut vein located 50 m west of Willow, assaying 3.00 m @ 5.73 g/t Au including 0.75 m @ 9.17 g/t Au extending the vein to depth by 100 m
     
•   Maple Vein MGH17-087 intersected Maple vein extending the vein by 50 m up-dip assaying 0.45 m @ 10.65 g/t Au
     
•    Pine Vein Drill hole MGH17-087 intersected 0.80 m @ 8.90 g/t Au extending Pine by ~50 m
     
•    

 

Spruce Vein Drill hole MGH17-087 intersected Spruce assaying 1.20 m @ 8.72 g/t Au confirming ~50 m up-dip extension

 

 

 

Mineralized Shoots

 

SW-1: Drill hole MGH17-084 intersected 15.00 m @ 1.76 g/t Au including 2.10 m @ 3.02 g/t Au confirming the shallow extensions of this shoot by 25 m to the south

 

 

 

Gary O’Connor, CEO & Chief Geologist commented, “We are extremely pleased to continue to expand the footprint of gold mineralization at South West and confirm another new vein, Walnut and extend the known seventeen vein structures to depth and to the south. Our new drilling and understanding of the vein structures gives us confidence that we can connect the veins from surface to the historical drilling to depths of 1,200 m. We also extended the size of one mineralized shoot, SW-1 with the current drilling. We are encouraged by the new results and plan to complete the logging and assaying of core from the expanded drill program at South West to continue to define a larger gold system, increase the number of veins and shoots, and confirm the higher grade mineralization.”

 

 

The latest assay results are from seven drill holes totalling 4,813.6 m of drilling at South West that continues to test the higher grade structural targets. The ongoing drill program at South West follows up on the previously announced exploration drill program undertaken by the Company in late 2017 and early 2018 on the Golden Highway Project and that was expanded to 41,100 m in 70 drill holes. Assays for additional drill holes are pending and will be released as they become available for the South West and “55” areas.

 

 

South West Deposit

 

Drilling to date at South West has been successful in confirming the existence of seventeen (17) stacked veins and eight (8) mineralized shoots. The veins trend NW as stacked veins, steeply dipping to the SW at 70°, and occur south of the Banded Iron Formation (“BIF”) within clastic Timiskaming age sediments. A new vein, Walnut, the seventeenth identified to date was confirmed in the current drilling. The first six modelled veins have an average width of approximately 2.90 m and are spaced 25 m to 30 m apart. The vein structures can be traced now for over 400 m strike length and have been historically drilled to depths of up to 1,200 m and remain open but appear to narrow to the south.

 

 

The sheared contact with the BIF hosts mineralized stockwork zones (“shoots”) which plunge ~65° to ~75° to the west and occur up to 50 m long, 25 m wide and have been confirmed to depths of over 800 m. A total of eight shoots have now been identified.

 

 

The veins and stock-work style veining within the shoots occur as quartz-carbonate-pyrite veins within an ankerite alteration halo occasionally associated with sericite. A zone of pyrite-chlorite and quartz veinlets occur within the vein corridors and also host mineralization. The veins can be brecciated and occur as quartz matrix supported breccia zones. The eight (8) mineralized shoots and seventeen (17) vein corridors have now been successfully traced across a width of 1,200 m.

 

 

South West Drill Results

 

Drill hole MGH17-081 was drilled to test the up-dip and northern extensions of the six initial modelled veins. The drill hole intersected the Tamarack (2.60 m @ 2.06 g/t Au), Elm (1.00 m @ 5.15 g/t Au), Birch (3.00 m @ 5.38 g/t Au, including 1.00 m @ 8.28 g/t Au), Balsam (1.00 m @ 3.50 g/t Au), Cedar (1.93 m @ 34.36 g/t Au including 1.03 m @ 65.10 g/t Au), and Pine (1.08 m @ 5.18 g/t Au). The drill hole added up to 50 m to the vein extensions.

 

 

Drill hole MGH17-082 was drilled to test the Walnut, Willow and Arbutus veins to the south and intersected the Willow vein at 465.40 m depth assaying 0.30 m @ 2.21 g/t Au extending the vein by 50 m. The drill hole did also confirm the Redwood and Alder vein structures. The drill hole was drilled to the south of the SW-3 mineralized shoots and confirmed that the mineralization is not continuous along the BIF contact.   

 

 

Drill hole MGH17-083 was also drilled to test the BIF contact south of SW-3 and the Maple, Oak, Alder vein structures at depth as well as the new Walnut vein, located ~50 m west of Willow. The drill hole intersected Maple at 444.67 m (1.80 m @ 1.53 g/t Au) and the Walnut vein structure at 697.50 m assaying 3.00 m @ 5.73 g/t Au including 0.75 m @ 9.17 g/t Au extending this vein by 50 m to the south and 100 m depth. The BIF contact south of SW-3 was confirmed not to host mineralization.

 

 

Drill hole MGH18-084 was drilled to test the west veins and the southern and depth extensions of the main veins by 100 m as well as the southern extensions of the SW-1 shoot near the Main Fault. The drill hole intersected the West veins (1.10 m @ 2.58 g/t Au) and a 25 m southern step out of the SW-1 shoot (15.00 m @ 1.76 g/t Au at 447.50 m depth). The holes also confirmed up to 100 m extensions of the Tamarack (0.61 m @ 3.28 g/t Au), Cedar (1.00 m @ 5.89 g/t Au), Pine (0.65 m @ 8.37 g/t Au) and the Spruce vein structure (2.50 m @ 3.62 g/t Au including 1.00 m @ 6.59 g/t Au).  

 

 

Diamond drill holes MGH18-085 and MGH18-086 were drilled to test additional 100 m extensions of the main veins to the south and confirmed the extensions of the Tamarack (2.90 m @ 2.60 g/t Au) and Spruce vein structures (0.80 m @ 3.96 g/t Au). The veins structures were intersected to the south but appear to narrow.

 

 

Drill hole MGH17-087 was drilled to confirm the main veins and test the depth and southern extensions of the Maple, Oak and Alder veins. The drill holes confirmed the main Elm (2.00m @ 2.79 g/t Au), Birch, Balsam (1.25 m @ 5.27 g/t Au), Pine (0.50 m @ 10.75 g/t Au) and Spruce (1.20 m @ 8.72 g/t Au) vein structures. MGH18-087 confirmed the Maple (0.45 m @ 10.65 g/t Au), Oak (0.70 m @ 3.81 g/t Au) and the Alder (2.00 m @ 2.00 g/t Au at 575.00 m) vein structures at depth and with up to 50 m step outs to the south.

 

 

Please click below for Figure 1 – South West Location Map- Golden Highway Project:


http://www.monetaporcupine.com/i/maps/ME-PR-11-2018-2.jpg

 

 

Please click below for Figure 2 – South West: Geology and Drill Location Map


http://www.monetaporcupine.com/i/maps/ME-PR-11-2018-3.jpg

 

 

Please click below for Figure 3 – South West: Schematic Cross Section


http://www.monetaporcupine.com/i/maps/ME-PR-11-2018-4.jpg

 

 

 Table 1: South West: Selective Significant Drill Results

 

 

 

Hole From To Length Au Vein
# (m) (m) (m) (g/t) #
MGH18-081 53.40 56.00 2.60 2.06 Tamarack
MGH17-081 95.00 96.00 1.00 5.15 Elm
MGH17-081 175.00 183.00 8.00 2.43* Birch
includes 177.00 180.00 3.00 5.38 Birch
includes 177.00 178.00 1.00 8.28 Birch
MGH17-081 214.00 215.00 1.00 3.50 Balsam
MGH17-081 266.10 268.03 1.93 34.36 Cedar
includes 267.00 268.03 1.03 65.10 Cedar
MGH17-081 283.50 285.50 2.00 4.30 Cedar Splay
includes 284.50 285.50 1.00 6.80 Cedar Splay
MGH17-081 306.92 308.00 1.08 5.18 Pine
MGH17-083 83.68 85.53 1.85 2.24 Main Fault
MGH17-083 345.77 346.52 0.75 3.12 New
MGH17-083 697.50 707.62 10.12 2.80 Walnut
includes 697.50 700.50 3.00 5.73 Walnut
includes 699.00 699.75 0.75 9.17 Walnut
MGH18-084 342.80 343.90 1.10 2.58 West Vein
MGH18-084 374.95 375.56 0.61 3.28 Tamarack
MGH18-084 447.50 462.50 15.00 1.76* SW-1
includes 448.90 451.00 2.10 3.02 SW-1
MGH18-084 528.00 529.00 1.00 5.89 Cedar
MGH17-084 600.35 601.00 0.65 8.37 Pine
MGH18-084 625.00 627.50 2.50 3.62 Spruce
includes 625.00 626.00 1.00 6.59 Spruce
MGH18-085 446.00 448.90 2.90 2.60 Tamarack
includes 447.00 447.50 0.50 7.32 Tamarack
MGH18-085 811.50 812.30 0.80 3.96 Spruce
MGH18-087 99.00 101.00 2.00 2.79* Elm
includes 100.00 101.00 1.00 3.70 Elm
MGH18-087 111.46 112.36 0.90 6.40 New
MGH18-087 134.36 136.53 2.17 1.71* Birch
MGH18-087 195.00 196.25 1.25 5.27 Balsam
MGH18-087 309.82 310.62 0.80 8.90 Pine
includes 309.82 310.32 0.50 10.75 Pine
MGH18-087 322.91 323.21 0.30 15.55 New
MGH18-087 343.30 344.50 1.20 8.72 Spruce
MGH18-087 390.55 391.00 0.45 10.65 Maple
MGH18-087 561.00 563.70 2.70 1.88* Oak
includes 563.00 563.70 0.70 3.81 Oak

 

 

Intercepts are calculated using a 2.0 g/t Au cut-off, maximum of 2m internal waste and no top cap, unless noted (*). All intercepts are reported as drill widths and estimated to be 65% to 100% of true widths.

 

 

Table 2: Drill Hole Details

 

 

Hole Easting Northing Elevation Azimuth Inclination Depth
# mE mN masl ° ° m
MGH17-081 571001 5369339 323 90 -51 528.0
MGH17-082 571050 5369558 324 90 -55 696.0
MGH17-083 570848 5369500 322 90 -50 737.8
MGH18-084 570766 5369256 321 90 -67 848.4
MGH18-085 570701 5369147 321 90 -60 812.3
MGH18-086 571055 5369139 324 90 -51 600.0
MGH18-087 570960 5369371 323 90 -50 591.1

 

QA/QC Procedures

 

All core drilling conducted by Moneta is oriented. Drill core is sawn and half is sent ALS Canada Inc. for drying and crushing to -2 mm, with a 1.00 kg split pulverized to -75 µm (200#). A 50 g charge is Fire Assayed and analyzed using a AAS finish for Gold. Samples above 10.00 g/t Au are analyzed by Fire Assay with a gravimetric finish and selected samples with visible gold or high-grade mineralization are assayed by Metallic Screen Fire Assay on a 1.00 kg sample. Moneta inserts independent certified reference material and blanks with the samples and assays routine pulp repeats and coarse reject sample duplicates with the samples, as well as completing third-party check assays at Activation Laboratories Ltd. Gary O’Connor, MAusIMM is a qualified person under NI 43-101 and has reviewed and approved the contents of this press release.  

 

 

About Moneta

 

The Company holds a 100% interest in 5 core gold projects strategically located along the Destor-Porcupine Fault Zone in the Timmins Gold Camp with over 85 million ounces of past gold production. The projects consist of the Golden Highway, North Tisdale, Nighthawk Lake, Kayorum and Denton projects. The Golden Highway Project covers 12 kilometres of prospective ultramafic/mafic volcanic/sedimentary rocks along the DPFZ hosting a NI 43-101 indicated resource estimate of 1,091,000 ounces (31.1 Mt at 1.09 g/t Au) and 3,204,000 ounces inferred (83.3 Mt at 1.20 g/t Au), clustered within four kilometres.

 

Posted June 21, 2018

Share this news article

MORE or "UNCATEGORIZED"


Arizona Silver Extends High Grade Zone at Philadelphia Project

Drills 2.26 Metres at 11.81 gpt Gold And 39.31 gpt Silver within ... READ MORE

May 25, 2022

LAURION Intersects 6.72m True Width* at 0.62 g/t Au and 3.05% Zn as part of a 65m thick mineralized zone in the Newly Opened Area SW Extension of the A-Zone at Ishkoday Au-Zn-Cu-Ag Project

LAURION Mineral Exploration Inc. (TSXV: LME) (OTCPINK: LMEFF) is ... READ MORE

May 25, 2022

DRILLING DEFINES SECOND GOLD ZONE ALONG 1.4 KM VEIN STRUCTURE AT ASTRA'S PAMPA PACIENCIA PROJECT, CHILE

Astra Exploration Inc. (TSX-V: ASTR) is pleased to provide result... READ MORE

May 25, 2022

Osisko Windfall Drilling Intercepts High-Grade in Multiple Lynx Zones

Osisko Mining Inc. (TSX:OSK) is pleased to provide new analytical... READ MORE

May 25, 2022

Integra Intersects Record Silver Grade at DeLamar: 9.85 g/t AuEq Over 26.97 m, Including 80.40 g/t Au and 14,054 g/t Ag (261.28 g/t AuEq) Over 0.40 m in Potential New, High-Grade Structural Zone at Sullivan Gulch

Drill results from Sullivan Gulch (located on the eastern portion... READ MORE

May 25, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News